Bright Walker
경희대학교 화학과 · 공학
브라이트 워커 교수의 연구실은 유기 태양전지의 효율성과 상용화 가능성을 높이기 위해 소분자 기반의 활성층 재료 개발에 집중하고 있습니다. 특히, 고순도, 대량 생산이 가능한 분자 고체를 활용한 밴드갭 제어 및 상호작용 최적화를 통해 고성능 헤테로제너이션 구조를 설계합니다. 또한, 솔ubility 파라미터 기반의 용매 선별과 열처리를 통한 미세구조 제어를 통해 높은 전환 효율을 달성하는 데 초점을 맞추고 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
Although most research in the field of organic bulk heterojunction solar cells has focused on combinations of a p-type conducting polymer as a donor and a fullerene-based acceptor, recent work has demonstrated the viability of solution-processed heterojunctions composed entirely of molecular solids. Molecular solids offer potential advantages over conjugated polymer systems in terms of easier purification, amenability to mass-scale production and better batch-to-batch reproducibility. This artic
Abstract Research relating to organic solar cells based on solution‐processed, bulk heterojunction (BHJ) films has been dominated by polymeric donor materials, as they typically have better film‐forming characteristics and film morphology than their small‐molecule counterparts. Despite these morphological advantages, semiconducting polymers suffer from synthetic reproducibility and difficult purification procedures, which hinder their commercial viability. Here, a non‐polymeric, diketopyrrolopyr
Abstract The solubilities of 3,6‐bis(5‐(benzofuran‐2‐yl)thiophen‐2‐yl)‐2,5‐bis(2‐ethylhexyl)pyrrolo[3,4‐c]pyrrole‐1,4‐dione ( DPP(TBFu) 2 ) and [6,6]‐phenyl‐C 71 ‐butyric acid methyl ester ( PC 71 BM ) in a series of solvents are measured, and this data is used to calculate the Hansen solubility parameters of the two materials. The dispersion, polar, and H‐bonding parameters of DPP(TBFu) 2 and PC 71 BM were found to be (19.3, 4.8, 6.3) and (20.2, 5.4, 4.5) MPa 1/2 , respectively, with an error o
We report a series of solution-processable, small-molecule, donor materials based on an architecture consisting of two diketopyrrolopyrrole (DPP) cores with different aromatic π-bridges between the DPP units and different end-capping groups. In general, this architecture leads to desirable light absorption and electronic levels for donor materials. Out of the compounds investigated, a material with a hydrolyzed dithieno(3,2-b;2′,3′-d)silole (SDT) core and 2-benzofuran (BFu) end capping groups le
The emerging class of lead halide perovskite (LHP) semiconductors offers a surprising combination of low cost, ease of preparation, outstanding material properties, and performance in optoelectronic devices that has not yet been observed in any other class of material. Considering their general ABX<sub>3</sub> formula, the halide (X) composition in LHP compositions has proven to be one of the best handles to control the material characteristics such as bandgap, morphology, and electronic propert
Electron transport layers are used to minimize energetic barriers to electron injection and extraction in methylammonium lead bromide films, allowing photocurrent generation and light emission from “peroptronic” light-emitting solar cells.
Although one of the most attractive aspects of organic solar cells is their low cost and ease of fabrication, the active materials incorporated into the vast majority of reported bulk heterojunction (BHJ) solar cells include a semiconducting polymer and a fullerene derivative, classes of materials which are both typically difficult and expensive to prepare. In this study, we demonstrate that effective BHJs can be fabricated from two easily synthesized dye molecules. Solar cells incorporating a d
Hybrid organic–inorganic perovskites (HOIPs) have attracted considerable attention for their scientific and technological potential in photovoltaics and optoelectronic devices.
