이병양 교수

We demonstrate a controllable and reliable process for manifesting color patterns on solid substrates using cellulose nanocrystals (CNCs) without the use of any other chemical pigments. The color can be controlled by adjusting the assembly conditions of the CNC solution during a dip-and-pull process while aiding the close packing of CNCs on a solid surface with the help of ionic-liquid (1-butyl-3-methylimidazolium) molecules that screen the repelling electrostatic charges between CNCs. By contro

Carbon nanotube (CNT) network-based sensors have been often considered unsuitable for practical applications due to their unpredictable characteristics. Herein, we report the study of universal parameters which can be used to characterize CNT network-based sensors and make their response predictable. A theoretical model is proposed to explain these parameters, and sensing experiments for mercury (Hg(2+)) and ammonium (NH(4)(+)) ions using CNT network-based sensors were performed to confirm the v

We demonstrate a dielectric elastomer actuator (DEA) with a high areal strain value of 146% using hybrid electrodes of silver nanowires (AgNWs) and single-walled carbon nanotubes (SWCNTs). The addition of a very small amount of SWCNTs (∼35 ng mm^-2) to a highly resistive AgNW network resulted in a remarkable reduction of the electrode sheet resistance by three orders, increasing the breakdown field by 183% and maximum strain, while maintaining the reduction of optical transmittance wit

We developed a carbon nanotube (CNT)-based biosensor system-on-a-chip (SoC) for the detection of a neurotransmitter. Here, 64 CNT-based sensors were integrated with silicon-based signal processing circuits in a single chip, which was made possible by combining several technological breakthroughs such as efficient signal processing, uniform CNT networks, and biocompatible functionalization of CNT-based sensors. The chip was utilized to detect glutamate, a neurotransmitter, where ammonia, a byprod

For the first time, vertically suspended and stretched carbon nanotube network junctions were fabricated in large quantity via the directed assembly strategy using only conventional microfabrication facilities. In this process, surface molecular patterns on the side-wall of the Al structures were utilized to guide the assembly and alignment of carbon nanotubes in the solution. We also performed extensive experimental (electrical and mechanical) analysis and theoretical simulation about the verti

Supercapacitors are strong future candidates for energy storage devices owing to their high power density, fast charge-discharge rate, and long cycle stability. Here, a flexible supercapacitor with a large specific capacitance of 443 F g^-1 at a scan rate of 2 mV s^-1 is demonstrated using nanotube-reinforced polypyrrole nanowires with hollowed cavities grown vertically on a nanotube/graphene based film. Using these electrodes, we obtain improved capacitance, rate capability,

Modified floating electrode-based sensors were developed to quantitatively monitor the levels of tumor necrosis factor α (TNF-α), a pro-inflammatory cytokine related with inflammatory bowel disease (IBD), and to evaluate the effect of drugs on the cytokine levels. Here, antibodies (anti-TNF-α) were immobilized on the floating electrodes of carbon nanotube devices, enabling selective and real-time detection of TNF-α among various cytokines linked to IBD. This sensor was able to measure the concen

A SWNT-FET directly functionalized with immunoglobulin M shows a wide detection range from sub-picomolar to micromolar with an excellent sensitivity due to chemical gating in selective monitoring of fungal allergens.

The essential therapeutic cues provided by a nanofibrous arginine-glycine-aspartic acid-engineered M13 phage were exploited as extracellular matrix (ECM)-mimicking niches, contributing to de novo soft tissue niche engineering. The interplay of biomimetic phage cues with surrounding organ tissues was identified, and cells were implanted between tissues to achieve an appropriate soft tissue niche that enables the proper functioning of the implanted stem cells at the injured site. With the polyacry

We report a simple but efficient method to synthesize carbon nanotube-bridged wires (NBWs) with gaps as small as 5 nm. In this method, we have combined a strategy for assembling carbon nanotubes (CNTs) inside anodized aluminum oxide pores and the on-wire lithography technique to fabricate CNT-bridged wires with gap sizes deliberately tailored over the 5-600 nm range. As a proof-of-concept demonstration of the utility of this architecture, we have prepared NBW-based chemical and biosensors which

We developed a method to control the structure of CdTe nanowires by adopting Bi-mixed CdTe powder source to a catalyst-assisted chemical vapor deposition, which allowed us to fabricate CdTe/CdS hierarchical nanostructures. We demonstrated that diverse nanostructures can be grown depending on the combination of the Bi powder and film catalysts. As a proof of concepts, we grew CdTe/CdS branched nanowires for the fabrication of photodetectors. The hierarchical nanostructure-based photodetectors sho

We demonstrate a highly sensitive and flexible bending strain sensor using tin-doped indium oxide (ITO) nanoparticles (NPs) assembled in line patterns on flexible substrates. By utilizing transparent ITO NPs without any surface modifications, we could produce strain sensors with adjustable gauge factors and optical transparency. We were able to control the dimensional and electrical properties of the sensors, such as channel height and resistance, by controlling the NP assembly speed. Furthermor