고려대학교 · Engineering
홍규파르 교수의 연구실은 나노광학 및 광반도체 소자 분야에서 활발한 연구를 수행하고 있습니다. 주요 연구 방향은 고품질 인코어드 광학 공진기, 특히 Bound States in the Continuum(BIC)을 활용한 초소형 레이저 및 비선형 광학 소자의 설계와 구현입니다. 특히, 전기 구동 가능한 단일 모드 레이저, 초저임계 전류 레이저, 그리고 고품질 인코어드 모드를 통한 효율적 광학 증폭을 목표로 하고 있습니다. 이는 차세대 통신, 양자광학 소자 및 통합 광전자 소자에 응용 가능합니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
Subwavelength optical resonators made of high-index dielectric materials provide efficient ways to manipulate light at the nanoscale through mode interferences and enhancement of both electric and magnetic fields. Such Mie-resonant dielectric structures have low absorption, and their functionalities are limited predominantly by radiative losses. We implement a new physical mechanism for suppressing radiative losses of individual nanoscale resonators to engineer special modes with high quality fa
We report the experimental demonstration of an electrically driven, single-mode, low threshold current (approximately 260 microA) photonic band gap laser operating at room temperature. The electrical current pulse is injected through a sub-micrometer-sized semiconductor wire at the center of the mode with minimal degradation of the quality factor. The actual mode of interest operates in a nondegenerate monopole mode, as evidenced through the comparison of the measurement with the computation bas
Wavelength-scale lasers provide promising applications through low power consumption requiring for optical cavities with increased quality factors. Cavity radiative losses can be suppressed strongly in the regime of optical bound states in the continuum; however, a finite size of the resonator limits the performance of bound states in the continuum as cavity modes for active nanophotonic devices. Here, we employ the concept of a supercavity mode created by merging symmetry-protected and accident
The resonant modes found in a modified single-defect two-dimensional photonic crystal slab structure are theoretically and experimentally studied. There exist several modes in the band gap: doubly degenerate (dipole and quadrupole modes) and nondegenerate (hexapole and monopole modes). Among them, the monopole mode specifically attracts our interest because of its nondegeneracy, good coupling with the gain medium, and existence of the intensity minimum at the center of the cavity, which would op
We propose and demonstrate photonic band gap lasing action from a nondegenerate monopole-mode, high-quality factor cavity. By optical pumping at room temperature, the monopole-mode laser is realized and identified from its mode shape, spectrum, and polarization. The monopole-mode laser shows nondegeneracy and genuine two-dimensional oscillation with incident threshold pump power less than 0.3 mW. This laser mode has a small modal volume of ∼4.5(λ/2nslab)3 and shows a quality factor of larger tha
Abstract Recent discoveries of exotic physical phenomena, such as unconventional superconductivity in magic‐angle twisted bilayer graphene, dissipationless Dirac fermions in topological insulators, and quantum spin liquids, have triggered tremendous interest in quantum materials. The macroscopic revelation of quantum mechanical effects in quantum materials is associated with strong electron–electron correlations in the lattice, particularly where materials have reduced dimensionality. Owing to t
We study active dielectric metasurfaces composed of two-dimensional arrays of split-nanodisk resonators fabricated in InGaAsP membranes with embedded quantum wells. Depending on the geometric parameters, such split-nanodisk resonators can operate in the optical anapole regime originating from an overlap of the electric dipole and toroidal dipole Mie-resonant optical modes, thus supporting strongly localized fields and high-<i>Q</i> resonances. We demonstrate room-temperature lasing from the anap
Quantum confinement in transition metal dichalcogenides (TMDCs) enables the realization of deterministic single-photon emitters. The position and polarization control of single photons have been achieved via local strain engineering using nanostructures. However, most existing TMDC-based emitters are operated by optical pumping, while the emission sites in electrically pumped emitters are uncontrolled. Here, we demonstrate electrically driven single-photon emitters located at the positions where
Nanolasers are key elements in the implementation of optical integrated circuits owing to their low lasing thresholds, high energy efficiencies, and high modulation speeds. With the development of semiconductor wafer growth and nanofabrication techniques, various types of wavelength-scale and subwavelength-scale nanolasers have been proposed. For example, photonic crystal lasers and plasmonic lasers based on the feedback mechanisms of the photonic bandgap and surface plasmon polaritons, respecti
Single-photon emitters, the basic building blocks of quantum communication and information, have been developed using atomically thin transition metal dichalcogenides (TMDCs). Although the bandgap of TMDCs was spatially engineered in artificially created defects for single-photon emitters, it remains a challenge to precisely align the emitter's dipole moment to optical cavities for the Purcell enhancement. Here, we demonstrate position- and polarization-controlled single-photon emitters in monol
We demonstrate room-temperature low-threshold-current lasing action from electrically driven wavelength-scale high-quality photonic crystal lasers having large spontaneous emission factors by solving the theoretical and technical constraints laid upon by the additional requirement of the current injection. The ultrasmall cavity is electrically pulse pumped through a submicron-size semiconductor "wire" at the center of the mode with minimal degradation of the quality factor. In addition, to bette
Polymer-based electronics with low bending stiffnesses and high flexibility, including recently reported macroporous syringe-injectable mesh electronics, have shown substantial promise for chronic studies of neural circuitry in the brains of live animals. A central challenge for exploiting these highly flexible materials for in vivo studies has centered on the development of efficient input/output (I/O) connections to an external interface with high yield, low bonding resistance, and long-term s