Han-Yeong Woo

New semi-crystalline photovoltaic polymers were synthesized and the optimized device exhibited 9.39% efficiency in a ∼300 nm thick single-cell device.

Abstract Recent advances in nonfullerene acceptors (NFAs) have enabled the rapid increase in power conversion efficiencies (PCEs) of organic photovoltaic (OPV) cells. However, this progress is achieved using highly toxic solvents, which are not suitable for the scalable large‐area processing method, becoming one of the biggest factors hindering the mass production and commercial applications of OPVs. Therefore, it is of great importance to get good eco‐compatible processability when designing ef

A new acceptor–donor–acceptor‐structured nonfullerene acceptor ITCC (3,9‐bis(4‐(1,1‐dicyanomethylene)‐3‐methylene‐2‐oxo‐cyclopenta[ b ]thiophen)‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐dithieno[2,3‐ d ′:2,3‐ d′ ]‐s‐indaceno[1,2‐ b :5,6‐ b′ ]‐dithiophene) is designed and synthesized via simple end‐group modification. ITCC shows improved electron‐transport properties and a high‐lying lowest unoccupied molecular orbital level. A power conversion efficiency of 11.4% with an impressive V OC of over 1 V is

The molecular weight of a conjugated polymer is one of the key factors determining the electrical, morphological, and mechanical properties as well as its solubility in organic solvents and miscibility with other polymers. In this study, a series of semicrystalline poly[(2,5-bis(2-hexyldecyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole)] (PPDT2FBT) polymers with different number-average molecular weights (M(n)'s) (PPDT2FBT(L), M(n) = 12 kg/mol; PPDT2FBT(M), M(n

A highly efficient fullerene-free polymer solar cell (PSC) based on PDCBT, a polythiophene derivative substituted with alkoxycarbonyl, achieves an impressive power conversion efficiency of 10.16%, which is the best result in PSCs based on polythiophene derivatives to date. In comparison with a poly(3-hexylthiophene):ITIC-based device, the photovoltaic and morphological properties of the PDCBT:ITIC-based device are carefully investigated and interpreted.

A series of organic- and water-soluble distyrylbenzene-based two-photon absorption (TPA) fluorophores containing dialkylamino donor groups at the termini was designed, synthesized, and characterized. The central core was systematically substituted to modulate intramolecular charge transfer (ICT). These molecules allow an examination of solvent effects on the TPA cross section (delta) and on the TPA action cross section. In toluene, the delta values follow the order of ICT strength. The effect of

Abstract A series of ternary organic photovoltaics (OPVs) are fabricated with one wide bandgap polymer D18-Cl as donor, and well compatible Y6 and Y6-1O as acceptor. The open-circuit-voltage (VOC) of ternary OPVs is monotonously increased along with the incorporation of Y6-1O, indicating that the alloy state should be formed between Y6 and Y6-1O due to their excellent compatibility. The energy loss can be minimized by incorporating Y6-1O, leading to the VOC improvement of ternary OPVs. By finely

Interface engineering by combination of TiOx and a conjugated polyelectrolyte as an electron transport layer modifies the electrical contact between a metal electrode and an organic active layer with well-aligned frontier orbital energy levels for efficient charge transport. This results in remarkable improvements in the device performance of inverted polymer solar cells and polymer light-emitting diodes. Detailed facts of importance to specialist readers are published as ”Supporting Information

Despite the recent breakthroughs of polymer solar cells (PSCs) exhibiting a power conversion efficiency of over 17%, toxic and hazardous organic solvents such as chloroform and chlorobenzene are still commonly used in their fabrication, which impedes the practical application of PSCs. Thus, the development of eco-friendly processing methods suitable for industrial-scale production is now considered an imperative research focus. This Review provides a roadmap for the design of efficient photoacti

Development of high-performance unipolar n-type organic semiconductors still remains as a great challenge. In this work, all-acceptor bithiophene imide-based ladder-type small molecules BTI n and semiladder-type homopolymers PBTI n ( n = 1-5) were synthesized, and their structure-property correlations were studied in depth. It was found that Pd-catalyzed Stille coupling is superior to Ni-mediated Yamamoto coupling to produce polymers with higher molecular weight and improved polymer quality, thu

A well-organized donor–acceptor crystalline structure is examined for high ­performance nonfullerene solar cells. By thermal annealing, nanoscale structures of both donor and acceptor domains are successfully modulated, followed by ­significant changes in the resulting ­photovoltaic characteristics. When annealed at 90 °C, a maximum power conversion efficiency of 7.64% with a ­remarkable open-circuit voltage of 1.03 V is obtained. As a service to our authors and readers, this journal provides su

Two wide band gap polymer donors were developed for fullerene-free polymer solar cells. The photovoltaic performance of the PB3T:IT-M device processed by anisole achieved a high PCE of 11.9%.

Despite the excellent work function adjustability of conjugated polyelectrolytes (CPEs), which induce a vacuum level shift via the formation of permanent dipoles at the CPE/metal electrode interface, the exact mechanism of electron injection through the CPE electron transport layer (ETL) remains unclear. In particular, understanding the ionic motion within the CPE ETLs when overcoming the sizable injection barrier is a significant challenge. Because the ionic functionality of CPEs is a key compo

We report a series of benzotriazole-based semicrystalline π-conjugated polymers with noncovalent conformational locks for applications in polymer field-effect transistors. The benzotriazole moiety is a versatile electron-deficient building block that offers two chemically functionalizable sites, 2(N) and 5, 6(C) positions, allowing easy modulation of the solution processability and electronic structures of the resulting polymers. Fluorine or alkoxy substituents were introduced to the benzotriazo

Abstract Two new bithiophene imide (BTI)‐based n‐type polymers were synthesized. f‐BTI2‐FT based on a fused BTI dimer showed a smaller band gap, a lower LUMO, and higher crystallinity than s‐BTI2‐FT containing a BTI dimer connected through a single bond. s‐BTI2‐FT exhibited a remarkable electron mobility of 0.82 cm 2 V −1 s −1 , and f‐BTI2‐FT showed a further improved mobility of 1.13 cm 2 V −1 s −1 in transistors. When blended with the polymer donor PTB7‐Th, f‐BTI2‐FT‐based all‐polymer solar ce