Hokkaido University · 환경과학
Ilhwan Park 교수의 연구실은 철새 및 알루미늄 기반의 미세코팅 기술을 활용해 광석의 선택적 분리 및 환경 오염 저감을 목표로 합니다. 주로 porphyry Cu-Mo 광석에서 채플리어이트와 모리브데인트를 효율적으로 분리하기 위한 미세코팅 기반의 플로팅 조절 기법을 개발하고 있으며, 기존의 유해한 황화수소 기반 조절제를 대체할 수 있는 친환경적 기술을 연구하고 있습니다. 특히, Fe(III)PO₄ 및 Al-산화수화물 코팅을 통해 황화광물의 용해 억제 및 표면 특성 제어를 실현하고자 합니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
Mining activities often generate large amounts of sulfide-rich wastes containing arsenopyrite (FeAsS), which when dissolved releases toxic arsenic (As) and generates acid mine drainage (AMD) that are both disastrous to the environment. To suppress arsenopyrite dissolution, a technique that selectively coats sulfide minerals with a protective layer of Al-oxyhydroxide called Al-based carrier-microencapsulation (CME) was developed. Although a previous study of the authors showed that Al-based CME c
Porphyry copper deposits (PCDs) are some of the most important sources of copper (Cu) and molybdenum (Mo). Typically, the separation and recovery of chalcopyrite (CuFeS2) and molybdenite (MoS2), the major Cu and Mo minerals, respectively, in PCDs are achieved by two-step flotation involving (1) bulk flotation to separate Cu–Mo concentrates and tailings (e.g., pyrite, silicate, and aluminosilicate minerals) and (2) Cu–Mo flotation to separate chalcopyrite and molybdenite. In Cu–Mo flotation, chal
The leaching behavior of copper from Cu2O in H2SO4 solution was investigated to establish the leaching process for cathode powders produced by the recycling of waste printed circuit boards. When air was not introduced in sulfuric acid solution, the dissolution of copper from Cu2O was inhibited by the formation of elemental copper (Cu0). The dissociated cuprous ions (Cu+) transformed into elemental copper (Cu0) or cupric ions (Cu2+) owing to the instability of Cu+ in H2SO4. Cu+ can be reduced to
Porphyry Cu-Mo deposits, which are the most important sources of copper and molybdenum, are typically processed by flotation. In order to separate Cu and Mo minerals (mostly chalcopyrite and molybdenite), the strategy of depressing chalcopyrite while floating molybdenite has been widely adopted by using chalcopyrite depressants, such as NaHS, Na2S, and Nokes reagent. However, these depressants are potentially toxic due to their possibility to emit H2S gas. Thus, this study aims at developing a n
Porphyry-type deposits are the major sources of copper and molybdenum, and flotation has been adopted to recover them separately. The conventional reagents used for depressing copper minerals, such as NaHS, Na2S, and Nokes reagent, have the potential to emit toxic H2S gas when pulp pH was not properly controlled. Thus, in this study the applicability of microencapsulation (ME) using ferrous and phosphate ions as an alternative process to depress the floatability of chalcopyrite was investigated.
EDITORIAL article Front. Chem., 24 January 2023Sec. Green and Sustainable Chemistry Volume 11 - 2023 | https://doi.org/10.3389/fchem.2023.1146404
Arsenopyrite is the most common arsenic-bearing sulfide mineral in nature. It is readily oxidized and releases toxic arsenic (As) into the environment when exposed to atmospheric conditions via anthropogenic activities like mining, mineral processing, extractive metallurgy, and underground space developments. Carrier-microencapsulation (CME) is a technique that uses metal(loid)-organic complexes to selectively form protective coatings on the surfaces of sulfide minerals. In this study, CME using