Shoji Takeuchi

Dynamic microarrays hold great promise for advancing research in proteomics, diagnostics and drug discovery. However, this potential has yet to be fully realized due to the lack of reliable multifunctional platforms to transport and immobilize particles, infuse reagents, observe the reaction, and retrieve selected particles. We achieved all these functions in a single integrated device through the combination of hydrodynamic and optical approaches. Hydrodynamic forces allow simultaneous transpor

An axisymmetric flow-focusing microfluidic device (AFFD) is described. The AFFD (see Figure, top) produces micrometer-sized (50–300 μm) polymer-coated droplets (see Figure, bottom) with narrow size distributions (< 5 %). The axisymmetric geometry confines droplets to the central axis of the channel and prevents them from being sheared or damaged at the channel walls. The device is used to prepare aqueous droplets encapsulated in nylon-6,6 membranes by carrying out interfacial polymerization reac

The fluidic channel in the flexible probe has three functions: (i) to inject chemicals into the tissues, (ii) to measure the neural activities from the tissues, and (iii) to improve the mechanical stiffness of the probe by filling the channel with a solid material. A 10-microm-thick microfluidic channel was embedded into the probe by using sacrificial photoresist patterns. Polyethylene glycol (PEG), which is solid at room temperature and dissolves when in contact with water, was used to fill the

The use of fluorescence-based sensors holds great promise for continuous glucose monitoring (CGM) in vivo, allowing wireless transdermal transmission and long-lasting functionality in vivo. The ability to monitor glucose concentrations in vivo over the long term enables the sensors to be implanted and replaced less often, thereby bringing CGM closer to practical implementation. However, the full potential of long-term in vivo glucose monitoring has yet to be realized because current fluorescence

Biohybrid robots are attracting attention as promising candidates to enhance robot applicability to studies on biological designs and in vitro construction of biological dynamic systems. Rapid progress in biohybrid robots with skeletal muscle tissues formed on a flexible substrate has enabled various types of locomotion powered by muscle tissue. However, it has been difficult to achieve high levels of both large and long-term actuations of the skeletal muscle tissues because of their spontaneous

Fluorescent microbeads hold great promise for in vivo continuous glucose monitoring with wireless transdermal transmission and long-lasting activity. The full potential of fluorescent microbeads has yet to be realized due to insufficient intensity for transdermal transmission and material toxicity. This paper illustrates the highly-sensitive, biostable, long-lasting, and injectable fluorescent microbeads for in vivo continuous glucose monitoring. We synthesized a fluorescent monomer composed of

This paper describes a method of generating three-dimensional (3D) cell-laden microstructures by applying the principle of origami folding technique and cell traction force (CTF). We harness the CTF as a biological driving force to fold the microstructures. Cells stretch and adhere across multiple microplates. Upon detaching the microplates from a substrate, CTF causes the plates to lift and fold according to a prescribed pattern. This self-folding technique using cells is highly biocompatible a

Controlled synthesis of micro multi-compartmental particles using a centrifuge droplet shooting device (CDSD) is reported. Sodium alginate solutions introduced in a multi-barreled capillary form droplets at the capillary orifice under ultrahigh gravity and gelify in a CaCl(2) solution. The size, shape, and compartmentalization of the particles are controlled. Co-encapsulation of Jurkat cells and magnetic colloids into Janus particles is demonstrated. The Janus particles present sensitive reactio

A 3D flexible multichannel microprobe array was designed, fabricated and tested. Since each probe had several recording pads, the probe array could be used to measure neural activity at various depths in the brain. They were batch fabricated with interconnections, using a specific folding process to fold the planar probe structures. This flexible probe array was inserted into a rat's brain without fracturing and was successfully used to measure neural signals.

This paper describes a technique for growing filamentous cells of Escherichia coli with defined shapes, including crescents, zigzags, sinusoids, and spirals. The procedure begins with the fabrication of embossed microchambers in agarose. Cells are trapped in the chambers by placing a flat, flexible "ceiling", either a slab of agarose or poly(dimethylsiloxane), against an agarose mold on which a suspension of cells has been added; the use of agarose keeps cells hydrated and allows nutrients to di

This paper describes a highly sensitive and selective chemical sensor using living cells (Xenopus laevis oocytes) within a portable fluidic device. We constructed an odorant sensor whose sensitivity is a few parts per billion in solution and can simultaneously distinguish different types of chemicals that have only a slight difference in double bond isomerism or functional group such as -OH, -CHO and -C(=O)-. We developed a semiautomatic method to install cells to the fluidic device and achieved