Jian Ping Gong

Very strong hydrogels (with a fracture strength of some tens of MPa) , as required for both industrial and biomedical applications, have been generated by inducing a double‐network (DN) structure for various combinations of hydrophilic polymers. The Figure shows a hydrogel before, during, and after application of a fracture stress of 17.2 MPa.

Double-network (DN) gels have drawn much attention as an innovative material having both high water content (ca. 90 wt%) and high mechanical strength and toughness. DN gels are characterized by a special network structure consisting of two types of polymer components with opposite physical natures: the minor component is abundantly cross-linked polyelectrolytes (rigid skeleton) and the major component comprises of poorly cross-linked neutral polymers (ductile substance). The former and the latte

The double network (DN) technique, developed by authors’ group, provides an innovative and universal pass way to fabricate hydrogels with super high toughness comparable to rubbers. The excellent mechanical performances of DN hydrogels originate from the specific combination of two networks with contrasting structures. The first brittle network serves as sacrificial bonds, which breaks into small clusters to efficiently disperse the stress around the crack tip into the surrounding damage zone, w

A series of tough polyion complex hydrogels is synthesized by sequential homopolymerization of cationic and anionic monomers. Owing to the reversible interpolymer ionic bonding, the materials are self-healable under ambient conditions with the aid of saline solution. Furthermore, self-glued bulk hydrogels can be built from their microgels, which is promising for 3D/4D printing and the additive manufacturing of hydrogels.

A series of physical double-network hydrogels is synthesized based on an amphiphilic triblock copolymer. The gel, which contains strong hydrophobic domains and sacrificial dynamic bonds of hydrogen bonds, is stiff and tough, and even stiffens in concentrated saline solution. Furthermore, due to its supramolecular structure, the gel features improved self-healing and self-recovery abilities.

Tough elastomers are created by adapting an approach previously used for hydrogels. [Also see Report by Ducrot et al. ]

Biological connective tissues, such as cartilage and corneal stroma, are essentially hydrogels consisting of fibrous collagen and proteoglycans. Little is known of the surface properties of the hydrogel, although we observe fascinating tribological behavior in biological soft tissues, such as extremely low friction between animal cartilages. We consider that the role of the solvated polymer network existing in the extracellular matrix as a gel state is critically important in the specific fricti

Natural structural materials (such as tendons and ligaments) are comprised of multiscale hierarchical architectures, with dimensions ranging from nano- to macroscale, which are difficult to mimic synthetically. Here a bioinspired, facile method to fabricate anisotropic hydrogels with perfectly aligned multiscale hierarchical fibrous structures similar to those of tendons and ligaments is reported. The method includes drying a diluted physical hydrogel in air by confining its length direction. Du

Hydrogels have promising applications in diverse areas, especially wet environments including tissue engineering, wound dressing, biomedical devices, and underwater soft robotics. Despite strong demands in such applications and great progress in irreversible bonding of robust hydrogels to diverse synthetic and biological surfaces, tough hydrogels with fast, strong, and reversible underwater adhesion are still not available. Herein, a strategy to develop hydrogels demonstrating such characteristi

A novel anisotropic hydrogel, consisting of lamellar bilayers and a polymer network, with unidirectional alignment of the bilayer structure has been synthesized. The unidirectional orientation of bilayer in the gels leads to one-dimensional swelling, strong anisotropy in elastic modulus, and exhibits excellent visible color. The gel shows reversibly tunable structural color under mechanical stimulation and could be the basis for a deformation-based color display.

ADVERTISEMENT RETURN TO ISSUEPREVCommunicationNEXTSynthesis of Hydrogels with Extremely Low Surface FrictionJian Ping Gong, Takayuki Kurokawa, Tetsuharu Narita, Go Kagata, Yoshihito Osada, Goro Nishimura, and Masataka KinjoView Author Information Division of Biological Sciences, Graduate School of Science Hokkaido University, Sapporo 060-0810, Japan Cite this: J. Am. Chem. Soc. 2001, 123, 23, 5582–5583Publication Date (Web):May 16, 2001Publication History Received20 October 2000Published online1

Electrowetting-on-dielectric (EWOD) actuation enables digital (or droplet) microfluidics where small packets of liquids are manipulated on a two-dimensional surface. Due to its mechanical simplicity and low energy consumption, EWOD holds particular promise for portable systems. To improve volume precision of the droplets, which is desired for quantitative applications such as biochemical assays, existing practices would require near-perfect device fabrication and operation conditions unless the

Recently, polyampolytes have been discovered to form hydrogels that possess high toughness, full resilience, and self-healing between two cut surfaces. The self-healing of this class of hydrogels is based on the re-forming of the multiple ionic bonds at the fractured surfaces, in which the mobility of the polymer segments and strength of the ionic bonds play an important role. In this work, we study the effects of healing temperature and chemistry of the polyampholyte hydrogels (chemical cross-l