Skip to main content

In Suk Kang

Pohang University of Science and Technology · Engineering

About the Lab

Professor In Suk Kang's research lab specializes in fluid dynamics, microfluidics, and soft matter physics, with a focus on droplet and bubble dynamics, electrowetting phenomena, and complex coacervation in colloidal systems. The lab investigates fundamental mechanisms governing droplet spreading, deformation, and breakup under electric fields and external flows, integrating experimental, theoretical, and numerical approaches. Key research directions include digital microfluidics for lab-on-a-chip applications, interfacial phenomena in polyelectrolyte systems, and the manipulation of microdroplets and nanoparticles via electric fields. The lab also explores the role of ion-specific effects (Hofmeister series) in controlling phase behavior and interfacial tension in complex coacervates.

microfluidicselectrowettingdroplet dynamicscomplex coacervationinterfacial tension

Research Overview

Papers
196
Total Citations
3,617
Papers (5y)
15
Primary Field
Engineering

Research Output Trend

Figures are computed from collected data and may differ slightly.

Publications per year (5y)
15total
2021
2022
2023
2024
2026
Citations per year (5y)
113total
20212022202320242026

Selected Papers

15
1
Article|92 citations·2008
Electrical charging of a conducting water droplet in a dielectric fluid on the electrode surface
Yong-Mi Jung, Hyun-Chang Oh, In Seok Kang
SJR Q1Journal of Colloid and Interface Science
Electrical and Electronic EngineeringEngineering
2
Article|89 citations·1982
The effect of turbulence promoters on mass transfer—numerical analysis and flow visualization
In Seok Kang, Ho Nam Chang
SJR Q1International Journal of Heat and Mass Transfer
Computational MechanicsEngineering
3
Article|78 citations·1988
The drag coefficient for a spherical bubble in a uniform streaming flow
In Seok Kang, L. Gary Leal
The Physics of Fluids

The drag coefficient CD=48/R for a spherical bubble in a uniform streaming flow at high Reynolds number, which was first obtained via a dissipation method by Levich [Zh. Eksp. Teor. Fiz. 19, 18 (1949)], is rederived here by direct integration of the normal stress over the bubble surface. The present study also shows that the drag coefficient up to O(R−1) depends only on the O(1) vorticity distribution right on the bubble surface, and is independent of the vorticity distribution in the fluid. The

Materials ChemistryMaterials Science
4
Article|76 citations·2007
A numerical investigation on AC electrowetting of a droplet
Jin Seok Hong, Sung Hee Ko, Kwan Hyoung Kang, In Seok Kang
SJR Q2Microfluidics and Nanofluidics
Electrical and Electronic EngineeringEngineering
5
Article|76 citations·1987
Numerical solution of axisymmetric, unsteady free-boundary problems at finite Reynolds number. I. Finite-difference scheme and its application to the deformation of a bubble in a uniaxial straining flow
In Seok Kang, L. Gary Leal
The Physics of Fluids

A brief description of a numerical technique suitable for solving axisymmetric, unsteady free-boundary problems in fluid mechanics is presented. The technique is based on a finite-difference solution of the equations of motion on a moving orthogonal curvilinear coordinate system, which is constructed numerically and adjusted to fit the boundary shape at any time. The initial value problem is solved using a fully implicit first-order backward time differencing scheme in order to insure numerical

Fluid Flow and Transfer ProcessesChemical Engineering
6
Article|74 citations·2013
Effects of Drop Size and Viscosity on Spreading Dynamics in DC Electrowetting
Jiwoo Hong, Young Kwon Kim, Kwan Hyoung Kang, Jung Min Oh, In Seok Kang
SJR Q1Langmuir

This study investigates the effects of drop size and viscosity on spreading dynamics, including response time, maximum velocity, and spreading pattern transition, in response to various DC voltages, based on both experiment and theoretical modeling. It is experimentally found that both switching time (i.e., time to reach maximum wetted radius) and settling time (i.e., time to reach equilibrium radius) are proportional to 1.5th power of the effective base radius. It is also found that the maximum

Electrical and Electronic EngineeringEngineering
7
Article|57 citations·1990
Bubble dynamics in time-periodic straining flows
In Seok Kang, L. Gary Leal
SJR Q1Journal of Fluid Mechanics

The dynamics and breakup of a bubble in an axisymmetric, time-periodic straining flow has been investigated via analysis of an approximate dynamic model and also by time-dependent numerical solutions of the full fluid mechanics problem. The analyses reveal that in the neighbourhood of a stable steady solution, an $O(\epsilon^{\frac{1}{3}})$ time-dependent change of bubble shape can be obtained from an O (ε) resonant forcing. Furthermore, the probability of bubble breakup at subcritical Weber num

