Korea University · Engineering
Professor Hyun-Woo Kim's research lab specializes in sustainable bioprocesses for renewable energy and resource recovery, focusing on anaerobic digestion of organic wastes, photoautotrophic microbial cultivation, and advanced bioreactor systems. The lab investigates co-digestion of food waste and sewage sludge to enhance methane production, develops membrane-based carbonation systems for efficient CO₂ delivery in photobioreactors, and explores the optimization of cyanobacterial and algal systems for biomass and bioenergy production. Key research directions include process intensification, nutrient limitation mitigation, and the integration of real-world environmental conditions into bench-scale bioprocesses.
Figures are computed from collected data and may differ slightly.
Food waste has been regarded as the main source of various environmental pollution in Korea due to the high volatile solids (VS) and moisture content caused by the features of dietary habits. The feasibility of food waste as a co-substrate in anaerobic digestion of sewage sludge was investigated in mesophilic and thermophilic conditions using batch tests. Cumulative methane production, dissolved organic carbon (DOC) and volatile fatty acids (VFA) were monitored to find the optimal mixing ratios
In food ink systems in which the particles are dispersed in a hydrocolloid matrix, the source of the particles and the particle content are the main factors affecting the printability and rheological properties of the system. In this study, different contents (10% and 30% w/w) of vegetable (broccoli, spinach, or carrot) powders were added to hydrocolloid matrices with different hydration properties, and their influence on the printability and rheological properties was investigated. At low powde
Microbial photosynthesis presents a valuable opportunity to capture abundant light energy to produce renewable bioenergy and biomaterials. To understand the factors that control the productivity of photosynthetic microorganisms, we conducted a series of semi-continuous experiments using bench-scale photobioreactor (PBR) systems, the cyanobacterium Synechocystis PCC6803 (PCC6803), and light conditions imitating actual day-night light irradiance (LI). Our results demonstrate that using normal BG-1
Abstract Photoautotrophic microorganisms (cyanobacteria and algae) offer high promise as a source of biomass for renewable energy due to their rapid growth rates and high biomass yields. To provide a framework for evaluating the feasibility of growing phototrophic microorganisms with high biomass production rates, we operated a bench‐scale photobioreactor using Synechocystis sp. PCC6803 and with light conditions imitating actual day–night light irradiance (LI). During the time of peak LI, PCC680
A membrane carbonation (MC) module uses bubbleless gas-transfer membranes to supply inorganic carbon (C(i)) for photoautotrophic cyanobacterial growth in a photobioreactor (PBR); this creates the novel MCPBR system, which allows precise control of the CO(2)-delivery rate and minimal loss of CO(2) to the atmosphere. Experiments controlled the supply rate of C(i) to the main PBR by regulating the recirculation rate (Q(R)) between the module of MC chamber and the main PBR. The experiments evaluated
This study was performed to overcome the low efficiency of anaerobic digestion of sewage sludge and food waste by combining temperature-phased digestion, sequencing batch operation, and co-digestion technology. It was demonstrated that the temperature-phased anaerobic sequencing batch reactor (TPASBR) system for the co-digestion of sewage sludge and food waste resulted in enhanced volatile solids (VS) reduction and methane production rate. At the organic loading rate (OLR) of 2.7 g VS/l/d, the T
This study investigated the effects of food waste constituents on thermophilic (55 degrees C) anaerobic codigestion of sewage sludge and food waste by using statistical techniques based on biochemical methane potential tests. Various combinations of grain, vegetable, and meat as cosubstrate were tested, and then the data of methane potential (MP), methane production rate (MPR), and first-order kinetic constant of hydrolysis (kH) were collected for further analyses. Response surface methodology b
Open papers in the app to read, cite, and organize with AI.