Do Kyung Kim
KAIST 전기및전자공학부 · 공학
도경김 교수의 연구실은 나노소재를 기반으로 한 에너지 저장 및 전도성 소재의 개발에 중점을 두고 있습니다. 리튬이온 이차전지의 고성능 카디온 재료로써 리튬マン간산화물 나노막대, 고체 전해질을 활용한 나트륨 이온 전지의 전기화학적 활성 물질, 그리고 텅스텐 산화물과 같은 다기능 나노소재의 구조 제어 합성을 연구하고 있습니다. 또한 생체의학 응용을 위한 자기공명영상(MRI)용 슈퍼파라자임틱 산화철 나노입자 및 친환경적 편의성과 유연성을 갖춘 피에조전기 에너지 수확 장치 개발도 함께 진행하고 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
Spinel LiMn2O4 is a low-cost, environmentally friendly, and highly abundant material for Li-ion battery cathodes. Here, we report the hydrothermal synthesis of single-crystalline beta-MnO2 nanorods and their chemical conversion into free-standing single-crystalline LiMn2O4 nanorods using a simple solid-state reaction. The LiMn2O4 nanorods have an average diameter of 130 nm and length of 1.2 microm. Galvanostatic battery testing showed that LiMn2O4 nanorods have a high charge storage capacity at
Monoclinic S8 , an uncommon allotrope of sulfur at room temperature, can be formed when common orthorhombic S8 is heat-treated under enclosed environments in nanometer dimensions. Monoclinic S8 prevents the formation of soluble polysulfides during battery operation, resulting in unprecedented cycling performance over 1000 cycles under the highest sulfur content to date.
Superparamagnetic iron oxide nanoparticles (SPION) with suitable bio-compatible coatings have been used in biomedicine, particularly in magnetic resonance imaging (MRI), tissue engineering, and drug delivery applications. In this study, we describe the synthesis of SPION and its use for experimental in-vivo applications in MRI. SPION with a mean size of 6 nm have been prepared under inert atmosphere, in a polymeric starch matrix, by controlled chemical coprecipitation of magnetite phase from aqu
A simple process enables to synthesize tungsten oxide with various nanomorphologies, i.e. nanorods, nanowires, and nanosheets. The tungsten hexachloride (WCl 6 ) was used as a raw material and the tungsten oxide nanoparticles were obtained by solvothermal treatment with solvents, i.e., ethanol, mixed solvent (ethanol+water), and water, at 200°C for 10 h. The various crystalline phases of tungsten oxide, such as monoclinic W 18 O 49 nanorods, hexagonal WO 3 platelets, and monoclinic WO 3 nanoshee
Lead-free piezoelectric 0.5(Ba<sub>0.7</sub>Ca<sub>0.3</sub>)TiO<sub>3</sub>-0.5Ba(Zr<sub>0.2</sub>Ti<sub>0.8</sub>)O<sub>3</sub> (BCTZ) nanoparticles (NPs) composed of earth-abundant elements were adopted for use in a flexible composite-based piezoelectric energy harvester (PEH) that can convert mechanical deformation into electrical energy. The solid-state synthesized BCTZ NPs and silver nanowires (Ag NWs) chosen to reduce the toxicity of the filler materials were blended with a polydimethylsi
The reversible electrochemical activity of the Na<sub>3</sub>V<sub>2</sub>O<sub>2x</sub>(PO<sub>4</sub>)<sub>2</sub>F<sub>3−2x</sub> compound in an aqueous solution is reported for the first time.
Lithium-sulfur batteries (Li-S) are considered the most promising systems for next-generation energy storage devices due to their high theoretical energy density and relatively low cost. However, the practical applications of Li-S batteries are hindered by the poor electronic conductivity of sulfur and capacity degradation resulting from the shuttle effect of lithium polysulfides (LiPSs). Herein, we demonstrate use of a tin-sulfide (SnS<sub>2</sub>) modified separator to facilitate the redox rea
A piezoelectric PMN–PT single nanowire connected to an electrode-patterned plastic substrate using FIB deposition is characterized under mechanical bending.
