Hosik Lee
UNIST 공과대학 기계공학부 · 공학
Hosik Lee 교수의 연구실은 전자구조 및 자기적 성질을 다루는 밀도함수이론 기반의 이론적 계산을 바탕으로, 나노스케일 물질의 자기성, 전도성, 기계적 안정성에 대한 근본 원리를 규명하는 데 중점을 두고 있습니다. 특히 그래프레인지의 표면 자기모멘트, 실리콘 양극의 고속 충전 메커니즘, 스핀트로닉스에서의 스핀 위상 보존 및 전기적 스핀 제어, 리튬이온 배터리의 고체 전도체 안정성 등 에너지 및 나노전자 소자 응용을 겨냥한 다학제적 연구를 수행하고 있습니다. 또한 비백금 계 촉매, 황 도핑, 티타늄 불순물 등 실용적 성능 향상을 위한 원자적 메커니즘 분석도 함께 진행하고 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
To understand the formation mechanism of magnetic moments at the edges of graphitic fragments, we carry out first-principles density-functional calculations for the electronic and magnetic structures of graphitic fragments with various spin and geometric configurations. We find that interedge and interlayer interactions between the localized moments can be explained in terms of interactions between the magnetic tails of the edge-localized states. In addition, the dihydrogenated edge states as we
A fast-charging battery that supplies maximum energy is a key element for vehicle electrification. High-capacity silicon anodes offer a viable alternative to carbonaceous materials, but they are vulnerable to fracture due to large volumetric changes during charge-discharge cycles. The low ionic and electronic transport across the silicon particles limits the charging rate of batteries. Here, as a three-in-one solution for the above issues, we show that small amounts of sulfur doping (<1 at%) ren
A non-vanishing electric field inside a non-centrosymmetric crystal transforms into a momentum-dependent magnetic field, namely, a spin–orbit field (SOF). SOFs are of great use in spintronics because they enable spin manipulation via the electric field. At the same time, however, spintronic applications are severely limited by the SOF, as electrons traversing the SOF easily lose their spin information. Here, we propose that in-plane ferroelectricity in (001)-oriented SnTe thin films can support
Good cyclability is essential for the potential application of cathode materials. Here, we investigate the structural stability of two-dimensional (2D) Li-layered and three-dimensional (3D) structured polymorphs of Li2FeSiO4 and Li2MnSiO4 using the density functional theory calculations. We find that all 2D Li-layered polymorphs of both materials are unstable upon full delithiation owing to layer exfoliation, which can lead to an amorphous structure. However, in contrast to the fact that the amo
We performed first-principles calculations to investigate the magnetic, mechanical and electronic properties of the tetrachalcogenide CrPS<sub>4</sub>. Although bulk CrPS<sub>4</sub> has been shown to exhibit a low-dimensional antiferromagnetic (AFM) ground state where ferromagnetic (FM) Cr-chains are coupled antiferromagnetically, our calculations indicated that the monolayer can be transformed to an FM material by applying a uniaxial tensile strain of ⩾4% along the FM Cr-chain direction. The A
Anion exchange membrane water electrolysis (AEMWE) is attracting attention as a next-generation technology for producing hydrogen from water. To maximize the efficiency of AEMWE systems, electrodes fabricated using nonprecious metal catalysts that possess high activity and durability are required to make the AEMWE system operable in alkaline environments. In this study, we investigate the effect of Ti impurities on the oxygen evolution reaction (OER) kinetics of NiFe2O4 (NFO). Ti impurities can
Heavy metal contamination from abandoned mine areas is a major threat for the environment. The study objective was to categorize the most polluted mine areas among 44 mine sites at the four cities of Chungcheongbuk-do province in South Korea. Both water and soil samples were collected from the mine area. The pH of the water and soil ranged from 3.6 to 8.5 and from 4.1 to 9.1 respectively. A significant amount of arsenic (As), cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb), zinc (Zn) and mercu
Electrochemical carbon dioxide reduction is a mild and eco-friendly approach for CO<sub>2</sub> mitigation and producing value-added products. For selective electrochemical CO<sub>2</sub> reduction, single-crystalline Au particles (octahedron, truncated-octahedron, and sphere) are synthesized by consecutive growth and chemical etching using a polydiallyldimethylammonium chloride (polyDDA) surfactant, and are surface-functionalized. Monodisperse, single-crystalline Au nanoparticles provide an ide
We investigated possible sources of defect-induced magnetic ordering in carbon-irradiated graphite from first-principles calculations. Among candidate structures with interstitial defect configurations that could be generated during carbon irradiation processes, two metastable configurations with finite magnetic moments were identified. They are coupled ferromagnetically to their neighboring defects, thereby enabling them to contribute to the observed macroscopic magnetic ordering. The Ruderman-
The laser flash photolysis process of diazomethane has been studied by using a real time propagation time-dependent density functional theory (RTP-TDDFT) combined with molecular dynamics. The activation energy barrier for disintegrating diazomethane into nitrogen (N(2)) and carbene (CH(2)) molecules significantly decreases in the electronic excited S(1) state compared to that in the S(0) ground state. Furthermore, the produced carbene molecule can be in the electronic excited state of (1)CH(2) (
Abstract Understanding the atomic mechanism of low‐temperature CO oxidation on a heterogeneous catalyst is challenging. We performed density functional theory (DFT) calculations to identify the surface structure and reaction mechanism responsible for low‐temperature CO oxidation on Pd/CeO 2 (100) surfaces. DFT calculations reveal the formation of a unique zigzag chain structure by the oxygen and Ce atoms of the topmost surface of CeO 2 (100) with Pd atoms located between the zigzag chains. O 2 a