Jihoon Chung

The Nd2Fe14B alloy has been successfully synthesized by nitrate-citrate auto-combustion followed by the reduction and diffusion process with low energy consumption. H3BO3, Fe(NO3)3·9H2O, and Nd(NO3)3·6H2O were used as precursors and citric acid was used as the chelating ligand of metal ions. Ammonia water was used to adjust pH to 7. CaH2 was used as a reducing agent for the reduction and diffusion process. NdFeO3 and Fe2O3 were produced during auto-combustion of gel. The combustion process of th

Nd₂Fe₁₄B hard phase magnetic nanoparticles were successfully synthesized using a chemical synthesis route followed by a reduction and diffusion process without consuming a large amount of energy.

The effect of hydrogen co-firing on the performance and operating conditions of gas turbines (GTs) and gas turbine combined cycles (GTCCs) was investigated. Two operating scenarios were applied, and off-design analyses were conducted for three GTs with different turbine inlet temperatures (TITs). In the first scenario, the TIT was kept constant. As the hydrogen co-firing ratio increases, the pressure ratio of GT increased, and the power outputs of both GT and GTCC increased. With 100 % hydrogen

The demand for clean energy continues to increase as the human society becomes more aware of environmental challenges such as global warming. Various power systems based on high-temperature fuel cells have been proposed, especially hybrid systems combining a fuel cell with a gas turbine (GT), and research on carbon capture and storage (CCS) technology to prevent the emission of greenhouse gases is already underway. This study suggests a new method to innovatively enhance the efficiency of a molt