Rodney S. Ruoff

Graphene has been attracting great interest because of its distinctive band structure and physical properties. Today, graphene is limited to small sizes because it is produced mostly by exfoliating graphite. We grew large-area graphene films of the order of centimeters on copper substrates by chemical vapor deposition using methane. The films are predominantly single-layer graphene, with a small percentage (less than 5%) of the area having few layers, and are continuous across copper surface ste

Abstract There is intense interest in graphene in fields such as physics, chemistry, and materials science, among others. Interest in graphene's exceptional physical properties, chemical tunability, and potential for applications has generated thousands of publications and an accelerating pace of research, making review of such research timely. Here is an overview of the synthesis, properties, and applications of graphene and related materials (primarily, graphite oxide and its colloidal suspens

Supercapacitors, also called ultracapacitors or electrochemical capacitors, store electrical charge on high-surface-area conducting materials. Their widespread use is limited by their low energy storage density and relatively high effective series resistance. Using chemical activation of exfoliated graphite oxide, we synthesized a porous carbon with a Brunauer-Emmett-Teller surface area of up to 3100 square meters per gram, a high electrical conductivity, and a low oxygen and hydrogen content. T

The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a "nanostressing stage" located within a scanning electron microscope. The tensile-loading experiment was prepared and observed entirely within the microscope and was recorded on video. The MWCNTs broke in the outermost layer ("sword-in-sheath" failure), and the tensile strength of this layer ranged from 11 to 63 gigapascals for the set of 19 MWCNTs that were loaded. Analysis of the stress-strain curves

For the first time, stable aqueous dispersions of polymer-coated graphitic nanoplatelets can be prepared via an exfoliation/in-situ reduction of graphite oxide in the presence of poly(sodium 4-styrenesulfonate).

We present two different ways to fabricate nitrogen-doped graphene (N-graphene) and demonstrate its use as a metal-free catalyst to study the catalytic active center for the oxygen reduction reaction (ORR). N-graphene was produced by annealing of graphene oxide (G-O) under ammonia or by annealing of a N-containing polymer/reduced graphene oxide (RG-O) composite (polyaniline/RG-O or polypyrrole/RG-O). The effects of the N precursors and annealing temperature on the performance of the catalyst wer

Ultracapacitors are rapidly being adopted for a wide range of electrical energy storage applications. While ultracapacitors are able to deliver high rates of charge and discharge, they are limited in the amount of energy stored. The capacity of ultracapacitors is largely determined by the electrode material and as a result research to improve the performance of electrode materials has dramatically increased. While test methods for packaged ultracapacitors are well developed, it is often impracti

The room temperature solubility of pure C60 has been determined in 47 solvents. The solubilities cover a wide range, from 0.01 mg/mL in methanol to 50 mg/mL in 1-chloronaphthalene. The solubilities in CS2, toluene, and hexane, three of the commonly employed solvents, are 7.9,2.8, and 0.04 mg/mL, respectively. An examination of the solubilities of C60 as a function of the solvent properties such as index of refraction, dielectric constant, molecular size, Hildebrand solubility parameter, and H-bo

Abstract In this work, spongy graphene (SG), a shape‐mouldable and nanoporous material with a high specific surface area used as a versatile and recyclable sorbent material, is proposed and studied. SG shows highly efficient absorption of not only petroleum products and fats, but also toxic solvents such as toluene and chloroform (up to 86 times of its own weight), requiring no further pretreatment, which is tens of times higher than that of conventional absorbers. Moreover, SG can be regenerate

Flexisense: Films of graphene oxide and reduced graphene oxide are printed onto a flexible plastic surface (see picture), using inkjet techniques, which are used to detect chemically aggressive vapors such as NO2 and Cl2. Vapors in the 100 ppm–500 ppb concentration range can be detected in an air sample without the aid of a vapor concentrator.