Dong Suk Kim 교수

Further improvement and stabilization of perovskite solar cell (PSC) performance are essential to achieve the commercial viability of next-generation photovoltaics. Considering the benefits of fluorination to conjugated materials for energy levels, hydrophobicity, and noncovalent interactions, two fluorinated isomeric analogs of the well-known hole-transporting material (HTM) Spiro-OMeTAD are developed and used as HTMs in PSCs. The structure-property relationship induced by constitutional isomer

Planar perovskite solar cells (PSCs) fabricated by intramolecular exchange with PbI2(DMSO) and PbI2(NMP) complexes and the high performance of these cells are described. Their films are easily deposited with a one-step spray-coating and were effectively converted into high-quality FAPbI3-based perovskite layers. PbI2(NMP)-derived PSCs yielded a power conversion efficiency as high as 19.5%, higher than that of PbI2(DMSO)-derived PSCs. As a service to our authors and readers, this journal provides

The photocatalytic inactivation of Escherichia coli with the film adhesion method by using Degussa P25TiO2 and mesoporous TiO2 coated on glass was investigated. Monodisperse spherical mesoporous TiO2 with a morphology size of approximately 800 nm was synthesized via the sol-gel approach and coated onto glass substrates without cracking by using the doctor blade method with various amounts of polyethylene oxide (PEO) and polyethylene glycol (PEG). Photocatalytic disinfection was tested by varying

Abstract Hole transport materials (HTMs) play essential roles in achieving high photovoltaic performance and long‐term stability in the n–i–p structure of perovskite solar cell (PSC) devices. Recently, dopant‐free polymeric materials as HTMs in PSCs have attracted considerable attention owing to high carrier mobility and excellent hydrophobicity. However, achieving similar efficiencies to those of doped small molecule HTMs such as Spiro‐OMeTAD is a big challenge. Herein, a thienothiophene π‐brid

Abstract The prominent chemical bath deposition (CBD) method leverages tin dioxide (SnO 2 ) as an electron transport layer (ETL) in perovskite solar cells (PSCs), achieving exceptional efficiency. The deposition of SnO 2 , however, can lead to the formation of oxygen vacancies and surface defects, which subsequently contribute to performance challenges such as hysteresis and instability under light‐soaking conditions. To alleviate these issues, it is crucial to address heterointerface defects an

The trifluoroacetate pseudohalide anion, with dual functionalities, is introduced at the buried interface to promote orderly growth. This results in a power conversion efficiency of 25.60% and long-term stability under light exposure.

Organic solar cells fabricated with Cu grid/graphene hybrid transparent electrodes exhibit both excellent device performance and long-term stability.

We demonstrate a practical route to synthesize Ge nanoparticles (NPs) in multi-gram quantities via the laser pyrolysis of GeH4 gas. The size of the as-produced Ge NPs can be precisely controlled in the range of 19.0 to 65.9 nm via a subsequent etching procedure using a dilute H2O2 solution. Stable water dispersions of Ge NPs yield particles with a Ge/GeO2 core-shell structure, however, the oxide shell can easily be removed and passivated by treatment with HCl. The feed materials used in this pro

Abstract Surface passivation has been widely employed to suppress non‐radiative charge recombination and prevent interfacial charge accumulation in perovskite photovoltaics. In this report, carbazole modified with ammonium iodide connected via alkyl chains of different lengths (i.e., ethyl, butyl, and hexyl chains) is used to form passivation layers on formamidinium lead triiodide FAPbI 3 ‐based perovskite films to improve operational stability. Owing to the strong hydrophobicity of the carbazol

Three new hole transport materials were designed using an end-group strategy for perovskite solar cells to achieve remarkable efficiency approaching 25% at a low concentration in an environmentally friendly solvent.

The first high-efficiency hybrid solar cell of its type comprising p-type silicon with an organic n-type C₆₀ layer is demonstrated.

The photovoltaic performance of inverted perovskite solar cells (PSCs) relies on effectively managing the interface between the hole extraction layer and the light-absorbing perovskite layer. In this study, we have synthesised (4-(3,6-bis(methylthio)-9H-carbazol-9-yl)butyl)phosphonic acid (MeS-4PACz), which forms a self-assembled monolayer (SAM) on the fluorine-doped tin oxide (FTO) electrode. The molecule's methylthio substituents generate a favourable interfacial dipole moment and interact wit