Woo Jong Yu

Abstract Memristors such as phase‐change memory and resistive memory have been proposed to emulate the synaptic activities in neuromorphic systems. However, the low reliability of these types of memories is their biggest challenge for commercialization. Here, a highly reliable memristor array using floating‐gate memory operated by two terminals (source and drain) using van der Waals layered materials is demonstrated. Centimeter‐scale samples (1.5 cm × 1.5 cm) of MoS 2 as a channel and graphene a

Two-dimensional layered transition-metal dichalcogenides have attracted considerable interest for their unique layer-number-dependent properties. In particular, vertical integration of these two-dimensional crystals to form van der Waals heterostructures can open up a new dimension for the design of functional electronic and optoelectronic devices. Here we report the layer-number-dependent photocurrent generation in graphene/MoS₂/graphene heterostructures by creating a device with two

The bilayer graphene has attracted considerable attention for potential applications in future electronics and optoelectronics because of the feasibility to tune its band gap with a vertical displacement field to break the inversion symmetry. Surface chemical doping in bilayer graphene can induce an additional offset voltage to fundamentally affect the vertical displacement field and the band gap opening in bilayer graphene. In this study, we investigate the effect of chemical molecular doping o

We report small hysteresis integrated circuits by introducing monolayer graphene for the electrodes and a single-walled carbon nanotube network for the channel. Small hysteresis of the device originates from a defect-free graphene surface, where hysteresis was modulated by oxidation. This uniquely combined nanocarbon material device with transparent and flexible properties shows remarkable device performance; subthreshold voltage of 220 mV decade(-1), operation voltage of less than 5 V, on/off r

Ultra-transparent and flexible non-volatile memory devices fabricated using oxygen-decorated graphene electrodes and carbon nanotube network channels are reported. The fabricated memory device revealed a high transmittance of 83.8% with respect to air (PET transmittance: 87.4%) and excellent mechanical stability in a 1000 times bending test. The ultra transparency was realized by introducing oxygen trap sites onto the graphene surface instead of using an opaque inorganic floating gate layer. Det

A CMOS-like inverter was integrated by using ambipolar carbon nanotube (CNT) transistors without doping. The ambipolar CNT transistors automatically configure themselves to play a role as an n-type or p-type transistor in a logic circuit depending on the supply voltage (V(DD)) and ground. A NOR (NAND) gate is adaptively converted to a NAND (NOR) gate. This adaptiveness of logic gates exhibiting two logic gate functions in a single logic circuit offers a new opportunity for designing logic circui

Vertically stacked two-dimensional van der Waals (vdW) heterostructures, used to obtain homogeneity and band steepness at interfaces, exhibit promising performance for band-to-band tunneling (BTBT) devices. Esaki tunnel diodes based on vdW heterostructures, however, yield poor current density and peak-to-valley ratio, inferior to those of three-dimensional materials. Here, we report the negative differential resistance (NDR) behavior in a WSe₂/SnSe₂ heterostructure system a

Piezoelectricity of transition metal dichalcogenides (TMDs) under mechanical strain has been theoretically and experimentally studied. Powerful strain sensors using Schottky barrier variation in TMD/metal junctions as a result of the strain-induced lattice distortion and associated ion-charge polarization were demonstrated. However, the nearly fixed work function of metal electrodes limits the variation range of a Schottky barrier. We demonstrate a highly sensitive strain sensor using a variable

Vertical integration of 2D layered materials to form van der Waals heterostructures (vdWHs) offers new functional electronic and optoelectronic devices. However, the mobility in vertical carrier transport in vdWHs of vertical field-effect transistor (VFET) is not yet investigated in spite of the importance of mobility for the successful application of VFETs in integrated circuits. Here, the mobility in VFET of vdWHs under different drain biases, gate biases, and metal work functions is first inv

Two-dimensional (2D) layered materials with properties such as a large surface-to-volume ratio, strong light interaction, and transparency are expected to be used in future optoelectronic applications. Many studies have focused on ways to increase absorption of 2D-layered materials for use in photodetectors. In this work, we demonstrate another strategy for improving photodetector performance using a graphene/MoS₂ heterojunction phototransistor with a short channel length and a tunabl

The lack of a bandgap makes bulk graphene unsuitable for room temperature transistors with a sufficient on/off current ratio. Lateral constriction of charge carriers in graphene nanostructures or vertical inversion symmetry breaking in bilayer graphene are two potential strategies to mitigate this challenge, but each alone is insufficient to consistently achieve a large enough on/off ratio (e.g. > 1000) for typical logic applications. Herein we report the combination of lateral carrier constrict

Graphene is one of the most promising materials for photodetectors due to its ability to convert photons into hot carriers within approximately 50 fs and generate long-lived thermalized states with lifetimes longer than 1 ps. In this study, we demonstrate a wide range of vertical photodetectors having a graphene/h-BN/Au heterostructure in which an hexagonal boron nitride (h-BN) insulating layer is inserted between an Au electrode and graphene photoabsorber. The photocarriers effectively tunnel t

In this study, selective Nb doping (<i>P</i>-type) at the WS₂ layer in a WS₂-MoS₂ lateral heterostructure <i>via</i> a chemical vapor deposition (CVD) method using a solution-phase precursor containing W, Mo, and Nb atoms is proposed. The different chemical activity reactivity (MoO₃ > WO₃ > Nb₂O₅) enable the separation of the growth temperature of intrinsic MoS₂ to 700 °C (first grown inner layer) and Nb-dope