Tasuku Nakajima 교수

We elucidate why the anomalous high strength of double network gels is obtained when the second network is polymerized without any cross-linkers. We have synthesized truly independent-DN gels (named “t-DN” gels), which do not have any covalent bonds between the first and the second networks, and showed that the t-DN gels cannot be toughened by the un-cross-linked second network. It means that the high strength of usual DN gels without the cross-linker of the second network is actually achieved b

Previously we revealed that the high toughness of double network hydrogels (DN gels) derives from the internal fracture of the brittle network during deformation, which dissipates energy as sacrificial bonds. In this study, we intend to elucidate the detailed internal fracture process of DN gels. We quantitatively analysed the tensile hysteresis and re-swelling behaviour of a DN gel that shows a well-defined necking and strain hardening, and obtained the following new findings: (1) fracture of t

Abstract Double‐network hydrogels (DN gels), despite their high water content, are the strongest and toughest soft and wet materials available. However, in conventional DN gels, which show extraordinarily high mechanical performance comparable to that of industrial rubbers, the first network must be a strong polyelectrolyte and this requirement greatly hinders the widespread application of these gels. A general method involving the use of a “molecular stent” for the synthesis of tough DN gels us

To investigate the effect of inhomogeneity in the first network on the enormously high toughness of double network (DN) gels, we fabricated DN gels with a nearly homogeneous first network structure (named St-TPEG/PAAm DN gels) based on tetra-PEG (TPEG) gels via a molecular stent method. The St-TPEG/PAAm DN gels also show excellent mechanical properties and yielding-like phenomena comparable to conventional DN gels. This result demonstrates that the inhomogeneity within the first network is not e

In this work, we intended to investigate the relationship between the swelling ratio Q and Young's modulus E of hydrogels from their contracted state to extreme swelling state and elucidate the underlining molecular mechanism. For this purpose, we used tetra-poly(ethylene glycol) (tetra-PEG) gel, whose network parameters are well known, as the polymer backbone, and we succeeded in tuning the swelling of the gel by a factor of 1500 times while maintaining the topological structure of the network

Double-network (DN) hydrogels have recently been demonstrated to generate numerous radicals by the homolytic bond scission of the brittle first network under the influence of an external force. The mechanoradicals thus generated can be utilized to trigger polymerization inside the gels, resulting in significant mechanical and functional improvements to the material. Although the concentration of mechanoradicals in DN gels is much higher than that in single-network hydrogels, a further increase i

Abstract Introduction of soft filler in a hard body, which is one of the common toughening methods of hard polymeric materials, was applied for further toughening of robust double network (DN) hydrogels composed of poly(2‐acrylamido‐2‐methylpropanesulfonic acid) gels (PAMPS gels) as the first component and polyacrylamide (PAAm) as the second component. The fracture energy of the DN gels with the void structure (called void‐DN gels) became twice when the volume fraction of void was 1–3 vol % and

The creation of double network hydrogels (DN gels), which show extremely high mechanical strength, enable hydrogels to be applied both in medical and industrial fields. However, one obstacle for various applications is the lack of formability of DN gels, owing to the brittleness of the first network PAMPS gels. In order to overcome this problem, we synthesized free-shaped DN gels (called PVA-DN gels) by using a physically cross-linked PVA gel as an “internal mold”. PVA-DN gels can form any compl