UNIST · Engineering
Sang Il Seok 교수의 연구실은 고효율·고안정성 페로브스카이트 태양전지의 실용화를 목표로 하며, 특히 형아미드인(FAPbI₃) 기반 페로브스카이트 소재의 안정화와 전자적 특성 최적화에 중점을 두고 있습니다. 다중카이온 도핑, 결함 공학, 고온 저압 합성 기술 등을 통해 높은 전환 효율과 긴 수명을 확보한 소재 및 소자를 개발하고 있습니다. 또한, 상용화를 위한 수율 향상과 신뢰성 평가 기준 마련에도 기여하고 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
The band gap of formamidinium lead iodide (FAPbI3) perovskites allows broader absorption of the solar spectrum relative to conventional methylammonium lead iodide (MAPbI3). Because the optoelectronic properties of perovskite films are closely related to film quality, deposition of dense and uniform films is crucial for fabricating high-performance perovskite solar cells (PSCs). We report an approach for depositing high-quality FAPbI3 films, involving FAPbI3 crystallization by the direct intramol
The formation of a dense and uniform thin layer on the substrates is crucial for the fabrication of high-performance perovskite solar cells (PSCs) containing formamidinium with multiple cations and mixed halide anions. The concentration of defect states, which reduce a cell's performance by decreasing the open-circuit voltage and short-circuit current density, needs to be as low as possible. We show that the introduction of additional iodide ions into the organic cation solution, which are used
Perovskite solar cells (PSCs) have witnessed rapidly rising power conversion efficiencies, together with advances in stability and upscaling. Despite these advances, their limited stability and need to prove upscaling remain crucial hurdles on the path to commercialization. We summarize recent advances toward commercially viable PSCs and discuss challenges that remain. We expound the development of standardized protocols to distinguish intrinsic and extrinsic degradation factors in perovskites.
High-efficiency lead halide perovskite solar cells (PSCs) have been fabricated with α-phase formamidinium lead iodide (FAPbI<sub>3</sub>) stabilized with multiple cations. The alloyed cations greatly affect the bandgap, carrier dynamics, and stability, as well as lattice strain that creates unwanted carrier trap sites. We substituted cesium (Cs) and methylenediammonium (MDA) cations in FA sites of FAPbI<sub>3</sub> and found that 0.03 mol fraction of both MDA and Cs cations lowered lattice strai
In general, mixed cations and anions containing formamidinium (FA), methylammonium (MA), caesium, iodine, and bromine ions are used to stabilize the black α-phase of the FA-based lead triiodide (FAPbI<sub>3</sub>) in perovskite solar cells. However, additives such as MA, caesium, and bromine widen its bandgap and reduce the thermal stability. We stabilized the α-FAPbI<sub>3</sub> phase by doping with methylenediammonium dichloride (MDACl<sub>2</sub>) and achieved a certified short-circuit curren
Perovskite solar cells (PSCs) exceeding a power conversion efficiency (PCE) of 20% have mainly been demonstrated by using mesoporous titanium dioxide (mp-TiO<sub>2</sub>) as an electron-transporting layer. However, TiO<sub>2</sub> can reduce the stability of PSCs under illumination (including ultraviolet light). Lanthanum (La)-doped BaSnO<sub>3</sub> (LBSO) perovskite would be an ideal replacement given its electron mobility and electronic structure, but LBSO cannot be synthesized as well-disper
An insight into the analogies, state-of-the-art technologies, concepts, and prospects under the umbrella of perovskite materials (both inorganic-organic hybrid halide perovskites and ferroelectric perovskites) for future multifunctional energy conversion and storage devices is provided. Often, these are considered entirely different branches of research; however, considering them simultaneously and holistically can provide several new opportunities. Recent advancements have highlighted the poten
The voltage output of perovskite solar cells is found to be dependent on both the energy level of perovskite itself as a solar absorber and hole transporting materials.
Over the last several years, inorganic-organic hybrid perovskites have shown dramatic achievements in photovoltaic performance and device stability. Despite the significant progress in photovoltaic application, an in-depth understanding of the fundamentals of precursor solution chemistry is still lacking. In this review, the fundamental background knowledge of nucleation and crystal growth processes in solution including the LaMer model and Ostwald ripening process is described. This review arti
Optimal thickness of a PCBM layer and insertion of the LiF interlayer on a well-controlled flat surface of the perovskite film are essential for fabricating planar perovskite–PCBM solar cells.
The light‐harvesting Sb 2 S 3 surface on mesoporous‐TiO 2 in inorganic–organic heterojunction solar cells is sulfurized with thioacetamide (TA). The photovoltaic performances are compared before and after TA treatment, and the state of the Sb 2 S 3 is investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, and deep‐level transient spectroscopy (DLTS). Although there are no differences in crystallinity and composition, the TA‐treated solar cells exhibit significantly enhanced perform
Highly transparent and nanostructured nickel oxide (NiO) films through pulsed laser deposition are introduced for efficient CH3 NH3 PbI3 perovskite solar cells. The (111)-oriented nanostructured NiO film plays a key role in extracting holes and preventing electron leakage as hole transporting material. The champion device exhibits a power conversion efficiency of 17.3% with a very high fill factor of 0.813.
