The University of Tokyo · 공학
Ryo Higuchi 교수의 연구실은 천체물리학과 복합재료의 기계적 거동을 융합한 다학제적 연구를 수행합니다. 고 redshift 은하 집단의 형성과 진화를 탐색하는 천문학적 연구와 동시에, CFRP, CMC, PPS 등 고성능 복합재료의 미세구조적 손상 거동과 기계적 특성에 대한 수치 시뮬레이션 기반 분석을 함께 진행하고 있습니다. 특히, 섬유-매트릭스 상호작용, 크랙 전파, 냉각 속도 영향 등 미세구조적 메커니즘을 정량적으로 해석하는 데 초점을 맞추고 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
Abstract We report 14 and 26 protocluster candidates at z = 5.7 and 6.6 over 14 and 16 deg 2 areas, respectively, selected from 2230 (259) Ly α emitters (LAEs) photometrically (spectroscopically) identified using Subaru/Hyper Suprime-Cam (HSC) deep images (Keck, Subaru, and Magellan spectra, and literature data). Six out of the 40 protocluster candidates include one to 13 spectroscopically confirmed LAEs. We conduct Monte Carlo simulations to estimate how many protocluster candidates are found b
A micro-scale simulation scheme is developed in this study to evaluate in-situ damage and strength properties of CFRP laminates with various ply thicknesses. To capture both the initiation and propagation of transverse cracks, the microscopic random fiber configuration and the constraint effect from neighboring plies should be carefully considered. This study considers the representative volume element (RVE), consisting of the ‘inhomogeneous’ ply in which the solid elements individually modeled
This paper proposes numerical simulation to predict damage progression and critical strength in structural components made of 3D woven ceramic matrix composites (CMCs). This method implements three numerical approaches with the commercial finite element method. (i) Damage models are used to predict damage initiation and propagation of CMCs. (ii) The failure criterion based on the Weibull volumetric statistical strength model is implemented to take into account the size effects of fiber-bundle st
In this study, the cooling rate-dependent properties of polyphenylene sulfide (PPS) and carbon fiber reinforced PPS (CF/PPS) manufactured at different cooling rates (1, 5, and 10 °C/min) are presented. The cooling rate-dependent densities of neat PPS and CF/PPS were determined based on the Archimedes' principle. The coefficients of thermal expansion (CTEs) were determined using a thermomechanical analyzer. The stress-strain curves of neat PPS manufactured at different cooling rates under tensile
We developed novel trunk musculoskeletal models with detailed muscle paths for predicting the thoracolumbar load, and validated the developed models under dynamic loading and various postures. Two types of musculoskeletal models with different paths of the trunk muscles were constructed: a Via-Point type (with linear muscles) and Wrapping type (with curved muscles along ellipsoids). We predicted the intradiscal pressure (IDP) with the models and compared the results with literature values. The I
