Jihun Jeong

Abstract As interest in triboelectric nanogenerators (TENGs) continues to increase, some studies have reported that certain limitations exist in TENG due to high potential difference, resulting in air breakdown and field emission. In addition, with known limitations such as extremely low voltage at low external resistance, a breakthrough is required to overcome the limitations of TENG. Here, a new TENG mechanism is reported, utilizing ion‐enhanced field emission (IEFE). Using a simple IEFE‐induc

Piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs) are representative technologies that can harvest mechanical energy. In general, piezoelectric/triboelectric hybrid generators can harvest considerable energy with a limited input; however, PENGs and TENGs entail different requirements for harvesting energy. Specifically, PENGs produce a large output when a large mechanical strain is applied, and TENGs require a large surface area to produce a high power. Therefore, it

Abstract Currently, wind energy harvesting is in the limelight. However, with the existing electromagnetic wind generators, it is difficult to harvest multifariously‐wasted breezes. To harvest energy from winds at a wide range of speeds, wind‐driven triboelectric nanogenerators (TENGs) are studied. However, a critical limitation of general wind‐driven TENGs is that their power output is low. Therefore, an innovative strategy is necessary to generate high output power even from breeze. Herein, an

We demonstrate a cylindrical water triboelectric nanogenerator (CW-TENG) that generates sustainable electrical output. The inner surface of the cylinder was patterned into superhydrophobic and hydrophilic parts to control water flow inside the packaged design of CW-TENG. Here, various thicknesses and roughnesses of the superhydrophobic surface, generated using aluminum oxide nanostructures for enhanced electrostatic induction, were measured to obtain the maximum output and superhydrophobicity. A

The triboelectric nanogenerator (TENG) is a recent mechanical energy harvesting technology that has been attracting significant attention. Its working principle involves the combination of triboelectrification and electrostatic induction. The TENG can harvest electrical energy from both solid–solid and liquid–solid contact TENGs. Due to their physical difference, triboelectric materials in the solid–solid TENG need to have high mechanical properties and the surface of the liquid–solid contact TE

Energy harvesting is a method of converting energy from ambient environment into useful electrical energy. Due to the increasing number of sensors and personal electronics, energy harvesting technologies from various sources are gaining attention. Among energy-harvesting technologies, triboelectric nanogenerator (TENG) was introduced as a device that can effectively generate electricity from mechanical motions by contact-electrification. Particularly, liquid-solid contact TENGs, which use the li

Abstract With the rise of portable and wearable electronics, a fast‐charging, long‐lasting power solution is needed; thus, there are attempts to harvest energy from the ambient environment. Mechanical energy harvesting through piezoelectric and triboelectric nanogenerators (PENG and TENG) is a promising approach due to their light weight, low cost, and high‐power density in comparison to other technologies. Both types of generators are capable of charging portable and smart devices on their own

Abstract The electrical power of triboelectric nanogenerators (TENGs) is increased by surface modifications, and they can successfully power portable devices alone. However, modifying the material and its surface may limit the device lifetime, and most of the portable applications demonstrated in previous studies have excessive input conditions. In this study, a capacitor‐integrated TENG (CI‐TENG) that uses the fundamental mechanisms of the Leyden jar is developed. In this device, a long sheet m