Pilnam Kim

Soft lithography has provided a low-expertise route toward micro/nanofabrication and is playing an important role in microfluidics, ranging from simple channel fabrication to the creation of micropatterns onto a surface or within a microfluidic channel. In this review, the materials, methods, and applications of soft lithography for microfluidics are briefly summarized with a particular emphasis on integrated microfluidic systems containing physical microstructures or a topographically patterned

Glioblastoma multiforme (GBM) is the most common brain tumor with very aggressive and infiltrative. Extracellular matrix (ECM) plays pivotal roles in the infiltrative characteristics of GBM. To understand the invasive characteristic of GBM, it is necessary to study cell-ECM interaction in the physiologically relevant biomimetic model that recapitulates the GBM-specific ECM microenvironment. Here, we propose biomimetic GBM-specific ECM microenvironment for studying mode and dynamics of glioblasto

We present a simple and widely applicable method to fabricate micro- and nanochannels comprised entirely of crosslinked polyethylene glycol (PEG) by using UV-assisted irreversible sealing to bond partially crosslinked PEG surfaces. The method developed here can be used to form channels as small as approximately 50 nm in diameter without using a sophisticated experimental setup. The manufactured channel is a homogeneous conduit made completely from non-biofouling PEG, exhibits robust sealing with

We demonstrate a recycled ion-flux through heterogeneous nanoporous junctions, which induce stable ion concentration polarization with an electric field. The nanoporous junctions are based on integration of ionic hydrogels whose surfaces are negatively or positively charged for cationic or anionic selectivity, respectively. Such heterogeneous junctions can be matched up in a way to achieve continuous ion-flux operation for stable concentration gradient or ionic conductance. Furthermore, the comb

The high mortality in glioblastoma multiforme (GBM) patients is primarily caused by extensive infiltration into adjacent tissue and subsequent rapid recurrence. There are no clear therapeutic strategies that target the infiltrative subpopulation of GBM mass. Using mesenchymal mode of invasion, the GBM is known to widely infiltrate by interacting with various unique components within brain microenvironment such as hyaluronic acid (HA)-rich matrix and white matter tracts. However, it is unclear ho

BACKGROUND: Mesenchymal stemlike cells (MSLCs) have been detected in many types of cancer including brain tumors and have received attention as stromal cells in the tumor microenvironment. However, the cellular mechanisms underlying their participation in cancer progression remain largely unexplored. The aim of this study was to determine whether MSLCs have a tumorigenic role in brain tumors. METHODS: To figure out molecular and cellular mechanisms in glioma invasion, we have cultured glioma wit

We present simple soft lithographic methods for patterning supported lipid bilayer (SLB) membranes onto a surface and inside microfluidic channels. Micropatterns of polyethylene glycol (PEG)-based polymers were fabricated on glass substrates by microcontact printing or capillary moulding. The patterned PEG surfaces have shown 97 +/- 0.5% reduction in lipid adsorption onto two dimensional surfaces and 95 +/- 1.2% reduction inside microfluidic channels in comparison to glass control. Atomic force

BACKGROUND: Human mesenchymal stem cells (hMSCs) are, due to their pluripotency, useful sources of cells for stem cell therapy and tissue regeneration. The phenotypes of hMSCs are strongly influenced by their microenvironment, in particular the extracellular matrix (ECM), the composition and structure of which are important in regulating stem cell fate. In reciprocal manner, the properties of ECM are remodeled by the hMSCs, but the mechanism involved in ECM remodeling by hMSCs under topographica

Highly aligned metal nanowire arrays with feature sizes approaching 10 nm are fabricated. This is made possible by the self-assembly of block copolymers (BCPs) on graphene-wrinkle arrays. Thickness-modulated BCP films confined on the wrinkled reduced graphene oxide (rGO) surface promote the strict alignment of the self-assembled BCP lamellae in the direction of the film thickness gradient. As a service to our authors and readers, this journal provides supporting information supplied by the autho

A simple, scalable method for one-dimensional alignment of single-walled carbon nanotubes (SWCNTs) inside reversibly bonded nanochannels is reported. Nanochannels are used as a guide for introducing a solution containing SWCNTs. Two nanochannels 50 and 200 nm in width are used. Highly oriented, one-dimensional arrays are generated along the channel direction.

We examined the formation of a multiply curved meniscus inside rectangular nanochannels, whose width ranges from 50 to 800 nm at a constant height of 200 nm. When the channel width is smaller than approximately 400 nm under partial wetting conditions, a distinct multi-curvature meniscus was observed at the advancing front with an edge disjoined from the wall. In contrast, a typical pre-wetting film was observed at the front regardless of the channel size for complete wetting conditions. Our theo

We study the electrically driven spreading of dielectric liquid films in wedge-shaped gaps across which a potential difference is applied. Our experiments are in a little-studied regime where, throughout the dynamics, the electrical relaxation time is long compared to the time for charge to be convected by the fluid motion. We observe that at a critical normal electric field the hump-shaped leading edge undergoes an instability in the form of a single Taylor cone and periodic jetting ensues, aft