Hitoshi SOYAMA 교수

Mechanical surface modification such as shot peening offer powerful enhancement of fatigue properties of metals and other materials. Cavitation usually causes surface damage in hydraulic machineries. However, careful selection of process parameters allowed developing an approach known as “cavitation peening.” Its advantage is surface roughness increase is lower than in conventional shot peening as there are no solid collisions involved. As cavitation is a hydrodynamic phenomenon, an understandin

Abstract Cavitation impact, which normally produces severe damage in hydraulic machinery, can be used to modify surfaces in the same way as shot peening. Cavitation impact enables the surface of a material to be peened without the use of shot, thus it is called cavitation shotless peening. As there are no solid body collisions occurring in this peening process, the roughness of the peened surface should be less than that produced by shot peening. This characteristic makes it suitable for peening

The most popular surface modification technology used to enhance the mechanical properties of metallic materials is shot peening. Shot peening improves fatigue life and strength by introducing local plastic deformation pits. However, the pits increase surface roughness, which is a disadvantage for fatigue properties. Recently, cavitation peening, in which cavitation bubble collapse impacts are used, has been developed as an advanced surface modification technology. The advantage of cavitation pe

In an attempt to strengthen the surface of materials, the potential of using a cavitating jet to form compressive residual stress has been investigated. Introducing compressive residual stress to a material surface provides improvement of the fatigue strength and resistance to stress corrosion cracking. In general, cavitation causes damage to hydraulic machinery. However, cavitation impact can be used to form compressive residual stress in the same way as shot peening. In the initial stage, when

When a high-speed water jet is injected into water through a nozzle, cavitation is generated in the nozzle and/or shear layer around the jet. A jet with cavitation is called a “cavitating jet”. When the cavitating jet is injected into a surface, cavitation is collapsed, producing impacts. Although cavitation impacts are harmful to hydraulic machinery, impacts produced by cavitating jets are utilized for cleaning, drilling and cavitation peening, which is a mechanical surface treatment to improve

The erosion produced by cavitation is a serious problem in hydraulic machinery. During investigations of the dynamic loading generated by collapsing cavitation on a surface, a dynamic pressure transducer was developed. The piezoelectric polymer PVDF (Polyvinylidene fluoride) was used as the pressure sensitive material. A novel method of dynamic calibration has also been developed. The transducer is loaded through pencil lead by a beam supported at its other end on a knife edge and loaded at the

In order to eliminate stress corrosion cracking, a method of introduction of compressive residual stress using cavitation impacts was proposed, without use of shots. The cavitation impacts were successfully produced by a cavitating jet in air, without the requirement of a water-filled chamber. The injection condition of the jet was optimized and the introduction of compressive residual stress into stainless steel was demonstrated using the jet. The maximum compressive residual stress introduced

In order to enhance the aggressive intensity of a cavitating jet for practical applications, the effect of the geometry of the nozzle through which the jet is driven on the aggressive intensity was investigated. The nozzle under test was cylindrical and consisted of a plate and a cap with a hole bored through it. The aggressive intensity of the jet was estimated by the erosion suffered by pure aluminum test specimens. The parameters varied were the bore diameter, D, and length, L, the standoff d

In this paper, we used a Venturi tube for generating hydrodynamic cavitation, and in order to obtain the optimum conditions for this to be used in chemical processes, the relationship between the aggressive intensity of the cavitation and the downstream pressure where the cavitation bubbles collapse was investigated. The acoustic power and the luminescence induced by the bubbles collapsing were investigated under various cavitating conditions, and the relationships between these and the cavitati

Cavitation impact from a cavitation jet, which is formed from bubbles induced by a high-speed water jet in water, can be used for surface modification in a similar manner to shot peening. A cavitating jet is normally produced by injecting a high-speed water jet into a water-filled chamber. It is possible to make a cavitating jet in air by injecting a high-speed water jet into a concentric low-speed water jet that surrounds the high-speed jet. In order to demonstrate this, a high-speed water jet