한승민 교수

Deformation behavior of the Ag nanowire flexible transparent electrode under bending strain is studied and results in a novel approach for highly reliable Ag nanowire network with mechanically welded junctions. Bending fatigue tests up to 500,000 cycles are used to evaluate the in situ resistance change while imposing fixed, uniform bending strain. In the initial stages of bending cycles, the thermally annealed Ag nanowire networks show a reduction in fractional resistance followed by a transien

Polymer nanocomposites with inclusion of ceramic nanofillers have relatively high yield strength, elastic moduli, and toughness that therefore are widely used as functional coating and films for optoelectronic applications. Although the mechanical properties are enhanced with increasing the fraction of nanofiller inclusion, there generally is an upper limit on the amount of nanofiller inclusion because the aggregation of the fillers in the polymer matrix, which typically occurs, degrades the mec

Porous network structures (e.g. metal-organic frameworks, MOFs) show considerable potential in dethroning monoethanol amine (MEA) from being the dominant scrubber for CO2 at the fossil-fuel-burning power generators. In contrast to their promise, structural stability and high-pressure behavior of MOFs are not well documented. We herein report moisture stability, mechanical properties and high-pressure compression on a model MOF structure, MOF-5. Our results show that MOF-5 can endure all tested p

The size-dependent plasticity of body centered cubic (bcc) metals is different from face centered cubic (fcc) metals: the size-effect exponent n varies for different bcc metal nanopillars (n = 0.8–1.0 for V, Nb; n = 0.3–0.5 for Ta, Mo, W). This inconsistency is first explained through a simple model based on the temperature-dependent Peierls stress. The bcc V nanopillars with a low critical temperature and Peierls stress showed a fcc-like size effect with n = 0.79, and our in-situ TEM compressio

Abstract Emerging flexible optoelectronics requires a new type of protective material that is not only hard but also flexible. Organic–inorganic (O–I) hybrid materials have been used as a flexible cover window to increase wear resistance and polymer‐like flexibility. However, the hardness of O–I hybrid materials is much lower than that of metals and ceramics due to the low intrinsic hardness of the organic matrix and limited volume fraction of inorganic reinforcement. Herein, a new type of hybri

In this study, we report the size-dependent transition of deformation twinning studied using in situ SEM/TEM tensile testing of defect-free [110] Au nanowires/ribbons with controlled geometry. The critical dimension below which the ordinary plasticity transits to deformation twinning is experimentally determined to be ∼170 nm for Au nanowires with equilateral cross-sections. Nanoribbons with a fixed thickness but increased width-to-thickness ratios (9 : 1) were also studied to show that an incre

The role of RGO in chemical and mechanical reliability was studied for Ag nanowire/RGO hybrid electrode. RGO deposition can be effective in reducing the oxidation while maintaining the superior mechanical reliability under cyclic bendings.