Tohoku University · Engineering
Professor Gota Kikugawa's research lab specializes in molecular simulation and materials modeling, with a focus on understanding thermal transport, interfacial phenomena, and polymer cross-linking processes at the atomic scale. The lab employs advanced simulation techniques—particularly molecular dynamics (MD) and dissipative particle dynamics (DPD)—to investigate heat conduction in polymers, self-assembled monolayers, and thermoset resins, with applications in advanced composites and nanomaterials. A key emphasis is placed on developing and applying high-performance computing tools, such as specialized MD hardware (e.g., MDGRAPE-3), to enable large-scale, accurate simulations under realistic conditions like periodic boundary conditions and complex reaction kinetics. The lab also pioneers innovative simulation algorithms that integrate both geometric and kinetic criteria to model chemical reactions more realistically, especially in curing processes of epoxy and thermoset resins.
Figures are computed from collected data and may differ slightly.
We performed molecular dynamics (MD) simulations on amorphous polyethylene (PE) and polystyrene (PS) in order to elucidate the effect of crosslinks between polymer chains on heat conduction. In each polymer system, thermal conductivities were measured for a range of crosslink concentration by using nonequilibrium MD techniques. PE comprised of 50 carbon atom long chains exhibited slightly higher conductivity than that of 250 carbon atom long chains at the standard state. In both cases for PE, cr
In this paper, we present molecular dynamics (MD) simulations of interfaces composed of self-assembled monolayers (SAMs) and solvents in order to investigate the heat transfer characteristics at the interface. Two typical normal alkylthiolate SAMs with different chain lengths, i.e., 1-propanethiol C(3)H(7)SH and 1-dodecanethiol (C(12)H(25)SH) chemically adsorbed on Au(111) substrate surfaces, were used, and toluene was adopted as the organic solvent. In addition to the SAM systems, an interface
In the present study, molecular dynamics (MD) simulations on the monatomic Lennard-Jones liquid in a periodic boundary system were performed in order to elucidate the effect of the computational domain size and shape on the self-diffusion coefficient measured by the system. So far, the system size dependence in cubic computational domains has been intensively investigated and these studies showed that the diffusion coefficient depends linearly on the inverse of the system size, which is theoreti
We describe the application of a special purpose board for molecular dynamics simulations, named MDGRAPE-3, to the problem of simulating periodic bio-molecular systems. MDGRAPE-3 is the latest board in a series of hardware accelerators designed to calculate the nonbonding long-range interactions much more rapidly than normal processors. So far, MDGRAPEs were mainly applied to isolated systems, where very many nonbonded interactions were calculated without any distance cutoff. However, in order t
Epoxy resins are widely used as matrix resins, especially for carbon-fiber-reinforced plastic, due to their outstanding physical and mechanical properties. To date, most research into cross-linking processes using simulation has considered only a distance-based criterion to judge the probability of reaction. In this work, a new algorithm was developed for use with the large-scale atomic/molecular massively parallel simulator (LAMMPS) simulation package to study the cross-linking process; this ne
Thermoset resin, which is commonly used as a matrix in carbon-fiber-reinforced plastic, requires curing procedures. We propose a curing simulation technique involving a dissipative particle dynamics (DPD) simulation, which can simulate a larger system and longer time period than those of conventional all-atom molecular dynamics (AA-MD) simulations. The proposed curing DPD simulation can represent the thermoset resin exothermic reaction process precisely by considering each reactivity according t
In the present study, we use molecular dynamics (MD) simulations to provide an insight into the system size effect on the self-diffusion coefficient of liquids in the periodic rectangular parallelepiped system, from the hydrodynamic perspective. We have previously shown that in the rectangular box system, the diffusivity exhibits anomalous behaviors, i.e., the diffusion tensor appears to be anisotropic despite the bulk liquid simulation and the diffusion component in the direction along the shor
We performed molecular dynamics (MD) simulations of the interface which is comprised of self-assembled monolayer (SAM) and water solvent to investigate heat transfer characteristics. In particular, local thermal boundary conductance (TBC), which is an inverse of so-called Kapitza resistance, at the SAM–solvent interface was evaluated by using the nonequilibrium MD (NEMD) technique in which the one-dimensional thermal energy flux was imposed across the interface. By using two kinds of SAM termina
Open papers in the app to read, cite, and organize with AI.
