Hoon Eui Jeong 교수

We present a simple yet robust method for fabricating angled, hierarchically patterned high-aspect-ratio polymer nanohairs to generate directionally sensitive dry adhesives. The slanted polymeric nanostructures were molded from an etched polySi substrate containing slanted nanoholes. An angled etching technique was developed to fabricate slanted nanoholes with flat tips by inserting an etch-stop layer of silicon dioxide. This unique etching method was equipped with a Faraday cage system to contr

Multiscale, hierarchically patterned surfaces, such as lotus leaves, butterfly wings, adhesion pads of gecko lizards are abundantly found in nature, where microstructures are usually used to strengthen the mechanical stability while nanostructures offer the main functionality, i.e., wettability, structural color, or dry adhesion. To emulate such hierarchical structures in nature, multiscale, multilevel patterning has been extensively utilized for the last few decades towards various applications

A skin adhesive patch is the most fundamental and widely used medical device for diverse health-care purposes. Conventional skin adhesive patches have been mainly utilized for routine medical purposes such as wound management, fixation of medical devices, and simple drug release. In contrast to traditional skin adhesive patches, recently developed patches incorporate multiple key functions of bulky medical devices into a thin, flexible patch based on emerging nanomaterials and flexible electroni

A simple method for fabricating micro/nanoscale hierarchical structures is presented using a two-step temperature-directed capillary molding technique. This lithographic method involves a sequential application of the molding process in which a uniform polymer-coated surface is molded with a patterned mold by means of capillary force above the glass transition temperature of the polymer. Various microstructures and nanostructures were fabricated with minimum resolution down to approximately 50 n

Abstract Photonic skins enable a direct and intuitive visualization of various physical and mechanical stimuli with eye‐readable colorations by intimately laminating to target substrates. Their development is still at infancy compared to that of electronic skins. Here, an ultra‐adaptable, large‐area (10 × 10 cm 2 ), multipixel (14 × 14) photonic skin based on a naturally abundant and sustainable biopolymer of a shape‐memory, responsive multiphase cellulose derivative is presented. The wearable,

We introduce a simple yet robust method of fabricating a stretchable, adhesion-tunable dry adhesive by combining replica molding and surface wrinkling. By utilizing a thin, wrinkled polydimethyl siloxane (PDMS) sheet with a thickness of 1 mm with built-in micropillars, active, dynamic control of normal and shear adhesion was achieved. Relatively strong normal (approximately 10.8 N/cm(2)) and shear adhesion (approximately 14.7 N/cm(2)) forces could be obtained for a fully extended (strained) PDMS

A flexible microneedle patch that can transdermally deliver liquid-phase therapeutics would enable direct use of existing, approved drugs and vaccines, which are mostly in liquid form, without the need for additional drug solidification, efficacy verification, and subsequent approval. Specialized dissolving or coated microneedle patches that deliver reformulated, solidified therapeutics have made considerable advances; however, microneedles that can deliver liquid drugs and vaccines still remain

A simple, yet innovative, method is presented for fabricating high-aspect-ratio polymer nanohairs (aspect ratio >20) on a solid substrate by sequential application of molding and drawing of a thin polymer film. The polymer film was prepared by spin coating on a rigid or flexible substrate, and the temperature was raised above the polymer's glass transition while in conformal contact with a poly(urethane acrylate) mold having nanocavities. Consequently, capillary forces induced deformation of the

Stable and reversible adhesion to wet surfaces is challenging owing to water molecules at the contact interface. In this study, we develop a hydrogel-based wet adhesive, which can exhibit strong and reversible adhesion to wet and underwater surfaces as well as to dry surfaces. The remarkable wet adhesion of the hydrogel adhesive is realized based on a synergetic integration of bioinspired microarchitectures and water-friendly and water-absorbing properties of the polymeric hydrogel. Under dry co

Abstract This study presents a wet‐responsive and biocompatible smart hydrogel adhesive that exhibits switchable and controllable adhesions on demand for the simple and efficient transfer printing of nanomembranes. The prepared hydrogel adhesives show adhesion strength as high as ≈191 kPa with the aid of nano‐ or microstructure arrays on the surface in the dry state. When in contact with water, the nano/microscopic and macroscopic shape reconfigurations of the hydrogel adhesive occur, which turn

Anti-icing materials that can efficiently limit ice formation have a strong potential to replace existing anti-icing techniques, such as Joule heating, chemical release, or mechanical removal, which are usually inefficient, expensive, and environmentally harmful. In this study, an anti-icing material based on a magnetically responsive hierarchical hair array that can actively modulate drop bouncing dynamics is presented. The magnetically responsive hair array exhibits an immediate and reversible

Understanding how living cells interact with nanostructures is integral to a better understanding of the fundamental principles of biology and the development of next-generation biomedical/bioenergy devices. Recent studies have demonstrated that mammalian cells can recognize nanoscale topographies and respond to these structures. From this perspective, there is a growing recognition that nanostructures, along with their specific physicochemical properties, can also be used to regulate the respon

This feature article provides an overview of the recently developed two-step UV-assisted capillary force lithography and its application to fabricating well-defined micro/nanoscale hierarchical structures. This method utilizes an oxygen inhibition effect in the course of UV irradiation curing and a two-step moulding process, to form multiscale hierarchical or suspended nanobridge structures in a rapid and reproducible manner. After a brief description of the fabrication principles, several examp