Jong Hoon Chung

Nanoscale topography of artificial substrates can greatly influence the fate of stem cells including adhesion, proliferation, and differentiation. Thus the design and manipulation of nanoscale stem cell culture platforms or scaffolds are of great importance as a strategy in stem cell and tissue engineering applications. In this report, we propose that a graphene oxide (GO) film is an efficient platform for modulating structure and function of human adipose-derived stem cells (hASCs). Using a sel

A simple method that uses graphene to fabricate nanotopographic substrata was reported for stem cell engineering. Graphene-incorporated chitosan substrata promoted adhesion and differentiation of human mesenchymal stem cells (hMSCs). In addition, we proposed that nanotopographic cues of the substrata could enhance cell-cell and cell-material interactions for promoting functions of hMSCs.

Bacterial cellulose (BC)-based biomaterials on medical device platforms have gained significant interest for tissue-engineered scaffolds or engraftment materials in regenerative medicine. In particular, BC has an ultrafine and highly pure nanofibril network structure and can be used as an efficient wound-healing platform since cell migration into a wound site is strongly meditated by the structural properties of the extracellular matrix. Here, the fabrication of a nanofibrillar patch by using BC

Gene therapy is the treatment of human disorders by the introduction of genetic material to specific target cells of a patient. Chitosan and its derivatives show excellent biological properties including biocompatibility, biodegradability and nonallergenicity. Primary amines of chitosan are responsible for its cationic nature and hence binding and protection of DNA for intracellular delivery. But the transfection efficiency of chitosan based gene transporters is severely hampered by its poor phy

Most chronic tympanic membrane (TM) perforations require surgical interventions such as tympanoplasty because, unlike with acute perforations, it is very difficult for the perforations to heal spontaneously. The purpose of this study was to develop novel therapeutic techniques and scaffolds that release growth factors to treat chronic TM perforations. We evaluated the cell proliferation effects of the epidermal growth factor (EGF) and fibroblast growth factor (FGF) on in vitro cultures of TM cel

Photobiomodulation (PBM) therapy contributes to pain relief, wound healing, and tissue regeneration. The pulsed wave (PW) mode has been reported to be more effective than the continuous wave (CW) mode when applying PBM to many biological systems. However, the reason for the higher effectiveness of PW-PBM is poorly understood. Herein, we suggest using delayed luminescence (DL) as a reporter of mitochondrial activity after PBM treatment. DL originates mainly from mitochondrial electron transport c

ABSTRACT Adevice using a personal computer for data acquisition was built to determine static and dynamic coefficients of friction of soybeans, red kidney beans and unshelled peanuts. Values were determined for three moisture levels and three types of surfaces. The effects of moisture and surface on the friction values were significant. The data obtained by this digital system were more accurate than those taken by an earlier analog system.

Ultrasound stimulation produces significant multifunctional effects that are directly relevant to alveolar bone formation, which is necessary for periodontal healing and regeneration. We focused to find out effects of specific duty cycles and the percentage of time that ultrasound is being generated over one on/off pulse period, under ultrasound stimulation. Low-intensity pulsed ultrasound ((LIPUS) 1 MHz) with duty cycles of 20% and 50% was used in this study, and human alveolar bone-derived mes

Chronic tympanic membrane (TM) perforations can cause otorrhea. To date, various types of tissue engineering techniques have been applied for the regeneration of chronic TM perforations. However, the application of nanofibers with radially aligned nanostructures and the simultaneous release of growth factors have never been applied in the regeneration of chronic TM perforations. Here, epidermal growth factor (EGF)-releasing radially aligned nanofibrous patches (ERA-NFPs) are developed and applie

This study was performed to investigate the effects of extremely low frequency pulsed electromagnetic fields (ELF-PEMFs) on the proliferation and differentiation of human alveolar bone-derived mesenchymal stem cells (hABMSCs). Osteogenesis is a complex series of events involving the differentiation of mesenchymal stem cells to generate new bone. In this study, we examined not merely the effect of ELF-PEMFs on cell proliferation, alkaline phosphatase (ALP) activity, and mineralization of the extr

Three-dimensional (3D) bioprinting is a technology used to deposit cell-laden biomaterials for the construction of complex tissues. Thermosensitive hydrogels are physically cross-linked by non-covalent interaction without using crosslinkers, facilitating low cytotoxicity and cell viability. Chitosan, which is a non-toxic, biocompatible and biodegradable polysaccharide, can be used as a thermosensitive hydrogel. Therefore, chitosan hydrogel could be of potential use as a 3D bioprinting ink. The p

Chitosan and its derivatives show excellent biological properties, including biocompatibility, biodegradability and non-allergenicity. The primary amines of chitosan are responsible for its cationic nature, which confer its electrostatic binding with anionic DNA and protects from DNA degradation during intracellular delivery. However, its poor physical properties, such as low water solubility and high viscosity, severely hamper the transfection efficiency and in vivo applicability of chitosan ba

Topographic features play a crucial role in the regulation of physiologically relevant cell and tissue functions. Here, an analysis of feature-size-dependent cell-nanoarchitecture interactions is reported using an array of scaffolds in the form of uniformly spaced ridge/groove structures for engineering wound healing. The ridge and groove widths of nanopatterns are varied from 300 to 800 nm and the nanotopography features are classified into three size ranges: dense (300-400 nm), intermediate (5