Anuruddh Kumar 교수

In this article, the performance of various piezoelectric materials is simulated for the unimorph cantilever-type piezoelectric energy harvester. The finite element method (FEM) is used to model the piezolaminated unimorph cantilever structure. The first-order shear deformation theory (FSDT) and linear piezoelectric theory are implemented in finite element simulations. The genetic algorithm (GA) optimization approach is carried out to optimize the structural parameters of mechanical energy-based

This study comprises the combined effect of piezocatalytic and photocatalytic activity to obtain improved piezo-photocatalytic dye degradation efficiency in visible light. Single-phase Bi2VO5.5 powder was prepared through solid-state synthesis at 750 °C in 8 h. Time-dependent photocurrent responses were conducted to understand the phenomenon of charge carrier transport in visible light. Bi2VO5.5 powder sample demonstrated high photocatalytic efficiency and good reusability possessing a bandgap v

0.5Ba (Zr0.2Ti0.8)O3-0.5(Ba0.7Sr0.3)TiO3 (BST-BZT) ceramic composition is known for exihibiting electrical properties. The present study brings out the prospective approach of utilizing well known BST-BZT ceramic composition for water cleaning application via piezocatalysis, photocatalysis and piezo-photocatalysis process. For this, BST-BZT ceramic composition was synthesized through solid state route reaction method and was characterized by scanning electron microscopy (SEM), X-ray diffraction

This study proposes the design of a micro-spiral-shaped piezoelectric energy harvester that scavenges energy from blood pressure variation in the cardiac cycle. The harvester can be a miniaturized perennial source of power that could even eliminate the need for replacement of conventional batteries used in current pacemaker technology. The concept of a 25 µm thin spiral-based piezoelectric energy harvester with a diameter of 6 mm satisfying the dimensional constraints has been proposed. A number

A thermoregulating smart textile based on phase change material (PCM) polyethylene glycol (PEG) was prepared by chemically grafting carboxyl-terminated PEG onto cotton. Further deposits of graphene oxide (GO) nanosheets were made on the PEG grafted cotton (PEG-g-Cotton) to improve the thermal conductivity of the fabric and to block harmful UV radiation. The GO-PEG-g-Cotton was characterized by Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectroscopy, X-

This study proposes the cantilever design of piezoelectric energy harvester scavenging energy from blood pressure variation in cardiac cycle. The harvester could be a perennial source of power for a typical pacemaker. The concept of three cm long and 72 μm thin cantilever based energy harvester having natural frequency close to that of heartbeat has been proposed. Considering a huge difference between shear (d15) and transverse (d31) piezoelectric coefficient the harvester was operated in two di

This study focuses on analyzing the poling effect of BaBi₄Ti₄O₁₅ (BBT) on the basis of photo and piezo-catalysis performance. BBT powder is prepared via a solid state reaction followed by calcination at 950 °C for 4 h. BBT is characterized by an X-ray diffractometer, scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The optical bandgap of BBT is evaluated with the help of Tauc's plot and found to be 3.29 eV, which comes in th

In this article, we focus on cement-binded Ba 0.85 Sr 0.15 Zr 0.1 Ti 0.9 O 3 ceramics for pyroelectric applications. It was prepared with the Ba 0.85 Sr 0.15 Zr 0.1 Ti 0.9 O 3 -to-cement ratios of 85%:15% and 80%:20% by weight. In order to improve the effectiveness of thermal-to-electric energy conversion, the synchronized switch harvesting on inductor technique is experimentally tested on cement composites. Our experimental findings reveal that this concept based on synchronized switch harvesti

The mechanochemical ball milling followed by heating at 650 °C for 5 h successfully produced the single-phase Bi₂VO_5.5 powder. Catalytic activity for methylene blue dye degradation was investigated. Raman spectroscopy and X-ray diffraction were used to confirm the phase formation. The sample's charge carrier transportation behavior was ascertained using time-dependent photocurrent analysis. The piezo-photocatalysis experiment yielded a 63% degradation efficiency for the bal

Abstract The thermal energy harvesting potential of different pyroelectric materials including Sr 0.5 Ba 0.5 Nb 2 O 5 (SBN), [Bi 0.48 Na 0.4032 K 0.0768 ] Sr 0.04 (Ti 0.975 Nb 0.025 )O 3 (BNT‐Nb), Ba 0.85 Sr 0.15 Zr 0.1 Ti 0.9 O 3 (BST‐BZT), Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCT‐BZT), and Ba 0.9 Ca 0.1 TiO 3 (BCT) ceramics is compared. Amongst these materials, BCT is found to be best for pyroelectric energy harvesting. Open‐circuit voltages were found to be 1.7 V, 500 mV, 650 mV, 600 mV, and 40

The fabrication of a Poly (vinylidene fluoride) membrane (PVDF) and ceramic-assisted bismuth vanadate-polyvinylidene fluoride (BiVO₄-PVDF) composite membrane was achieved through the utilization of the electrospinning technique. The composition and structure of the fabricated membranes were characterized by X-ray powder diffraction, Raman analysis, scanning electron microscopy, Thermo gravimetric analyzer, Fourier transform infrared spectroscopy, and UV-Vis spectroscopy techniques. Th

In this study, the bi-functional performance of a small-scale piezoelectric cantilever, which coupled piezoelectric and elastocaloric phenomena in a single device to produce energy harvesting as well as refrigeration effects due to vibration, has been investigated. Finite element modeling has been used to examine the performance of the device. The basic structure of the device is a cantilever that vibrates between two thermal bodies (hot and cold). The properties of BaTiO₃ (single cry