Pilnam Kim

Soft lithography has provided a low-expertise route toward micro/nanofabrication and is playing an important role in microfluidics, ranging from simple channel fabrication to the creation of micropatterns onto a surface or within a microfluidic channel. In this review, the materials, methods, and applications of soft lithography for microfluidics are briefly summarized with a particular emphasis on integrated microfluidic systems containing physical microstructures or a topographically patterned

We present a simple and widely applicable method to fabricate micro- and nanochannels comprised entirely of crosslinked polyethylene glycol (PEG) by using UV-assisted irreversible sealing to bond partially crosslinked PEG surfaces. The method developed here can be used to form channels as small as approximately 50 nm in diameter without using a sophisticated experimental setup. The manufactured channel is a homogeneous conduit made completely from non-biofouling PEG, exhibits robust sealing with

Hyaluronic acid (HA) is found in various tumor tissues, and is considered tumor-associated extracellular matrix (ECM). Within this tumor-associated ECM, stromal cells, especially immune cells, are involved in tumor progression. However, the effects of tumor-associated ECM on the characteristics of immune cells remain unexplored. Therefore, we studied the triggering effect of HA on spontaneous M2-like polarity of monocytes/macrophages using HA-mixed collagen (HA-COL) matrix. In the presence of HA

We demonstrate a recycled ion-flux through heterogeneous nanoporous junctions, which induce stable ion concentration polarization with an electric field. The nanoporous junctions are based on integration of ionic hydrogels whose surfaces are negatively or positively charged for cationic or anionic selectivity, respectively. Such heterogeneous junctions can be matched up in a way to achieve continuous ion-flux operation for stable concentration gradient or ionic conductance. Furthermore, the comb

We present simple soft lithographic methods for patterning supported lipid bilayer (SLB) membranes onto a surface and inside microfluidic channels. Micropatterns of polyethylene glycol (PEG)-based polymers were fabricated on glass substrates by microcontact printing or capillary moulding. The patterned PEG surfaces have shown 97 +/- 0.5% reduction in lipid adsorption onto two dimensional surfaces and 95 +/- 1.2% reduction inside microfluidic channels in comparison to glass control. Atomic force

Highly aligned metal nanowire arrays with feature sizes approaching 10 nm are fabricated. This is made possible by the self-assembly of block copolymers (BCPs) on graphene-wrinkle arrays. Thickness-modulated BCP films confined on the wrinkled reduced graphene oxide (rGO) surface promote the strict alignment of the self-assembled BCP lamellae in the direction of the film thickness gradient.

When embedded into a three-dimensional (3D) matrix, cancer stem cells (or cancer-initiating cells) can grow into self-organizing organotypic structures called tumor organoids. During organoid formation, the matrix not only provides structural support but also delivers biochemical signals. Although increasing evidence indicates that the extracellular matrix (ECM) is an essential component of the tumor microenvironment during tumor development and progression, the influence of the ECM on organoid

A simple, scalable method for one-dimensional alignment of single-walled carbon nanotubes (SWCNTs) inside reversibly bonded nanochannels is reported. Nanochannels are used as a guide for introducing a solution containing SWCNTs. Two nanochannels 50 and 200 nm in width are used. Highly oriented, one-dimensional arrays are generated along the channel direction. Supporting information for this article is available on the WWW under http://www.wiley-vch.de/contents/jc_2296/2008/z700300_s.pdf or from

We examined the formation of a multiply curved meniscus inside rectangular nanochannels, whose width ranges from 50 to 800 nm at a constant height of 200 nm. When the channel width is smaller than approximately 400 nm under partial wetting conditions, a distinct multi-curvature meniscus was observed at the advancing front with an edge disjoined from the wall. In contrast, a typical pre-wetting film was observed at the front regardless of the channel size for complete wetting conditions. Our theo

Cancer cell invasion is the main reason for high mortality in patients with malignant cancers. There has been little improvement in cancer prognosis because of a high rate of infiltration. Therefore, successful treatment requires inhibition of cancer cell invasion. Here, we suggest a new approach to inhibit cancer cell invasion through mild reduction of cell surface proteins to expose free thiols. Through mild reduction, the cancer cell surfaces present free active thiols at the membranes, enhan

We study the electrically driven spreading of dielectric liquid films in wedge-shaped gaps across which a potential difference is applied. Our experiments are in a little-studied regime where, throughout the dynamics, the electrical relaxation time is long compared to the time for charge to be convected by the fluid motion. We observe that at a critical normal electric field the hump-shaped leading edge undergoes an instability in the form of a single Taylor cone and periodic jetting ensues, aft

Abstract Small extracellular vesicles (EVs), including exosomes, in body fluids have important applications in the noninvasive liquid biopsy-based diagnosis of cancer. Current EV-based diagnostic techniques still face practical challenges, such as inefficient EV isolation. Here, we report an efficient, resource-free pre-enrichment approach using (–)-epigallocatechin-3-gallate (EGCG), a polyphenolic biomolecule, to isolate and detect exosomal microRNAs (miRNAs) in human blood plasma samples. Our