Electrical and Electronic EngineeringEngineering
8
Article|51 citations·2014
Interfacial Tension of Complex Coacervated Mussel Adhesive Protein According to the Hofmeister Series
Seonghye Lim, Dustin Moon, Hyo Jeong Kim, Jeong Hyun Seo, In Seok Kang, Hyung Joon
SJR Q1Langmuir

Complex coacervation is a liquid-liquid phase separation in a colloidal system of two oppositely charged polyelectrolytes or colloids. The interfacial tension of the coacervate phase is the key parameter for micelle formation and interactions with the encapsulating material. However, the relationship between interfacial tensions and various salt solutions is poorly understood in complex coacervation. In the present work, the complex coacervate dynamics of recombinant mussel adhesive protein (MAP

Surfaces, Coatings and FilmsMaterials Science
9
Article|51 citations·2013
Digital Electrophoresis of Charged Droplets
Do Jin Im, Byeong Sun Yoo, Myung Mo Ahn, Dustin Moon, In Seok Kang
SJR Q1Analytical Chemistry

A digital microfluidic system based on a direct electric charging and subsequent electrophoretic manipulation of droplets is made by simple fabrication at low cost. Digitally controlled two-dimensional droplet motions are realized by digital polarity control of an array of electrodes. By independent control of droplets and colorimetric detection, the coalescence and mixing of droplets is analyzed quantitatively. The gelation of sodium alginate and the crystallization of calcium carbonate by mult

Electrical and Electronic EngineeringEngineering
10
Article|43 citations·1999
Chaotic mixing and mass transfer enhancement bypulsatile laminar flow in an axisymmetric wavy channel
Byoungwoo Lee, In Seok Kang, Hyunkyung Lim
SJR Q1International Journal of Heat and Mass Transfer
Computational MechanicsEngineering
11
Article|38 citations·2007
Deformation and motion of a charged conducting drop in a dielectric liquid under a nonuniform electric field
Jung Gi Kim, Do Jin Im, Yong-Mi Jung, In Seok Kang
SJR Q1Journal of Colloid and Interface Science
Electrical and Electronic EngineeringEngineering
12
Article|32 citations·2006
Drop formation via breakup of a liquid bridge in an AC electric field
Beom Seok Lee, Hye-Jung Cho, Jeong‐Gun Lee, Nam Huh, Jeong‐Woo Choi, In Seok Kang
SJR Q1Journal of Colloid and Interface Science
Electrical and Electronic EngineeringEngineering
13
Article|32 citations·1988
Small-amplitude perturbations of shape for a nearly spherical bubble in an inviscid straining flow (steady shapes and oscillatory motion)
In Seok Kang, L. Gary Leal
SJR Q1Journal of Fluid Mechanics

The method of domain perturbations is used to study the problem of a nearly spherical bubble in an inviscid, axisymmetric straining flow. Steady-state shapes and axisymmetric oscillatory motions are considered. The steady-state solutions suggest the existence of a limit point at a critical Weber number, beyond which no solution exists on the steady-state solution branch which includes the spherical equilibrium state in the absence of flow (e.g. the critical value of 1.73 is estimated from the th

Computational MechanicsEngineering
14
Article|25 citations·1992
Orthogonal grid generation in a 2D domain via the boundary integral technique
In Seok Kang, L. Gary Leal
SJR Q1Journal of Computational Physics
Mechanics of MaterialsEngineering
15
Article|24 citations·1989
Numerical solution of axisymmetric, unsteady free-boundary problems at finite Reynolds number. II. Deformation of a bubble in a biaxial straining flow
In Seok Kang, L. Gary Leal
Physics of Fluids A Fluid Dynamics

Numerical solutions of the full Navier–Stokes equations are used to investigate the steady and unsteady deformation of a bubble in a biaxial straining flow for Reynolds numbers in the range 0≤R≤400, and Weber numbers up to O(10). The steady-state bubble shape and the frequency of small amplitude oscillations of shape are both identical for biaxial and uniaxial straining flows in the potential flow limit. However, for a large, but finite Reynolds number, the bubble shape in the biaxial straining

Biomedical EngineeringEngineering

Research Areas

Electrical and Electronic EngineeringBiomedical EngineeringComputational MechanicsMaterials ChemistryMechanical EngineeringComputer Networks and Communications

Dive deeper into In Suk Kang's research on Nubint

Open this lab's papers in the app to read with AI, summarize, and cite in your writing.