홍용택 교수

The development of highly sensitive pressure sensors with a low-cost and facile fabrication technique is desirable for electronic skins and wearable sensing devices. Here a low-cost and facile fabrication strategy to obtain multiscale-structured elastomeric electrodes and a highly sensitive and robust flexible pressure sensor is presented. The principles of spontaneous buckle formation of the PDMS surface and the embedding of silver nanowires are used to fabricate the multiscale-structured elast

Development of highly sensitive pressure sensors that function well even in bending environments and operate at ultralow voltage is desirable for wearable applications. Here, a highly sensitive and bendable capacitive pressure sensor with the ability to distinguish pressure and bending stimuli and a pressure‐sensitive transistor (PST) that can be easily integrated into wearable sensor system due to ultralow voltage (as low as 1 V for stable signal detection) operation is demonstrated. By introdu

We report the formation of lateral-crack-free silver electrodes on highly pre-stretched poly(dimethylsiloxane) (PDMS) substrates using the inkjet-printing method followed by an annealing process under the pre-stretched state. Due to Poisson's effect, cracks are easily obtained in the direction lateral to the pre-stretching and releasing directions when the highly pre-stretched substrate is released after the electrode formation. In our method, however, Poisson's effect is suppressed significantl

A novel property of the negatively strain-dependent electrical resistance change of nickel conductive composites is presented. The composite shows negatively strain-dependent resistance change when magnetically arranged, while most conductive materials show opposite behavior. This negative dependency is utilized to produce highly stretchable electrodes and to demonstrate a new conceptual resolution-sustainable stretchable lighting/display device.

Abstract A stretchable display would be the ultimate form factor for the next generation of displays beyond the curved and foldable configurations that have enabled the commercialization of deformable electronic applications. However, because conventional active devices are very brittle and vulnerable to mechanical deformation, appropriate strategies must be developed from the material and structural points of view to achieve the desired mechanical stretchability without compromising electrical

Abstract Inkjet and transfer printing processes are combined to easily form patterned poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as top anodes of all solution–processed inverted polymer light emitting diodes (PLEDs) on rigid glass and flexible plastic substrates. An adhesive PEDOT:PSS ink is formulated and fully customizable patterns are obtained using the inkjet printing process. In order to transfer the patterned PEDOT:PSS films, adhesion properties at interfaces

Soft features in electronic devices have provided an opportunity of gleaning a wide spectrum of intimate biosignals. Lack of data processing tools in a soft form, however, proclaims the need of bulky wires or low‐performance near‐field communication externally linked to a “rigid” processor board, thus tarnishing the true meaning of “soft” electronics. Furthermore, although of rising interest in stretchable hybrid electronics, lack of consideration in multilayer, miniaturized design and system‐le

Precise monitoring of human body signals can be achieved by soft, conformal contact and precise arrangement of wearable devices to the desired body positions. So far, no design and fabrication methodology in soft wearable devices is able to address the variations in the form factor of the human body such as the various sizes and shapes of individual body parts, which can significantly cause misalignments and the corresponding inaccurate monitoring. Here, a concept of soft modular electronic bloc

Abstract Liquid metals (LMs) are a special case of metals that exist in a liquid at room temperature, making them one of the most attractive conductive materials in stretchable electronics. In many cases, however, the LM attacks other metals in contact with the LM through penetration, embrittlement, and alloying. To address these critical issues, there have been efforts to introduce robust barriers, which can preserve the underlying metals without degradation. For example, graphene is employed a

Silent communication based on biosignals from facial muscle requires accurate detection of its directional movement and thus optimally positioning minimum numbers of sensors for higher accuracy of speech recognition with a minimal person-to-person variation. So far, previous approaches based on electromyogram or pressure sensors are ineffective in detecting the directional movement of facial muscles. Therefore, in this study, high-performance strain sensors are used for separately detecting <i>x

Abstract Silver nanowires (AgNWs) have been considered as replacements of indium tin oxide (ITO) due to superior optoelectronic properties and mechanical stability for flexible electronics. However, high cost and process complexity of patterning process disturb their applicability to commercial products. Herein, a facile patterning method of AgNWs by using inkjet‐printed conductive polymer templates is developed, which can be applied on various surfaces including super hydrophobic light‐emitting

Abstract Stretchable organic light‐emitting diodes (OLEDs) have been considered as a promising technology for next‐generation free‐form and wearable displays. However, an approach to ensure both high device performance and high resolution has not yet been suggested. While introducing a wrinkled structure in the active pixel areas is a decent method, the formation of out‐of‐plane macroscopic wrinkles having a wavelength of a few hundred µm has caused distortion in the shape of the pixel, which is

Strain sensors capable of monitoring complex human motions are highly desirable for the development of wearable electronic devices and healthcare monitoring systems. Excellent sensitivity and a wide working range of the sensor material are important requirements for distinguishing dynamic human motion. In this study, a highly stretchable strain sensor was fabricated via inkjet printing of single-walled carbon nanotube (SWCNT) thin films on a stretchable polydimethylsiloxane substrate. The sensor

A facile method based on the addition of diluted acid into an aqueous SWCNT dispersion significantly improves the deposition rate of a solution-processed SWCNT layer by controlling the chemical states of the dispersion.

Abstract Conductive thin films are typically subject to crack formation and propagation under tensile strain, turning into insulating films due to complete breakage at large strain. However, if such crack propagation can be intentionally designed, repetitive resistance change can be obtained and used for implementation of high-performance strain sensors that are suitable for biocompatible and stretchable electronic applications. In this work, therefore, we introduce a fiber-reinforced region, wh