Sung Kyu Park 교수

Wearable electronics are emerging as a platform for next-generation, human-friendly, electronic devices. A new class of devices with various functionality and amenability for the human body is essential. These new conceptual devices are likely to be a set of various functional devices such as displays, sensors, batteries, etc., which have quite different working conditions, on or in the human body. In these aspects, electronic textiles seem to be a highly suitable possibility, due to the unique

Using the small molecule organic semiconductor 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-pentacene), the authors have fabricated the solution-processed organic thin film transistors (OTFTs) with carrier mobility >1cm2∕Vs, current on/off ratio greater than 107, and subthreshold slope <0.3V/decade. The high mobility TIPS-pentacene solution-processed films are deposited from high boiling point solvents and show strong molecular ordering including molecular terracing. Film or

The combination of a neuromorphic architecture and photonic computing may open up a new era for computational systems owing to the possibility of attaining high bandwidths and the low-computation-power requirements. Here, the demonstration of photonic neuromorphic devices based on amorphous oxide semiconductors (AOSs) that mimic major synaptic functions, such as short-term memory/long-term memory, spike-timing-dependent plasticity, and neural facilitation, is reported. The synaptic functions are

Emulating the biological visual perception system typically requires a complex architecture including the integration of an artificial retina and optic nerves with various synaptic behaviors. However, self-adaptive synaptic behaviors, which are frequently translated into visual nerves to adjust environmental light intensities, have been one of the serious challenges for the artificial visual perception system. Here, an artificial optoelectronic neuromorphic device array to emulate the light-adap

Neuromorphic electronics draw attention as innovative approaches that facilitate hardware implementation of next‐generation artificial intelligent system including neuromorphic in‐memory computing, artificial sensory perception, and humanoid robotics. Among the various neuromorphic devices, optoelectronic synapses are promising neuromorphic devices that use optical means to mimic synaptic plasticity and related functions. Compared with classical neuromorphic chip based on electronic synapses usi

Ink-jet printed small-molecule organic single-crystal transistors are realized by using selective surface energy modification, precise control of volume density of ink droplets on spatially patterned areas, and a co-solvent system to control solvent evaporation properties. The single-crystal formation in bottom-contact-structured transistors via direct printing is expected to permit high-density array fabrication in large-area electronics.

Incorporation of Zr into an AlOx matrix generates an intrinsically activated ZAO surface enabling the formation of a stable semiconducting IGZO film and good interfacial properties. Photochemically annealed metal-oxide devices and circuits with the optimized sol-gel ZAO dielectric and IGZO semiconductor layers demonstrate the high performance and electrically/mechanically stable operation of flexible electronics fabricated via a low-temperature solution process.

Artificial photonic synapses are emerging as a promising implementation to emulate the human visual cognitive system by consolidating a series of processes for sensing and memorizing visual information into one system. In particular, mimicking retinal functions such as multispectral color perception and controllable nonvolatility is important for realizing artificial visual systems. However, many studies to date have focused on monochromatic-light-based photonic synapses, and thus, the emulation

In this study, we investigated the basic mechanical properties of indium–tin–oxide (ITO) films on polymer substrates which are exposed to externally inducing bending force. By using the Storney formula including the triple layer structure and bulge tests for measuring the conductive changes of patterned ITO islands as a function of bending curvature, the mechanical stability of ITO films on polymer substrates was intensively investigated. Numerical analyses and experimental results show that ext

Mimicking human skin sensation such as spontaneous multimodal perception and identification/discrimination of intermixed stimuli is severely hindered by the difficulty of efficient integration of complex cutaneous receptor-emulating circuitry and the lack of an appropriate protocol to discern the intermixed signals. Here, a highly stretchable cross-reactive sensor matrix is demonstrated, which can detect, classify, and discriminate various intermixed tactile and thermal stimuli using a machine-l

A new strategy is reported to achieve high-mobility, low-off-current, and operationally stable solution-processable metal-oxide thin-film transistors (TFTs) using a corrugated heterojunction channel structure. The corrugated heterojunction channel, having alternating thin-indium-tin-zinc-oxide (ITZO)/indium-gallium-zinc-oxide (IGZO) and thick-ITZO/IGZO film regions, enables the accumulated electron concentration to be tuned in the TFT off- and on-states via charge modulation at the vertical regi

Mechanically stretchable strain sensors gain tremendous attention for bioinspired skin sensation systems and artificially intelligent tactile sensors. However, high-accuracy detection of both strain intensity and direction with simple device/array structures is still insufficient. To overcome this limitation, an omnidirectional strain perception platform utilizing a stretchable strain sensor array with triangular-sensor-assembly (three sensors tilted by 45°) coupled with machine learning (ML) -b