Kyoto University · 공학
노리타카 사코 교수의 연구실은 우주 추진 시스템에서의 열보호 기술, 특히 비프로필런트 로켓 엔진의 노출된 부품을 고온 기체로부터 보호하기 위한 액체 필름 냉각 기법에 중점을 두고 있습니다. 주로 펄스 방식으로 작동하는 엔진에서 발생하는 열 재흡수 현상과 액체 연료의 주입에 의한 필름 형성 메커니즘을 고속 영상 및 적외선 열화상 촬영을 통해 실시간으로 분석하고 있습니다. 특히, 액체의 확산, 기화, 분무 현상 및 열전달 특성의 임계 조건을 규명함으로써 냉각 효율을 극대화하고 안전성을 확보하는 데 목적이 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
In film cooling approaches, a film of liquid fuel is formed on the chamber wall of bipropellant thrusters to protect the chamber wall from high-temperature combustion gases. To optimize the amount of liquid fuel required to sufficiently cool a chamber wall in this manner without degrading the performance of bipropellant thrusters, the formation process of the liquid film needs to be understood. To this end, in this study, factors affecting the spread of liquid film were experimentally investigat
Characteristics of boiling-induced atomization appeared in the liquid film which formed on the heated metal plate by a wall-impinging jet were experimentally investigated. The boilinginduced atomization were visualized via magnified high-speed imaging. Simultaneously, the variation of the wall temperature was measured by an infra-red camera from back side. The droplet size distribution and the ejection velocity distribution of the disintegrated small spherical particles were analysed. Results sh
View Video Presentation: https://doi.org/10.2514/6.2023-0512.vid The liquid film cooling technique was employed in bipropellant thrusters to protect the thrust chamber from high-temperature combustion gases. Heat soak-back from the throat to the face plate occurs in the interval between each pulse firing event. A liquid jet would be injected onto the superheated wall in pulse firing operation. To gain experimental knowledge for contributing to effective cooling and hazard prevention of thrusters
In a bipropellant thruster, a part of the liquid fuel is injected onto the combustion chamber wall to form a liquid film, which protect the wall from combustion gases. Particularly in the pulse operation, the fuel is injected onto a heated wall with temperature gradient formed by heat soak back from the nozzle throat. In this study, the transient processes of film formation and of wall temperature distribution were visualized by a high-speed imaging and an infrared camera, respectively. The beha
