Han Young Woo 교수

Recent advances in nonfullerene acceptors (NFAs) have enabled the rapid increase in power conversion efficiencies (PCEs) of organic photovoltaic (OPV) cells. However, this progress is achieved using highly toxic solvents, which are not suitable for the scalable large-area processing method, becoming one of the biggest factors hindering the mass production and commercial applications of OPVs. Therefore, it is of great importance to get good eco-compatible processability when designing efficient O

A new acceptor-donor-acceptor-structured nonfullerene acceptor ITCC (3,9-bis(4-(1,1-dicyanomethylene)-3-methylene-2-oxo-cyclopenta[b]thiophen)-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d':2,3-d']-s-indaceno[1,2-b:5,6-b']-dithiophene) is designed and synthesized via simple end-group modification. ITCC shows improved electron-transport properties and a high-lying lowest unoccupied molecular orbital level. A power conversion efficiency of 11.4% with an impressive V _OC of over 1 V is

A highly efficient fullerene-free polymer solar cell (PSC) based on PDCBT, a polythiophene derivative substituted with alkoxycarbonyl, achieves an impressive power conversion efficiency of 10.16%, which is the best result in PSCs based on polythiophene derivatives to date. In comparison with a poly(3-hexylthiophene):ITIC-based device, the photovoltaic and morphological properties of the PDCBT:ITIC-based device are carefully investigated and interpreted.

A series of organic- and water-soluble distyrylbenzene-based two-photon absorption (TPA) fluorophores containing dialkylamino donor groups at the termini was designed, synthesized, and characterized. The central core was systematically substituted to modulate intramolecular charge transfer (ICT). These molecules allow an examination of solvent effects on the TPA cross section (delta) and on the TPA action cross section. In toluene, the delta values follow the order of ICT strength. The effect of

A series of ternary organic photovoltaics (OPVs) are fabricated with one wide bandgap polymer D18-Cl as donor, and well compatible Y6 and Y6-1O as acceptor. The open-circuit-voltage (<i>V_OC</i> ) of ternary OPVs is monotonously increased along with the incorporation of Y6-1O, indicating that the alloy state should be formed between Y6 and Y6-1O due to their excellent compatibility. The energy loss can be minimized by incorporating Y6-1O, leading to the <i>V_OC</i> improvemen

Despite the recent breakthroughs of polymer solar cells (PSCs) exhibiting a power conversion efficiency of over 17%, toxic and hazardous organic solvents such as chloroform and chlorobenzene are still commonly used in their fabrication, which impedes the practical application of PSCs. Thus, the development of eco-friendly processing methods suitable for industrial-scale production is now considered an imperative research focus. This Review provides a roadmap for the design of efficient photoacti

Development of high-performance unipolar n-type organic semiconductors still remains as a great challenge. In this work, all-acceptor bithiophene imide-based ladder-type small molecules BTI n and semiladder-type homopolymers PBTI n ( n = 1-5) were synthesized, and their structure-property correlations were studied in depth. It was found that Pd-catalyzed Stille coupling is superior to Ni-mediated Yamamoto coupling to produce polymers with higher molecular weight and improved polymer quality, thu

A well-organized donor-acceptor crystalline structure is examined for high -performance nonfullerene solar cells. By thermal annealing, nanoscale structures of both donor and acceptor domains are successfully modulated, followed by -significant changes in the resulting -photovoltaic characteristics. When annealed at 90 °C, a maximum power conversion efficiency of 7.64% with a -remarkable open-circuit voltage of 1.03 V is obtained.

Two wide band gap polymer donors were developed for fullerene-free polymer solar cells. The photovoltaic performance of the PB3T:IT-M device processed by anisole achieved a high PCE of 11.9%.

Two new bithiophene imide (BTI)-based n-type polymers were synthesized. f-BTI2-FT based on a fused BTI dimer showed a smaller band gap, a lower LUMO, and higher crystallinity than s-BTI2-FT containing a BTI dimer connected through a single bond. s-BTI2-FT exhibited a remarkable electron mobility of 0.82 cm² V^-1 s^-1 , and f-BTI2-FT showed a further improved mobility of 1.13 cm² V^-1 s^-1 in transistors. When blended with the polymer

Although the rapid development of polymer solar cells (PSCs) has been achieved, it is still a great challenge to explore efficient ways for improving power conversion efficiency (PCE) of PSCs from materials and device engineering. Ternary strategy has been confirmed as an efficient way to improve PCE of PSCs by employing three kinds of materials. In this work, one polymer donor PM6, and two non-fullerene materials N3 and MF1 are selected to prepare ternary PSCs with layer-by-layer (LbL) or bulk-