Jung-Sun Won

Abstract. A new Sentinel-1 image-based sea ice classification algorithm using a machine-learning-based model trained in a semi-automated manner is proposed to support daily ice charting. Previous studies mostly rely on manual work in selecting training and validation data. We show that the readily available ice charts from the operational ice services can reduce the amount of manual work in preparation of large amounts of training/testing data. Furthermore, they can feed highly reliable data to

Coal mine subsidence hazard can be effectively evaluated by geographic information system (GIS) analysis if sufficient data is provided. It is, however, difficult to obtain ground-based data, especially in remote and less populated mining areas. In this study, we construct and validate a coal mine subsidence hazard map in Taebaek, Korea, by integration of space-borne L-band synthetic aperture radar (SAR) measurements and a fuzzy-based subsidence model. There is an approximately 15-year time inte

This study presents the retrieval of rice paddy height using single polarization (single-pol) interferometric SAR (InSAR) data by means of model-based height inversion without an external DEM. A total of eight TanDEM-X (TDX) scenes were used and the TDX images were; acquired using a large cross-track baseline configuration during the TDX Science Phase (June–August 2015). A single-pol inversion approach for a flooded rice field is proposed and evaluated over the Buan test site in South Korea. A n

Continuously accumulating information on vessels and their activities in coastal areas of interest is important for maintaining sustainable fisheries resources and coastal ecosystems. The speed, heading, sizes, and activities of vessels in certain seasons and at certain times of day are useful information for sustainable coastal management. This paper presents a two-dimensional vessel velocity estimation method using the KOMPSAT-5 (K5) X-band synthetic aperture radar (SAR) system and Doppler par

Qualified ground control points (GCPs) are crucial in the geolocation of a remotely sensed image. If a region has no published map, the geographical coordinates of GCPs must be obtained indirectly. Although these can be re‐constructed from a synthetic aperture radar (SAR) image using sensor position and velocity, this conventional method does not provide accurate GCPs owing to the variable elevations of actual topography. We propose an inverse geolocation method for GCPs by SAR simulation. This

Abstract — It is essential to construct a high precision digital elevation model (DEM) annually or seasonally in tidal flats to monitor coastal erosion. To monitor active coastal changes using the tidal flat DEM, a vertical accuracy of higher than 20 cm is required. We apply space-borne radar interferometry (InSAR) to the Korean tidal flats to test the feasibility of InSAR in tidal flats. We also investigate favorable conditions for the data acquisition of interferometric pair. We first carried

Since Seasat SAR mission in 1978, SAR has become one of the most important surface imaging tools in satellite remote sensing SAR achieves high resolution by signal processing synthesizing a larger aperture. Therefore, SAR signal processing along with antenna technology has been centered upon SAR technologies. Thus interpreters of SAR imagery as well as those who involved in signal processing require the knowledge of the principal SAR processing algorithm. Although the conventional range-Doppler