한양대학교 · 컴퓨터과학
Inwhee Joe 교수의 연구실은 에너지 효율성과 지능형 네트워크 기반의 스마트 시스템 설계를 핵심으로 하며, 태양광 에너지 수확 기반 센서 노드의 에너지 예측, 인공지능 기반 이동 통신 네트워크 선택, 그리고 사용자 행동 패턴을 고려한 스마트 추천 시스템 등에 대해 연구하고 있습니다. 특히 에너지 제약이 있는 환경에서의 지속 가능성과 실시간 의사결정 능력을 향상시키는 데 초점을 맞추고 있으며, 딥러닝의 해석 가능성 문제 해결을 위한 시각적 설명 기법 개발도 함께 진행하고 있습니다. 이는 IoT, 셀프-패러럴 네트워크, 그리고 지능형 모바일 컴퓨팅 분야의 핵심 기술을 선도하고 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
The solar powered energy harvesting sensor node is a key technology for Internet of Things (IoT), but currently it offers only a small amount of energy storage and is capable of harvesting only a trivial amount of energy. Therefore, new technology for managing the energy associated with this sensor node is required. In particular, it is important to manage the transmission interval because the level of energy consumption during data transmission is the highest in the sensor node. If the proper t
For cognitive radio (CR), cooperation in spectrum sensing (SS) using energy detection can increase the detection of primary user signal. However, it also brings extra cooperative sensing overhead due to mutual exchange of large information among CR users. To reduce cooperative sensing overhead and improve sensing performance, the authors propose a novel clustering scheme consists of three stages: pruning , selecting , and clustering . In pruning stage, the CR users without sensing results will n
Next Point-Of-Interest (POI) recommendation aim to predict users’ next visits by mining their movement patterns. Existing works attempt to extract spatial–temporal relationships from historical check-ins; however, the following critical factors have not been adequately considered: (1) structured features implied in trajectory that reflect individual visit tendency; (2) collaborative signals from other users and (3) dynamic user preference. To this end, we jointly take into full consideration the
In this paper, we propose a novel network selection algorithm considering power consumption in hybrid wireless networks for vertical handover. CDMA, WiBro, WLAN networks are candidate networks for this selection algorithm. This algorithm is composed of the power consumption prediction algorithm and the final network selection algorithm. The power consumption prediction algorithm estimates the expected lifetime of the mobile station based on the current battery level, traffic class and power cons
Deep neural network models perform well in a variety of domains, such as computer vision, recommender systems, natural language processing, and defect detection. In contrast, in areas such as healthcare, finance, and defense, deep neural network models, due to their lack of explainability, are not trusted by users. In this paper, we focus on attention-map-guided visual explanations for deep neural networks. We employ an attention mechanism to find the most important region of an input image. The
In this paper, we propose a novel network selection algorithm considering power consumption in hybrid wireless networks for vertical handover. CDMA, WiBro, WLAN networks are candidate networks for this selection algorithm. This algorithm is composed of the power consumption prediction algorithm and the final network selection algorithm. The power consumption prediction algorithm estimates the expected lifetime of the mobile station based on the current battery level, traffic class and power cons
Deep learning researchers believe that as deep learning models evolve, they can perform well on many tasks. However, the complex parameters of deep learning models make it difficult for users to understand how deep learning models make predictions. In this paper, we propose the specific-input local interpretable model-agnostic explanations (LIME) model, a novel interpretable artificial intelligence (XAI) method that interprets deep learning models of tabular data. The specific-input process uses
Article Free Access Share on An adaptive hybrid ARQ scheme with concatenated FEC codes for wireless ATM Author: Inwhee Joe Broadband and Wireless Networking Laboratory, School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA Broadband and Wireless Networking Laboratory, School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GAView Profile Authors Info & Claims MobiCom '97: Proceedings of the 3rd annual ACM/IEEE international c
An accurate prediction of the State of Charge (SOC) of an Electric Vehicle (EV) battery is important when determining the driving range of an EV. However, the majority of the studies in this field have either been focused on the standard driving cycle (SDC) or the internal parameters of the battery itself to predict the SOC results. Due to the significant difference between the real driving cycle (RDC) and SDC, a proper method of predicting the SOC results with RDCs is required. In this paper, R
The non-terrestrial network (NTN) is a network that uses radio frequency (RF) resources mounted on satellites and includes satellite-based communications networks, high altitude platform systems (HAPS), and air-to-ground networks. The fifth generation (5G) and NTN may be crucial in utilizing communication infrastructure to provide 5G services in the future, anytime and anywhere. Based on the outcome of the Rel-16 study, the 3rd generation partnership project (3GPP) decided to start a work item o
This paper describes the design and performance of a novel medium access control (MAC) protocol, called reservation CSMA/CA for QoS (quality of service) support over mobile ad-hoc networks. The reservation CSMA/CA protocol is based on an hierarchical approach consisting of two sublayers. The lower sublayer of the MAC protocol provides a fundamental access method using CSMA/CA to support asynchronous data traffic over mobile ad-hoc networks. The upper sublayer is designed to support real-time per
eXplainable Artificial Intelligence (XAI) is a new trend of machine learning. Machine learning models are used to predict or decide something, and they derive output based on a large volume of data set. Here, the problem is that it is hard to know why such prediction was derived, especially when using deep learning models. It makes the models unreliable in the case of reliability-critical applications. So, it is required to explain how they derived such output. It is a reliability-critical appli