Seung Hwan Ko 교수

A highly stretchable metal electrode is developed via the solution-processing of very long (>100 μm) metallic nanowires and subsequent percolation network formation via low-temperature nanowelding. The stretchable metal electrode from very long metal nanowires demonstrated high electrical conductivity (~9 ohm sq(-1) ) and mechanical compliance (strain > 460%) at the same time. This method is expected to overcome the performance limitation of the current stretchable electronics such as graphene,

In this paper, in order to increase the power conversion efficiency we demonstrated the selective growth of "nanoforest" composed of high density, long branched "treelike" multigeneration hierarchical ZnO nanowire photoanodes. The overall light-conversion efficiency of the branched ZnO nanowire DSSCs was almost 5 times higher than the efficiency of DSSCs constructed by upstanding ZnO nanowires. The efficiency increase is due to greatly enhanced surface area for higher dye loading and light harve

All-printed electronics is the key technology to ultra-low-cost, large-area electronics. As a critical step in this direction, we demonstrate that laser sintering of inkjet-printed metal nanoparticles enables low-temperature metal deposition as well as high-resolution patterning to overcome the resolution limitation of the current inkjet direct writing processes. To demonstrate this process combined with the implementation of air-stable carboxylate-functionalized polythiophenes, high-resolution

The future electronics will be soft, flexible and even stretchable to be more human friendly in the form of wearable computers. However, conventional electronic materials are usually brittle. Recently, carbon based materials are intensively investigated as a good candidate for flexible electronics but with limited mechanical and electrical performances. Metal is still the best material for electronics with great electrical properties but with poor transparency and mechanical performance. Here we

Abstract As an alternative to the brittle and expensive indium tin oxide (ITO) transparent conductor, a very simple, room‐temperature nanosoldering method of Ag nanowire percolation network is developed with conducting polymer to demonstrate highly flexible and even stretchable transparent conductors. The drying conducting polymer on Ag nanowire percolation network is used as a nanosoldering material inducing strong capillary‐force‐assisted stiction of the nanowires to other nanowires or to the

A facile fast laser nanoscale welding process uses the plasmonic effect at a nanowire (NW) junction to suppress oxidation and successfully fabricate a Cu-NW-based percolation-network conductor. The "nanowelding" process does not require an inert or vacuum environment. Due to the low-temperature and fast-process nature, plasmonic laser nanowelding may form Cu-nanowire networks on heat-sensitive, flexible or even stretchable substrates.

Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor-based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser-induced reductive sintering scheme and unique monolithic structures. The

Recent research progress of relieving discomfort between electronics and human body involves serpentine designs, ultrathin films, and extraordinary properties of nanomaterials. However, these strategies addressed thus far each face own limitation for achieving desired form of electronic-skin applications. Evenly matched mechanical properties anywhere on the body and imperceptibility of electronics are two essentially required characteristics for future electronic-skin (E-skin) devices. Yet accom

As is frequently seen in sci‐fi movies, future electronics are expected to ultimately be in the form of wearable electronics. To realize wearable electronics, the electric components should be soft, flexible, and even stretchable to be human‐friendly. An important step is presented toward realization of wearable electronics by developing a hierarchical multiscale hybrid nanocomposite for highly flexible, stretchable, or transparent conductors. The hybrid nanocomposite combines the enhanced mecha

One-step direct nanoimprinting of metal nanoparticles was investigated to fabricate nano-/microscale metallic structures such as nanodot and nanowire arrays. This was done at low temperatures and pressures, utilizing the low melting temperature and viscosity of metal nanoparticle solutions. Through precise control of the fluidic properties of the nanoparticle solution and the mold design, high-quality nanoscale features with no or negligible residual layer were nanoimprinted. Nanoscale electroni

Abstract To add more functionalities and overcome the limitation in conventional soft robots, highly anisotropic soft actuators with color shifting function during actuation is demonstrated for the first time. The electrothermally operating soft actuators with installed transparent metal nanowire percolation network heater allow easy programming of their actuation direction and instantaneous visualization of temperature changes through color change. Due to the unique direction dependent coeffici

State monitoring of the complex system needs a large number of sensors. Especially, studies in soft electronics aim to attain complete measurement of the body, mapping various stimulations like temperature, electrophysiological signals, and mechanical strains. However, conventional approach requires many sensor networks that cover the entire curvilinear surfaces of the target area. We introduce a new measuring system, a novel electronic skin integrated with a deep neural network that captures dy

Recent advancements in wearable electronics offer seamless integration with the human body for extracting various biophysical and biochemical information for real-time health monitoring, clinical diagnostics, and augmented reality. Enormous efforts have been dedicated to imparting stretchability/flexibility and softness to electronic devices through materials science and structural modifications that enable stable and comfortable integration of these devices with the curvilinear and soft human b

Metal-oxide nanomaterials (MONs) have gained considerable interest in the construction of flexible/wearable sensors due to their tunable band gap, low cost, large specific area, and ease of manufacturing. Furthermore, MONs are in high demand for applications, such as gas leakage alarms, environmental protection, health tracking, and smart devices integrated with another system. In this Review, we introduce a comprehensive investigation of factors to boost the sensitivity of MON-based sensors in

The patterning of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hydrogels with excellent electrical property and spatial resolution is a challenge for bioelectronic applications. However, most PEDOT:PSS hydrogels are fabricated by conventional manufacturing processes such as photolithography, inkjet printing, and screen printing with complex fabrication steps or low spatial resolution. Moreover, the additives used for fabricating PEDOT:PSS hydrogels are mostly cytotoxic, t