Byeong‐Kwon Ju

A large plasmonic color filter (PCF) is fabricated via a simple and cost-effective method. The aluminum surfaces are surrounded by lithium fluoride with the penetration depth scaled to match the surface plasmon modes efficiently, resulting in high transmittance. All filters of primary colors show peak transmittance at the wavelength regions corresponding to those determined in calculations. As a service to our authors and readers, this journal provides supporting information supplied by the auth

Abstract Herein, a simple and facile strategy is described to obtain chiroptically active semiconductor thin films by blending of poly(3‐alkylthiophene)s, which are conventional achiral polymer semiconductors, and 1,1′‐binaphthyl (BN), a versatile chiral molecule. As expected, the intermolecular interaction between the two materials is important to extend the chirality of the binaphthyl molecules to the hybrid films. The controlled phase separation and crystallization of poly[3‐(6‐carboxyhexyl)t

Because of outstanding optical properties and non‐vacuum solution processability of colloidal quantum dot (QD) semiconductors, many researchers have developed various light emitting diodes (LEDs) using QD materials. Until now, the Cd‐based QD‐LEDs have shown excellent properties, but the eco‐friendly QD semiconductors have attracted many attentions due to the environmental regulation. And, since there are many issues about the reliability of conventional QD‐LEDs with organic charge transport lay

In this paper, nanoimprint lithography was utilized to transfer a nano-pattern (NP) onto a homeotropic polyimide (PI) surface for use in liquid crystal displays (LCDs). The nano-patterned silicon mold was fabricated by laser interference lithography. A NP PI layer acted as the homeotropic alignment layer to easily and uniformly align the liquid crystal (LC) molecules. A NP LC cell with a NP PI layer was successfully operated as a vertical aligned LCD, and its performance was evaluated. The thres

Ni1−xZnxFe2O4 (x = 0.5, 0.6, 0.7) nanoparticles were synthesized by a thermal decomposition method. The synthesized particles were identified as pure spinel ferrite structures by X-ray diffraction analysis, and they were calculated to be 46–51 nm in diameter by the Scherrer equation, depending on the composition. In the FE-SEM image, the ferrite nanoparticles have spherical shapes with slight agglomeration, and the particle size is about 50 nm, which was consistent with the value obtained by the

A phenomenon is observed in which the electrochemical performances of porous graphene electrodes show unexpectedly increasing capacities in the Li storage devices. However, despite many studies, the cause is still unclear. Here, we systematically present the reason for the capacity enhancements of the pristine graphene anode under functional group exclusion through morphological control and crystal structure transformation. The electrochemical synergy of both the edge effect and surface effect o