Jae‐Min Myoung 교수

Various fields of study consider MXene a revolutionary 2D material. Particularly in the field of sensors, the metal-like high electrical conductivity and large surface area of MXenes are desirable characteristics as an alternative sensor material that can transcend the boundaries of existing sensor technology. This critical review provides a comprehensive overview of recent advances in MXene-based sensor technology and a roadmap for commercializing MXene-based sensors. The existing sensors are s

Abstract Electrochromic materials reversibly change colors by redox reactions depending on the oxidation states. To utilize electrochromic materials for active‐matrix display applications, an electrochromic display (ECD) requires simultaneous implementation of various colors and a fine‐pixelation process. Herein, flexible and transparent ECDs with simultaneously implementable subpixelated EC gels by sequential multiple patterning are successfully demonstrated. Ionic liquid‐based EC gels of monoh

Out of the blue: Light-emitting diodes were obtained by fabricating p+-GaN film/n-ZnO nanowire array/n+-ZnO film structures (see figure). Blue electroluminescence (EL) emission was observed from the nanowire-inserted heterojunction diodes under forward bias. These diodes exhibited improved EL emission and injection current compared to those of film-based heterojunction diodes.

Abstract Due to the increasing interest in wearable devices, flexible and stretchable film heaters have been widely studied, as alternatives to heaters with conventional rigid shapes. Herein, a highly stretchable film heater (SFH) based on the silver nanowire (Ag NW)–single‐walled carbon nanotube composite with a thermochromic display on a polydimethylsiloxane (PDMS) substrate is successfully fabricated. The SFH shows excellent electrical conductivity, high mechanical stretchability, and outstan

Abstract Blue emissive perovskites can be prepared by incorporating chlorine into bromine‐based perovskites to tune their bandgap. However, mixed‐halide perovskites exhibit intrinsic phase instability, particularly under electrical potential, owing to halide migration. To achieve high‐performance blue perovskite‐based light‐emitting diodes (PeLEDs) with operational stability, organic ammonium cations are used for passivating the anionic defects of the CsPbBr 2 Cl film. Diphenylpropylammonium chl

Tactile sensors are being researched as a key technology for developing an electronic skin and a wearable display, which have recently been attracting much attention. However, to develop a next-generation wearable tactile sensor, it is necessary to implement an interactive display that responds immediately to external stimuli. Herein, a wearable and semitransparent pressure-sensitive light-emitting sensor (PLS) based on electrochemiluminescence (ECL) is successfully implemented with visual alarm

As the lighting technology evolves, the need for violet light-emitting diodes (LEDs) is growing for high color rendering index lighting. The present technology for violet LEDs is based on the high-cost GaN materials and metal-organic chemical vapor deposition process; therefore, there have recently been intensive studies on developing low-cost alternative materials and processes. In this study, for the first time, we demonstrated violet LEDs based on low-cost materials and processes using a p-Cu

Abstract Perovskite light‐emitting diodes (PeLEDs) have garnered considerable interest in recent years owing to their unique optoelectronic properties. However, the performance of PeLEDs is limited by their low quantum efficiency and unbalanced charge injection. In this study, to address these issues, a novel co‐hole transport layer (HTL) of 4,4′‐bis( N ‐carbazolyl)‐1,1′‐biphenyl (CBP) and poly(9‐vinylcarbazole) (PVK) is introduced into PeLEDs. By optimizing the composition ratio of CBP and PVK,

The morphology, crystal size, and trap density of perovskite films significantly affect the luminescent properties of perovskite light-emitting diodes (PeLEDs). Recently, numerous studies have been conducted on ligands that surround the surface of perovskite crystals and passivate the trap sites to improve the performance of PeLEDs. In this study, a 4-aminobenzonitrile (ABN) ligand improved the performance of methylammonium lead bromide (MAPbBr₃)-based PeLEDs by reducing the MAPbBr<su

Halide perovskites have potential for use in next-generation low-cost, high-efficiency, and highly color-pure light-emitting diodes (LED) that can be used in various applications, such as flat and flexible displays and solid-state lighting. However, they still lag behind other mature technologies, such as organic LEDs and inorganic LEDs, in terms of performance, particularly brightness. This lag is partly due to the insulating nature of the long-chain organic ligands used to control the perovski