Kim Dong-soo
Kyung Hee University · Medicine
About the Lab
Professor Kim Dong-soo's research lab specializes in advanced functional materials and biosensors, with a focus on developing novel nanomaterials for environmental and biomedical sensing applications. The lab investigates smart sensor systems for detecting gases like acetone and humidity using eco-friendly and printable nanocomposites, such as cellulose nanofibers and metal nanoparticles. Additionally, the lab contributes to clinical and translational research, particularly in urological infections and surgical outcomes, integrating microbiome analysis with clinical data. The interdisciplinary approach bridges materials science, nanotechnology, and biomedicine to address real-world health and environmental challenges.
Research Overview
Research Output Trend
Figures are computed from collected data and may differ slightly.
Selected Papers
15Urinary tract infection is one of the most common bacterial infections and can cause major burdens, not only to individuals but also to an entire society. Current knowledge of the microbial communities in the urinary tract has increased exponentially due to next-generation sequencing and expanded quantitative urine culture. We now acknowledge a dynamic urinary tract microbiome that we once thought was sterile. Taxonomic studies have identified the normal core microbiota of the urinary tract, and
ABSTRACT: We aimed to evaluate the risk factors of febrile urinary tract infection (UTI) following retrograde intrarenal surgery (RIRS) for treating renal stones.We retrospectively reviewed the data of patients with 10 - 30 mm kidney stones who underwent RIRS from January 2014 to July 2017. Evaluation included age, gender, body mass index, stone size, stone location, and operative time. All surgeries were performed by a single surgeon and ureteral stenting was not done prior surgery. The risk fa
In this study, pure ZnO and Al-doped ZnO(AZO) thin films were coated onto a SiO2 wafer using the electrostatic spray deposition (ESD) process for acetone gas detection under laboratory conditions. Voltage levels were varied to determine the optimal conditions for producing thin films with the highest uniformity. The results indicate that the optimal coating voltage for achieving the highest uniformity of the coated films is 2.9 kV for ZnO and 2.6 kV for AZO. The thin films were produced under th
This paper reports a high-performance humidity sensor made using a novel cellulose nanofiber (CNF)-silver nanoparticle (AgNP) sensing material. The interdigital electrode pattern was printed via reverse-offset printing using Ag nano-ink, and the sensing layer on the printed interdigitated electrode (IDE) was formed by depositing the CNF-AgNP composite via inkjet printing. The structure and morphology of the CNF-AgNP layer are characterized using ultraviolet-visible spectroscopy, an X-ray diffrac
Adrenal myelolipomas are generally asymptomatic and can be treated conservatively. However, rupture and hemorrhage of the tumor can cause symptoms requiring surgical removal.
Sexual maturity and growth characteristics of Octopus minor were investigated in 796 individuals from mud flats in Goorori, Muan-Goon, Korea. Gonadosomatic index (GSI) peaked between June and July in females and between November and January in males. The discrepancy in the index peaks between females and males might result from the earlier sexual maturation of males. The sex ratio was biased toward females (68%) in April and toward males (78%) in September, although the differences were not sign
Long indwelling stents can cause dire complications requiring radical interventions. Stent registry systems, novel stent material development, and proper patient education is important for complication prevention.
The insulin-like growth factor (IGF) is found in all vertebrates and its type-II molecule is regarded as a fundamental embryonic growth factor during development. We have firstly identified, in this study, a cDNA clone corresponding to IGF-II (flIGF-II) from the adult brain of the teleost, Paralichthys olivaceus. We also examined the tissue expression of flIGF-II in several adult tissues by RT-PCR. The fllGF-II cDNA contained a complete ORF consisting of 215 amino acids and one stop codon. Its m
Traditional printed electronics processes have recently been utilized within 3D-printed structures where components and interconnects are introduced during manufacturing disruptions. The dielectric performance of 3D-printed materials has a low-resolution problem, and many technologies have been proposed for direct printing on a 3D curved surface or structure. This paper reports a humidity sensor fabricated with a 3D-printed electrode and cellulose nanofibers on a curved surface. The electrode pa
Peyronie's disease is an acquired condition characterized by penile deformities caused by fibrosis of the penile tunica albuginea, leading to symptoms such as penile pain, erectile dysfunction, and other associated issues. Despite extensive research, the pathophysiology of this condition remains poorly understood, and standardized diagnostic and treatment protocols are lacking. While clinical guidelines from several professional societies exist, they do not consistently account for factors such
The performance, stability, and lifespan of lithium-ion batteries are influenced by variations in the flow of lithium ions with temperature. In electric vehicles, coolants are generally used to maintain the optimal temperature of the battery, leading to an increasing demand for temperature and humidity sensors that can prevent leakage and short circuits. In this study, humidity and temperature sensors were fabricated on a pouch film of a pouch-type battery. IDE electrodes were screen-printed on
Research Areas
Dive deeper into Kim Dong-soo's research on Nubint
Open this lab's papers in the app to read with AI, summarize, and cite in your writing.