Abd. Rashid bin Mohd Yusoff 교수

Perovskite solar cells have recently exhibited a significant leap in efficiency due to their broad absorption, high optical absorption coefficient, very low exciton binding energy, long carrier diffusion lengths, efficient charge collection, and very high open-circuit potential, similar to that of III-IV semiconductors. Unlike silicon solar cells, perovskite solar cells can be developed from a variety of low-temperature solutions processed from inexpensive raw materials. When the perovskite abso

We propose that 1 + 1 + 1 triple-junction solar cells can provide an increased efficiency, as well as a higher open circuit voltage, compared to tandem solar cells.

Recent advances on passivation and morphology engineering approaches adopted to obtain high efficiency and stability in perovskite solar cells are thoroughly reviewed.

Abstract Textile electronics embedded in clothing represent an exciting new frontier for modern healthcare and communication systems. Fundamental to the development of these textile electronics is the development of the fibers forming the cloths into electronic devices. An electronic fiber must undergo diverse scrutiny for its selection for a multifunctional textile, viz., from the material selection to the device architecture, from the wearability to mechanical stresses, and from the environmen

Abstract Perovskite solar cells have been heralded as one of the most promising emerging technologies in 2016 because of the very high power conversion efficiency of 22% and the low cost of generating electricity compared to even fossil fuels. These are formed with various dimensionalities and can be fully manipulated once their bulk structure is reduced to a low‐dimensional structure. Despite being one of the most attractive materials to date, their instability significantly influences device p

Blue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-

Because of its less toxicity and electronic structure analogous to that of lead, tin halide perovskite (THP) is currently one of the most favorable candidates as an active layer for optoelectronic and electric devices such as solar cells, photodiodes, and field-effect transistors (FETs). Promising photovoltaics and FETs performances have been recently demonstrated because of their desirable electrical and optical properties. Nevertheless, THP's easy oxidation from Sn²⁺ to Sn<sup>4+</s

A high‐performance semitransparent tandem solar cell that uses solution‐processed graphene mesh and laminated Ag NW as a transparent anode and cathode, respectively, is demonstrated. The laminated top electrode can be deposited without causing any damage to the underneath organic solar cells. Power conversion efficiencies of 8.02% and 6.47% are obtained when the light is projected from the solution‐processed graphene mesh and laminated AgNW, respectively. The performance of the tandem cell is fo

A graphical abstract is available for this content

We demonstrate an ITO-free tandem polymer solar cell employing Au-doped single layer graphene nanoribbons.

Organo-metal halide perovskite field-effect transistors present serious challenges in terms of device stability and hysteresis in the current-voltage characteristics. Migration of ions located at grain boundaries and surface defects in the perovskite film are the main reasons for instability and hysteresis issues. Here, we introduce a perovskite grain molecular cross-linking approach combined with amine-based surface passivation to address these issues. Molecular cross-linking was achieved throu