[论文解读] Resilient Chaotic Cross-Layer Routing for Smart Grid IoT Networks
引入 DAMCR,一种分布式双无线电跨层路由框架,结合混沌频率跳变、自适应功率控制与协作中继,在异构智能电网物联网网络中实现高可靠性与低时延。
This paper presents the Distributed Adaptive Multi-Radio Cross-Layer Routing (DAMCR) protocol, designed to enhance reliability, adaptability, and energy efficiency in smart grid and industrial Internet of Things (IoT) communication networks. DAMCR integrates Chaotic Frequency-Hopping Spread Spectrum (C-FHSS) to improve physical-layer security and jamming resilience with Link-Adaptive Quality Power Control (LAQPC) to dynamically regulate transmission power based on instantaneous link quality and residual node energy. To meet heterogeneous traffic requirements, the protocol incorporates priority-aware message classification that differentiates between periodic monitoring data and time-critical fault and protection messages. The proposed framework is implemented and evaluated in MATLAB using a heterogeneous network composed of LoRa, Wi-Fi, and dual-radio nodes operating under AWGN, Rayleigh, and Rician fading environments. Extensive simulation results demonstrate that DAMCR consistently achieves a Packet Delivery Ratio (PDR) exceeding 95% across all evaluated scenarios, while maintaining end-to-end latency between 17 and 23 ms, even in the presence of controlled jamming attacks. These results confirm that the tight integration of chaos-based spectrum agility, cross-technology routing, and energy-aware cross-layer adaptation significantly improves communication reliability, latency stability, and resilience compared to conventional single-radio and static-routing protocols.
研究动机与目标
- 解决具有异构无线电(LoRa 与 Wi-Fi)的智能电网物联网网络中的可靠性、时延和能源效率问题。
- 通过实现完全分布式路由和自愈能力,消除中心化故障点。
- 通过混沌频率跳变与频谱灵活性提升对干扰的安全性与弹性。
- 提供能量感知路由与协作多样性,以支撑大规模部署。
提出的方法
- 使用基于逻辑斯谛映射的跳频的混沌频率跳变扩频(C-FHSS)以抵御干扰。
- 链路自适应质量功率控制(LAQPC)在保持目标信噪比(SNR)的同时平衡能量消耗。
- 将 LoRa 与 Wi-Fi 的双无线电异构路由整合,形成分布式骨干。
- 组合路由权重 Wij = α(1−Psucc,ij) + β Ei−1,用于选择可靠且能量平衡的链路。
- 协作中继,采用解码前向(decode-and-forward)并且中继概率 pr = 0.25;时间反转(TR)信道聚焦以实现多径增益。

实验结果
研究问题
- RQ1一个使用混沌光谱访问与能量感知路由的完全分布式跨层框架,能否在异构智能电网物联网网络中实现高可靠性?
- RQ2在不同衰落条件与干扰下,集成混沌 FHSS、LAQPC 与协作多样性对时延、可靠性与能耗的影响是什么?
- RQ3在攻击场景下,与现有 Wi-Fi/LoRa 路由协议相比,DAMCR 在端到端吞吐量(PDR)和端到端时延方面的表现如何?
主要发现
| Nodes | Fading | Attack | SNR | PDR | Latency | Energy | Hops |
|---|---|---|---|---|---|---|---|
| 30 | AWGN | None | 47.2 | 0.994 | 20.7 | 0.112 | 2.07 |
| 30 | AWGN | Jam | 48.6 | 0.982 | 22.6 | 0.149 | 2.26 |
| 60 | Rayleigh | None | 49.5 | 0.990 | 17.3 | 0.096 | 1.73 |
| 100 | Rician | None | 52.7 | 0.999 | 18.0 | 0.110 | 1.80 |
- 在被干扰的多种情景下,DAMCR 的分组传递成功率(PDR)始终保持在 95% 以上。
- 在不同衰落环境和密度下,端到端时延维持在 17-23 ms 之间。
- 在无干扰环境中,PDR 常常超过 99%,且在 AWGN、瑞利衰落与瑞克逊衰落下仍保持较高水平。
- 与选定的传统协议相比,DAMCR 的 PDR 最高提升约 10%,且时延降低约 50%。
- 在分布式路由和能量感知负载均衡下,框架可扩展至节点数 N = 500 的规模。

更好的研究,从现在开始
从论文设计到论文写作,大幅缩短您的研究时间。
无需绑定信用卡
本解读由 AI 生成,并经人工编辑审核。