Ki Jae Kim

Aqueous zinc ion batteries are receiving increasing attention for large-scale energy storage systems owing to their attractive features with respect to safety, cost, and scalability. Although vanadium oxides with various compositions have been demonstrated to store zinc ions reversibly, their limited cyclability especially at low current densities and their poor calendar life impede their widespread practical adoption. Herein, we reveal that the electrochemically inactive zinc pyrovanadate (ZVO)

A new approach for enhancing the electrochemical performance of carbon felt electrodes by employing non-precious metal oxides is designed. The outstanding electro-catalytic activity and mechanical stability of Mn(3)O(4) are advantageous in facilitating the redox reaction of vanadium ions, leading to efficient operation of a vanadium redox flow battery.

In lithium metal batteries, electrolytes containing a high concentration of salts have demonstrated promising cyclability, but their practicality with respect to the cost of materials is yet to be proved. Here we report a fluorinated aromatic compound, namely 1,2-difluorobenzene, for use as a diluent solvent in the electrolyte to realize the "high-concentration effect". The low energy level of the lowest unoccupied molecular orbital (LUMO), weak binding affinity for lithium ions, and high fluori

ConspectusAll-solid-state batteries (ASSBs) are considered to be a next-generation energy storage concept that offers enhanced safety and potentially high energy density. The identification of solid electrolytes (SEs) with high ionic conductivity was the stepping-stone that enabled the recent surge in activity in this research area. Among the various types of SEs, including those based on oxides, sulfides, polymers, and hybrids thereof, sulfide-based SEs have gained discernible attention owing t

Although the exceptional theoretical specific capacity (1672 mAh g −1 ) of elemental sulfur makes lithium–sulfur (Li–S) batteries attractive for upcoming rechargeable battery applications (e.g., electrical vehicles, drones, unmanned aerial vehicles, etc.), insufficient cycle lives of Li–S cells leave a substantial gap before their wide penetration into commercial markets. Among the key features that affect the cyclability, the shuttling process involving polysulfides (PS) dissolution is most fat

Abstract Lithium metal anodes are steadily gaining more attention, as their superior specific capacities and low redox voltage can significantly increase the energy density of rechargeable batteries far beyond those of current Li‐ion batteries. Nonetheless, the relevant technology is still in a premature research stage mainly due to the uncontrolled growth of Li dendrites that ceaselessly cause unwanted side reactions with electrolyte. In order to circumvent this shortcoming, herein, an ionic li

The effects of surface treatment combining corona discharge and hydrogen peroxide (H2O2) on the electrochemical performance of carbon felt electrodes for vanadium redox flow batteries (VRFBs) have been thoroughly investigated. A high concentration of oxygen functional groups has been successfully introduced onto the surface of the carbon felt electrodes by a specially designed surface treatment, which is mainly responsible for improving the energy efficiency of VRFBs. In addition, the wettabilit

Abstract Nickel‐rich layered cathode materials are predominantly used for lithium‐ion batteries intended for electric vehicles owing to their high specific capacities and minimal use of high‐cost cobalt. The intrinsic drawbacks of nickel‐rich layered cathode materials with regard to cycle life and safety have largely been addressed by doping and by applying surface coatings. Here, it is reported that a highly elastic binder, namely spandex, can overcome the problems of nickel‐rich layered cathod

A newly prepared type of carbon felt with oxygen-rich phosphate groups is proposed as a promising electrode with good stability for all-vanadium redox flow batteries (VRFBs). Through direct surface modification with ammonium hexafluorophosphate (NH4 PF6 ), phosphorus can be successfully incorporated onto the surface of the carbon felt by forming phosphate functional groups with -OH chemical moieties that exhibit good hydrophilicity. The electrochemical reactivity of the carbon felt toward the re

Regulating the morphology of lithium plating is the key to extending the cycle life of lithium metal batteries. Fatal dendritic growth is closely related to out-of-plane nucleation on the lithium metal surface. Herein, we report a nearly perfect lattice match between the lithium metal foil and lithium deposits by removing the native oxide layer using simple bromine-based acid-base chemistry. The naked lithium surface induces homo-epitaxial lithium plating with columnar morphologies and lower ove

Despite their unparalleled theoretical capacity, lithium-metal anodes suffer from well-known indiscriminate dendrite growth and parasitic surface reactions. Conductive scaffolds with lithium uptake capacity are recently highlighted as promising lithium hosts, and carbon nanotubes (CNTs) are an ideal candidate for this purpose because of their capability of percolating a conductive network. However, CNT networks are prone to rupture easily due to a large tensile stress generated during lithium up