한양대학교 · Engineering
Sungchul Bae 교수의 연구실은 세라믹 및 시멘트 기반 재료의 나노구조 제어와 환경친화적 응용을 중심으로 연구를 진행하고 있습니다. 특히 생체용으로 사용 가능한 마그네슘 합금, 크롬 오염 제거를 위한 고체 재료, 그리고 케이지-실리케이트-하이드레이트(C–S–H)의 원자적 구조 변화와 기계적 거동에 대한 깊은 이해를 바탕으로 한 고성능 케미컬 콘크리트 및 나노복합재 개발에 주력하고 있습니다. 또한, 전기화학적 에너지 저장 소재와 나노복합재의 상호작용 메커니즘을 규명하는 데에도 기여하고 있습니다.
표시된 성과는 수집된 데이터 기준으로 산출되며, 일부 차이가 있을 수 있습니다.
Magnesium (Mg) and its alloys have recently gained increasing attention in the biomedical field as promising biodegradable materials with harmless degradation products. Magnesium-based alloys have a wide range of biomedical applications because of their outstanding biocompatibility and unique mechanical properties. Widespread use of Mg-based biomedical devices eliminates the need for post-healing biomaterial removal surgery and minimizes the negative consequences of the implantation of permanent
Ni–Co-LDH has recently been examined for its potential as battery-type hybrid supercapacitors made from metal hydroxide electrode materials, due to their unique spatial structure, excellent electrochemical activity, and good electrical conductivity.
Using ground granulated blast-furnace slag (GGBS) under different alkaline conditions, we studied the mechanisms and extents of Cr(VI) reduction and sorption and compared them to reactions with Portland cement (PC). We also investigated the effects of mixing PC/GGBS ratios on Cr(VI) dissolution after carbonating the substrates. We observed a complete sorption and reduction of Cr(VI) to Cr(III) in a GGBS-in-Ca(OH)₂ solution (pH > ~12.5) after 10 h, whereas in distilled water (pH = ~11.5) GGBS exh
Morphological details of calcium silicate hydrate (C–S–H) stemming from the hydration process of Portland cement ( PC ) phases are crucial for understanding the PC ‐based systems but are still only partially known. Here we introduce the first soft X‐ray ptychographic imaging of tricalcium silicate (C 3 S) hydration products. The results are compared using both scanning transmission X‐ray and electron transmission microscopy data. The evidence shows that ptychography is a powerful method to visua
Abstract This study aims to elucidate the effect of heating on the local atomic arrangements, structure, phase transformation, and mechanical properties of synthesized calcium–silicate–hydrate (C–S–H). The alteration in the atomic arrangement of the synthesized C–S–H (Ca/Si =0.8) and the formation of crystalline phases that occurred in three distinct transformation stages of dehydration (105°C–200°C), decomposition (300°C–600°C), and recrystallization (700°C–1000°C) were investigated via powder
