Yonsei University · Engineering
Professor Kyoungsoo Park's research lab specializes in computational mechanics and fracture mechanics, with a focus on advanced numerical methods for modeling complex material behaviors. The lab develops innovative finite element and virtual element methods to simulate dynamic cohesive fracture, including adaptive mesh refinement and enrichment techniques for accurate crack propagation. Key research directions include cohesive zone modeling, fatigue crack growth, and multi-scale microstructure reconstruction using multi-modal imaging. The lab also pioneers integration schemes for handling weak singularities and stability in extended finite element methods.
Figures are computed from collected data and may differ slightly.
One of the fundamental aspects in cohesive zone modeling is the definition of the traction-separation relationship across fracture surfaces, which approximates the nonlinear fracture process. Cohesive traction-separation relationships may be classified as either nonpotential-based models or potential-based models. Potential-based models are of special interest in the present review article. Several potential-based models display limitations, especially for mixed-mode problems, because of the bou
Abstract A mapping method is developed to integrate weak singularities, which result from enrichment functions in the generalized/extended finite element method. The integration scheme is applicable to 2D and 3D problems including arbitrarily shaped triangles and tetrahedra. Implementation of the proposed scheme in existing codes is straightforward. Numerical examples for 2D and 3D problems demonstrate the accuracy and convergence properties of the technique. Copyright © 2008 John Wiley & So
SUMMARY Adaptive mesh refinement and coarsening schemes are proposed for efficient computational simulation of dynamic cohesive fracture. The adaptive mesh refinement consists of a sequence of edge‐split operators, whereas the adaptive mesh coarsening is based on a sequence of vertex‐removal (or edge‐collapse) operators. Nodal perturbation and edge‐swap operators are also employed around the crack tip region to improve crack geometry representation, and cohesive surface elements are adaptively i
Summary We present a general framework to solve elastodynamic problems by means of the virtual element method (VEM) with explicit time integration. In particular, the VEM is extended to analyze nearly incompressible solids using the B‐bar method. We show that, to establish a B‐bar formulation in the VEM setting, one simply needs to modify the stability term to stabilize only the deviatoric part of the stiffness matrix, which requires no additional computational effort. Convergence of the numeric
The concrete microstructure was successfully reconstructed using the complementarity of X-ray and neutron computed tomography (CT). Neither tomogram alone was found to be suitable to properly describe the microstructure of concrete under this study. However, by merging the information revealed by the two modalities, and using image segmentation, noise reduction, and image registration techniques we reconstruct the concrete microstructure. Void, aggregate, and cement paste phases are successfully
Open papers in the app to read, cite, and organize with AI.
