D. V. Louzguine 교수

This overview paper summarizes a large number of data connected with nano-devitrification of metallic glassy and amorphous alloys on heating which form nanoscale crystalline or quasicrystalline particles. In some alloys this effect leads to formation of the nanocomposites with enhanced mechanical properties compared to fully glassy and crystalline alloys.

This article summarizes the general structural features and important properties of quasicrystals, a relatively new class of materials belonging to solid-state substances. Quasicrystals, which have a long-range quasiperiodic order but no three-dimensional translational periodicity, are structurally different from both conventional crystals and glassy solids. Although applications are still highly limited, quasicrystals are attracting significant attention as a structual constituent of mixed-phas

Low ductility of glassy alloys prevents their technical application as structural materials. In this work, we study the Cu-based crystal-glassy composite material with good mechanical properties. Formation of the Cu10Zr7 phase in the glassy matrix of a high-strength Cu50Zr30Ti10Nb10 bulk alloy upon solidification led to higher Young’s modulus and enhanced ductility of such a composite compared to Cu-based glassy alloys. The as-cast structure was studied by x-ray diffraction and scanning electron

The letter describes influence of the electronegativity of the constituent rare-earth metals on the supercooled liquid region in the Al–(Gd, Dy or Er)–Ni–Co metallic glasses. The samples were studied by x-ray diffractometry and differential scanning calorimetry. Calorimetry data for the La and Sm—bearing glasses studied earlier were also taken in consideration for comparison. It is found that supercooled liquid range in the Al85RE8Ni5Co2 alloys strongly depends upon electronegativity of the RE m

The present letter shows how a continuous heating transformation diagram for a Cu60Hf25Ti15 metallic glass can be obtained by applying an extension of the Kissinger analysis. According to the calculation this glass is completely stable in the Earth’s climate for its lifetime. This extension of the Kissinger analysis method can be applied to any other metallic glass.

Metallic glasses demonstrate unique properties, including large elastic limit and high strength, which make them attractive for practical applications. Unlike crystalline alloys, metallic glasses, in general, do not exhibit a strain hardening effect, while plastic deformation at room temperature is localized in narrow shear bands. Room-temperature mechanical properties and deformation behavior of bulk metallic glassy samples and the crystal-glassy composites are reviewed in the present paper.