Geunbae Lim

during pressure-driven separations, which is a very promising feature for actual applications such as the large-scale treatment of industrial oily wastewater.

Optical resolution photoacoustic microscopy (OR-PAM) is a non-invasive, label-free method of in vivo imaging with microscopic resolution and high optical contrast. Based on intrinsic contrasts, OR-PAM has expanded to include in vivo vessel imaging, flow cytometry, physiological parameter analysis, and single-cell characterization. However, since conventional OR-PAM systems have a fixed tabletop configuration, a large system size, and slow imaging speed, their use in preclinical and clinical stud

Brain‒machine interface (BMI) is a promising technology that looks set to contribute to the development of artificial limbs and new input devices by integrating various recent technological advances, including neural electrodes, wireless communication, signal analysis, and robot control. Neural electrodes are a key technological component of BMI, as they can record the rapid and numerous signals emitted by neurons. To receive stable, consistent, and accurate signals, electrodes are designed in a

Here, we report an omni-purpose stretchable strain sensor (OPSS sensor) based on a nanocracking structure for monitoring whole-body motions including both joint-level and skin-level motions. By controlling and optimizing the nanocracking structure, inspired by the spider sensory system, the OPSS sensor is endowed with both high sensitivity (gauge factor ≈ 30) and a wide working range (strain up to 150%) under great linearity ( R 2 = 0.9814) and fast response time (<30 ms). Furthermore, the fabri

Abstract The fabrication of a stable, anti‐wetting surface is a very challenging issue in surface chemistry. In general, superhydrophobicity highly depends on the surface structure. Moreover, mechanical deformation of the surface structure can produce dramatic changes in the surface wetting state, and in some cases, may even result in a complete loss of the surface's unique wettability. However, the study of stable surfaces under mechanical deformation conditions has been limited to flexible sur

Recently, tremendous engineering applications utilizing new physics of nanoscale electrokinetics have been reported and their basic fundamentals are actively researched. In this work, we first report a simple and economic but reliable nanochannel fabrication technique, leading to a heterogeneously charged triangular nanochannel. The nanochannel utilized the elasticity of PDMS when it bonded with a micrometer-scale structure on a substrate. Second, we successfully demonstrated novel ionic transpo

Stable superhydrophobic meshes with a biomimetic hierarchical structure were fabricated via simple electropolymerization and chemical polymerization processes. Because the multi-scale hierarchical structure provides a stable superhydrophobic state by maintaining a Cassie state, these meshes have high static and dynamic waterproof capabilities.

Aptamer functionalized addressable SWNT-film arrays between cantilever electrodes were successfully developed for biosensor applications. Dielectrophoretically aligned SWNT suspended films made possible highly specific and rapid detection of target proteins with a large binding surface area. Thrombin aptamer immobilized SWNT-film FET biosensor resulted in a real-time, label-free, and electrical detection of thrombin molecules down to a concentration of ca. 7 pM with a step-wise rapid response ti

Nanostructured superhydrophobic silicon surfaces with tunable reflectance are fabricated via a simple maskless deep reactive-ion etching process. By controlling the scale of the high-aspect-ratio nanostructures on a wafer-scale surface, surface reflectance is maximized or minimized over the UV-vis-IR range while maintaining superhydrophobic properties.

Many industries have a significant but largely unmet need for efficient and high-flux emulsion separation, particularly for nanoemulsions. Conventional separation membranes rely on size-based separation mainly utilizing a sieving mechanism plus a wetting phenomenon, resulting in a dramatic trade-off between separation efficiency and separation flux. Herein we address this challenge by adapting electrokinetics to membrane-based separation, using a charge-based mechanism capable of separating even

This report describes a simple method for the direct patterning of nanofibers on a flexible, insulating film. The method allows the replication of nanofibrous patterns from a single patterned electrode and the fabrication of multilayered patterns from various electrode shapes. The architecture of the fibrous patterns can be controlled by tailoring the ambient humidity, thickness of the insulating film, polarity of the electrode, and size of the patterned electrode. Using this novel technique, it