[论文解读] Pinching-Antenna Systems (PASS): Architecture Designs, Opportunities, and Outlook
本论文引入 Pinching-Antenna Systems (PASS),开发基于夹钳波束成形的架构(非多路复用和多路复用,包含子连接、全连接及相位移器变体),并展示其在类 6G 网络中的潜在收益。
Flexible-antenna systems have recently attracted significant research attention due to their potential to intelligently reconfigure wireless channels. However, the current flexible-antenna systems still suffer from fundamental limitations, such as free-space path loss and line-of-sight blockage. This article introduces a novel flexible-antenna system, termed the Pinching-Antenna SyStem (PASS). PASS adopts the dielectric waveguides as the primary transmission medium and radiates signals into free space by flexibly pinching discrete dielectric particles, referred to as pinching antennas, along the waveguide. By combining the strengths of both wireless and wired communication, PASS effectively mitigates inherent wireless limitations while offering high antenna reconfigurability. This article reviews the key features of PASS in comparison with conventional wireless systems, analyzes its main advantages, and discusses potential designs, transmission architectures, and application scenarios. Finally, it outlines promising research directions and open challenges associated with PASS.
研究动机与目标
- 将 PASS 作为一种灵活的、接近有线的末端无线解决方案来克服路径损耗和遮挡的动机。
- 介绍 PASS 的基础原理:物理原理、信号模型,以及两种功率放大器(PAs)模型。
- 提出实现 PASS 增益的实际传输架构(非多路复用和多路复用)。
- 探索 PASS 在 6G 及更高应用场景,并讨论开放挑战。
提出的方法
- 给出 PASS 物理学:夹钳天线作为被动、位置相关辐射源,利用介质波导的耦合。
- 推导两分量信号模型:波导内传播(损耗可忽略)与自由空间传播,以及等功率或成比例功率模型的 PA。
- 为波束成形和覆盖定义以基站为中心的 PA 部署策略和以用户为中心的 PA 部署策略。
- 描述带有每个波导数据流的数据流与功率分配的非多路复用架构。
- 描述多路复用架构:子连接、全连接,以及基于相位移器的全连接用于三重混合波束成形。
![Figure 1: Comparison between PASS and conventional MIMO systems, along with an illustration of the physical principles underlying PAs and NTT DOCOMO’s prototype (Photo credit: NTT DOCOMO) © CCBY [ 8 ] .](https://ar5iv.labs.arxiv.org/html/2501.18409/assets/x1.png)
实验结果
研究问题
- RQ1如何通过夹钳天线放置来设计以最大化波束成形增益的 PASS?
- RQ2在不同功率模型下,非多路复用与多路复用的 PASS 架构的比较性能如何?
- RQ3哪些应用与部署场景在 6G 及更高版本中最能发挥 PASS 的优势?
- RQ4在建模、硬件设计与优化方面,PASS 面临的实际开放挑战有哪些?
主要发现
- PASS 相较于传统固定位置天线可实现更高的阵列增益,且存在一个最佳的 PA 数量。
- 在 PASS 中联合传输与夹钳波束成形相较于传统 MIMO 可降低发射功率;在仿真中,PASS 展现出显著的功率节省。
- 两种 PA 功率模型(相等与成比例)对性能的影响不同,在某些情形下成比例模型的损失可忽略。
- 三种多路复用方案(子连接、全连接、基于 PS 的全连接)在复杂性与性能之间提供不同的权衡。
- 数值案例研究在特定配置下相较于基线如 5-天线全数字 MIMO 与 30 天线大规模 MIMO 显示显著增益。

阅读本论文
在 Nubint 阅读器中打开原文,边读边就任意段落提问。
在 Nubint 中阅读本论文本解读由 AI 根据论文原文生成,引用前请核对原文。