Korea University · Engineering
정숙하 교수의 연구실은 유연하고 신축성 있는 전자소자 및 생체통합형 센서 기술을 핵심으로 하며, 스트레처블 전자기기, 생체신호 모니터링을 위한 전자화학 센서, 생분해 가능한 마이크로스토리지 장치 개발에 주력하고 있습니다. 특히 그래핀 폼, 탄소 나노튜브, 폴리머 기반 복합재료를 활용한 고감도 센서 및 초소형 슈퍼커퍼시터의 설계와 제작 기술이 핵심입니다. 연구는 의료용 웨어러블 기기와 생체 친화성 소재의 통합을 목표로 하며, 실제 생체 환경에서의 안정성과 내구성을 확보하는 데 초점을 맞추고 있습니다.
Figures are computed from collected data and may differ slightly.
Stretchable electronics have recently been extensively investigated for the development of highly advanced human‐interactive devices. Here, a highly stretchable and sensitive strain sensor is fabricated based on the composite of fragmentized graphene foam (FGF) and polydimethylsiloxane (PDMS). A graphene foam (GF) is disintegrated into 200–300 μm sized fragments while maintaining its 3D structure by using a vortex mixer, forming a percolation network of the FGFs. The strain sensor shows high sen
A stretchable polyaniline nanofiber temperature sensor array with an active matrix consisting of single-walled carbon nanotube thin-film transistors is demonstrated. The integrated temperature sensor array gives mechanical stability under biaxial stretching of 30%, and the resultant spatial temperature mapping does not show any mechanical or electrical degradation.
As part of increased efforts to develop wearable healthcare devices for monitoring and managing physiological and metabolic information, stretchable electrochemical sweat sensors have been investigated. In this study, we report on the fabrication of a stretchable and skin-attachable electrochemical sensor for detecting glucose and pH in sweat. A patterned stretchable electrode was fabricated via layer-by-layer deposition of carbon nanotubes (CNTs) on top of patterned Au nanosheets (AuNS) prepare
In this work, the authors report materials, fabrication strategies, and applications of biodegradable microsupercapacitors (MSCs) built using water‐soluble (i.e., physically transient) metal (W, Fe, and Mo) electrodes, a biopolymer, hydrogel electrolyte (agarose gel), and a biodegradable poly(lactic‐ co ‐glycolic acid) substrate, encapsulated with polyanhydride. During repetitive charge/discharge cycles, the electrochemical performance of these unusual MSCs is dramatically enhanced, following fr
Abstract This study reports on the fabrication of pressure/temperature/strain sensors and all‐solid‐state flexible supercapacitors using only polydimethylsiloxane coated microporous polypyrrole/graphene foam composite (PDMS/PPy/GF) as a common material. A dual‐mode sensor is designed with PDMS/PPy/GF, which measures pressure and temperature with the changes of current and voltage, respectively, without interference to each other. The fabricated dual‐mode sensor shows high sensitivity, fast respo
Materials and methods to achieve electronics intimately integrated on the surfaces of substrates with complex, curvilinear shapes are described. The approach exploits silicon membranes in circuit mesh structures that can be deformed in controlled ways using thin, elastomeric films. Experimental and theoretical studies of the micromechanics of such curvilinear electronics demonstrate the underlying concepts. Electrical measurements illustrate the high yields that can be obtained. The results repr
In this study, we report on the development of a stretchable, transparent, and skin-attachable strain sensor integrated with a flexible electrochromic device as a human skin-inspired interactive color-changing system. The strain sensor consists of a spin-coated conductive nanocomposite film of poly(vinyl alcohol)/multi-walled carbon nanotube/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) on a polydimethylsiloxane substrate. The sensor exhibits excellent performance of high sensitivity,
We report on air stable planar micro-supercapacitors (MSCs) using a non-aqueous solvent based gel electrolyte and stable performance of encapsulated MSC array under stretching and exposure to water.
Abstract The facile fabrication of thin and foldable self‐healing electronics on a poly(vinyl alcohol)/cellulose nanocrystal (PVA/CNC) composite film is reported. The self‐healing property of the PVA/CNC nanocomposite film can be activated by spraying water on the film surface, via dynamic formation of hydrogen bonding. The self‐healing efficiency of PVA/CNC is influenced by the content of CNC in the film, pH of the spraying solution, and the temperature. Via vacuum filtration and pattern transf
Textile-based electronics have attracted much attention as they can perfectly combine the functionality of wearable devices with the soft and comfortable properties of flexible textile fibers. In this work, we report a dynamically stretchable high-performance supercapacitor for powering an integrated sensor in an all-in-one textile system to detect various biosignals. The supercapacitor fabricated with MWCNT/MoO<sub>3</sub> nanocomposite electrodes and nonaqueous gel electrolyte, along the cours
A stretchable multisensor system is successfully demonstrated with an integrated energy-storage device, an array of microsupercapacitors that can be repeatedly charged via a wireless radio-frequency power receiver on the same stretchable polymer substrate. The integrated devices are interconnected by a liquid-metal interconnection and operate stably without noticeable performance degradation under strain due to the skin attachment, and a uniaxial strain up to 50%.
A foldable array of patterned graphene/ZnO nanoparticle UV sensor and asymmetric micro‐supercapacitors (AMSCs) integrated on a paper substrate with patterned liquid metal interconnections is reported. The resistor type UV sensor based on graphene/ZnO nanoparticles is patterned to be driven by the stored energy of the integrated AMSCs. The AMSC consists of MnO 2 nanoball deposited multiwalled carbon nanotubes (MWNTs) and V 2 O 5 wrapped MWNTs as positive and negative electrodes, respectively. As
Open papers in the app to read, cite, and organize with AI.