Jung Kyu Kim

Abstract Solar‐driven photo‐to‐chemical conversion is an interesting approach for energy harvesting and storage with high sustainability. To achieve high photo‐to‐chemical conversion efficiency, it is important to develop cost‐effective and stable catalysts with high activity. Metal oxides provide an interesting platform for the development of efficient catalysts owing to their abundance, high stability, and tunable band edges. Their performance highly depends on the rational design of heterostr

Graphene quantum dots (GQDs) have been considered as a novel material because their electronic and optoelectronic properties can be tuned by controlling the size and the functional groups of GQDs. Here we report the synthesis of reduction-controlled GQDs and their application to bulk heterojunction (BHJ) solar cells with enhanced power conversion efficiency (PCE). Three different types of GQDs--graphene oxide quantum dots (GOQDs), 5 h reduced GQDs, and 10 h reduced GQDs--were tested in BHJ solar

Tungsten trioxide (WO3) films with a mesoporous morphology, high transparency, and monoclinic phase crystallinity were prepared using polyethyleneglycol (PEG) as a surfactant and their photoelectrochemical properties were measured. By controlling the weight ratio of the tungsten precursor to PEG, a sphere-like WO3 nanoparticle film with high transparency can be synthesized. The photocurrent responses of the films under 1 sun solar light illumination were measured. Due to the high transparency of

Abstract Plasmonic metal nanostructures have been extensively investigated to improve the performance of metal oxide photoanodes for photoelectrochemical (PEC) solar water splitting cells. Most of these studies have focused on the effects of those metal nanostructures on enhancing light absorption and enabling direct energy transfer via hot electrons. However, several recent studies have shown that plasmonic metal nanostructures can improve the PEC performance of metal oxide photoanodes via anot

The design of nonprecious bifunctional electrocatalysts with high activity and prolonged durability in a wide pH range is essential for the development of the highly efficient, cost-effective, and simplified overall water splitting systems. Here, we report core-shell structured MXene@carbon (MX@C) nanodot hybrids with high bifunctional activity, where N-doped carbon shells are grown in a heteroepitaxial manner strongly interacting with the MXene core. The resulting MX@C nanodot hybrids show enha

Abstract To further increase the open‐circuit voltage ( V oc ) of perovskite solar cells (PSCs), many efforts have been devoted to doping the TiO 2 electron transport/selective layers by using metal dopants with higher electronegativity than Ti. However, those dopants can introduce undesired charge traps that hinder charge transport through TiO 2 , so the improvement in the V oc is often accompanied by an undesired photocurrent density–voltage ( J–V ) hysteresis problem. Herein, it is demonstrat

Abstract Ammonia is considered as an alternative fuel resource for a sustainable green future. The production of ammonia involves the electrochemical nitrogen reduction reaction (NRR), which has gained considerable attention due to its eco-friendly resources and nonharmful byproducts. Even with the manifold works on NRR, the technique has not reached the industrial scale because of the impediments of NRR electrocatalysts, and in addition, state-of-the-art electrocatalysts have not yet been disco

PSS hole extraction layer, leading to significantly improved short circuit current density (Jsc) value. To maximize the PCE of the device, hydrophobic GQDs that are hydrothermally reduced (rGQD) were additionally incorporated in a bulk-heterojunction layer, which is found to promote a synergistic effect with the GQD-incorporated hole extraction layer.

Polymer light emitting diodes (PLEDs) using quantum dots (QDs) as emissive materials have received much attention as promising components for next-generation displays. Despite their outstanding properties, toxic and hazardous nature of QDs is a serious impediment to their use in future eco-friendly opto-electronic device applications. Owing to the desires to develop new types of nano-material without health and environmental effects but with strong opto-electrical properties similar to QDs, grap

Abstract N‐type metal oxides such as hematite (α‐Fe 2 O 3 ) and bismuth vanadate (BiVO 4 ) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised

As a <i>p</i>-type metal oxide, nickel oxide (NiO) has been extensively utilized for providing a favorable hole transport pathway in organic solar cells (OSCs). To obtain higher crystallinity, a post-annealing process at high temperature is required for the NiO layer. Therefore, fluorine-doped tin oxide (FTO) glass has been widely used for the substrate of NiO. However, the rough surface of the FTO substrate deteriorates the interfacial properties of the NiO layer, which hinders efficient charge