Roman Selyanchyn

In this work, we deposited a CO₂-selective block copolymer, Pebax-1657, as a selective layer with a thickness of 2-20 nm on the oxygen plasma-activated surface of poly(dimethylsiloxane) (PDMS) used as a gutter layer (thickness ∼400 nm). This double-layered structure was subsequently transferred onto the polyacrylonitrile (PAN) microporous support and studied for CO₂/N₂ separation. The effect of interfacial molecular arrangements between the selective and gutter l

The effect of thickness in multilayer thin-film composite membranes on gas permeation has received little attention to date, and the gas permeances of the organic polymer membranes are believed to increase by membrane thinning. Moreover, the performance of defect-free layers with known gas permeability can be effectively described using the classical resistance in series models to predict both permeance and selectivity of the composite membrane. In this work, we have investigated the Pebax<sup>®

Enhancing the fluxes in gas separation membranes is required for utilizing the membranes on a mass scale for CO₂ capture. Membrane thinning is one of the most promising approaches to achieve high fluxes. In addition, sophisticated molecular transport across membranes can boost gas separation performance. In this review, we attempt to summarize the current state of CO₂ separation membranes, especially from the viewpoint of thinning the selective layers and the membrane itsel

Quartz crystal microbalance (QCM) sensor array was developed for multi-purpose human respiration assessment. The sensor system was designed to provide feedback for human respiration. Thorough optimization of measurement conditions: air flow, temperature in the QCM chamber, frequency measurement rate, and electrode position regarding to the gas flow-was performed. As shown, acquisition of respiratory parameters (rate and respiratory pattern) could be achieved even with a single electrode used in

Inorganic–organic nanocomposite hybrids containing zirconium dioxide (ZrO2) as inorganic cross-linker/filler and polydimethylsiloxane (PDMS) as a polymeric matrix have been synthesized using the in situ sol–gel reaction between silanol-terminated PDMS and zirconium normal butoxide (Zr(OC4H9)4). Hybrid materials were used to fabricate gas separation membranes which were characterized by scanning electron microscopy, dynamic scanning calorimetry, nanoindentation, ATR-FTIR, and XPS spectroscopies.

Nanocellulose is a sustainable material which holds promise for many energy-related applications. Here, nanocrystalline cellulose is used to prepare proton exchange membranes (PEMs). Normally, this nanomaterial is highly dispersible in water, preventing its use as an ionomer in many electrochemical applications. To solve this, we utilized a sulfonic acid crosslinker to simultaneously improve the mechanical robustness, water-stability, and proton conductivity (by introducing -SO₃<sup>-

A respiratory monitoring system based on a quartz crystal microbalance (QCM) sensor with a functional film was designed and investigated. Porphyrins 5,10,15,20-tetrakis-(4-sulfophenyl)-21H,23H-porphine (TSPP) and 5,10,15,20-tetrakis-(4-sulfophenyl)-21H, 23H-porphine manganese (III) chloride (MnTSPP) used as sensitive elements were assembled with a poly(diallyldimethyl ammonium chloride) (PDDA). Films were deposited on the QCM resonators using layer-by-layer method in order to develop the sensor.

An evanescent-wave optical fibre sensor modified with tetrakis-(4-sulfophenyl) porphine (TSPP) and poly(allylamine hydrochloride) (PAH) bilayers using layer-by-layer (LbL) electrostatic self-assembly was tested to measure the gas emitted from human skin. Optical intensity changes at different wavelengths in the transmission spectrum of the porphyrin-based film were induced by the human skin gas and measured as sensor response. Influence of relative humidity, which can be a major interference to

Here we report a preferential CO₂separation membrane consisting of a nanometer-thick TiO₂layer incorporated with phtalic acid (PA) molecules on polydimethylsiloxane (PDMS) (PA@TiO₂/PDMS).

Nanocellulose membranes based on tunicate-derived cellulose nanofibers, starch, and ~5% wood-derived lignin were investigated using three different types of lignin. The addition of lignin into cellulose membranes increased the specific surface area (from 5 to ~50 m²/g), however the fine porous geometry of the nanocellulose with characteristic pores below 10 nm in diameter remained similar for all membranes. The permeation of H₂, CO₂, N₂, and O<sub>2</s

An analytical TD-GC-MS method was developed and used for the assessment of volatile organic compounds (VOCs) released from the blood plasma of dogs with/without cancer. VOCs released from 40 samples of diseased blood and 10 control samples were compared in order to examine the difference between both sample groups that were showing qualitatively similar results independent from the disease's presence. However, mild disturbances in the spectra of dogs with cancer in comparison with the control gr

The transport of small gases (H₂, CO₂, N₂, O₂) through a series of novel membranes based on necklace-shaped inorganic polymers (DMS@POSS), in which a polyhedral oligomeric silsesquioxane (POSS) cage unit and soft chains of oligo-dimethyl siloxane (DMS) were alternately connected, was investigated. The influence of the DMS chain length and crosslinking density of the DMS@POSS on membrane properties were studied. The membranes revealed characteristic str