박영석 교수

We compare the low bias conductance of a series of alkanes terminated on their ends with dimethyl phosphines, methyl sulfides, and amines and find that junctions formed with dimethyl phosphine terminated alkanes have the highest conductance. We see unambiguous conductance signatures with these link groups, indicating that the binding is well-defined and electronically selective. This allows a detailed analysis of the single-molecule junction elongation properties which correlate well with calcul

Abstract Recent advances in perovskite solar cells (PSCs) performance have been closely related to improved interfacial engineering and charge selective contacts. Here, a novel and cost‐competitive phenothiazine based, self‐assembled monolayer (SAM) as a hole‐selective contact for p‐i‐n PSCs is introduced. The molecularly tailored SAM enables an energetically well‐aligned interface with the perovskite absorber, with minimized nonradiative interfacial recombination loss, thus dramatically improvi

Abstract Inverted type perovskite solar cells (PSCs) have recently emerged as a major focus in academic and industrial photovoltaic research. Their multiple advantages over conventional PSCs include easy processing, hysteresis‐free behavior, high stability, and compatibility for tandem applications. However, the maximum power conversion efficiency (PCE) of inverted PSCs still lags behind those of conventional PSCs because suitable charge‐selective materials for inverted PSCs are limited. In this

We compare the conductance of 1,4-bis(methylthio)benzene with that of 2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b']dithiophene and the conductance of 1,4-bis(methylseleno)benzene with that of 2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b']diselenophene and show explicitly that the orientation of an Au-S or Au-Se bond relative to the aromatic pi system controls electron transport through conjugated molecules. Specifically, we have found that the conduction pathway connects the Au electrodes to the aromatic pi-syst

We report the synthesis of a tellurophene-containing low-bandgap polymer, PDPPTe2T, by microwave-assisted palladium-catalyzed ipso-arylative polymerization of 2,5-bis[(α-hydroxy-α,α-diphenyl)methyl]tellurophene with a diketopyrrolopyrrole (DPP) monomer. Compared with the corresponding thiophene analog, PDPPTe2T absorbs light of longer wavelengths and has a smaller bandgap. Bulk heterojunction solar cells prepared from PDPPTe2T and PC71 BM show PCE values of up to 4.4%. External quantum efficienc

Carbon-based materials, such as acenes, fullerenes, and graphene nanoribbons, are viewed as the potential successors to silicon in the next generation of electronics. Although a number of methodologies provide access to these materials' all-carbon variants, relatively fewer strategies readily furnish their nitrogen-doped analogues. Herein, we report the rational design, preparation, and characterization of nitrogen-containing rubicenes and tetrabenzopentacenes, which can be viewed either as acen

We report a general strategy for fine-tuning the bandgap of donor-acceptor-donor based organic molecules by modulating the electron-donating ability of the donor moiety by changing the benzochalcogenophene donor groups from benzothiophenes to benzoselenophenes to benzotellurophenes. These molecules show red-shifts in absorption and external quantum efficiency maxima from sulfur to selenium to tellurium. In bulk heterojunction solar cell devices, the benzoselenophene derivative shows a power conv

Polycyclic aromatic hydrocarbons (PAHs) are key components of organic electronics. The electronic properties of these carbon-rich materials can be controlled through doping with heteroatoms such as B and N, however, few convenient syntheses of BN-doped PAHs have been reported. Described herein is the rationally designed, two-step syntheses of previously unknown ixene and BN-doped ixene (B₂ N₂ -ixene), and their characterizations. Compared to ixene, B₂ N<sub>2</su

Abstract Carbon‐based materials, such as acenes, fullerenes, and graphene nanoribbons, are viewed as the potential successors to silicon in the next generation of electronics. Although a number of methodologies provide access to these materials’ all‐carbon variants, relatively fewer strategies readily furnish their nitrogen‐doped analogues. Herein, we report the rational design, preparation, and characterization of nitrogen‐containing rubicenes and tetrabenzopentacenes, which can be viewed eithe

A new series of hyperbranched aromatic polyesters containing azoxybenzene mesogens and polymethylene spacers were prepared by polymerizing AB2 type monomers that have the isophthaloyl dicarboxylic acid terminal at one end and the p-oxyp henol terminal at the other end. The monomers contain a built-in azoxybenzene mesogen that is linked to the terminal groups through polymethylene spacers. The polyesters prepared were characterized by solution viscosity, differential scanning calorimetry, X-ray d

We have studied the liquid crystalline properties of two new series of dimeric compounds consisting of a central malonic acid moiety, polymethylene spacers, and Schiff&amp;apos;s base mesogens. In the first series we changed the length of the spacers with the terminal chain fixed as the butoxy group; in the second series we changed the length of the terminal alkyl or alkoxy groups while keeping the spacers fixed as decamethylene groups. In the first series, as the length of the spacer increased,

Abstract We report the synthesis of a tellurophene‐containing low‐bandgap polymer, PDPPTe2T, by microwave‐assisted palladium‐catalyzed ipso ‐arylative polymerization of 2,5‐bis[(α‐hydroxy‐α,α‐diphenyl)methyl]tellurophene with a diketopyrrolopyrrole (DPP) monomer. Compared with the corresponding thiophene analog, PDPPTe2T absorbs light of longer wavelengths and has a smaller bandgap. Bulk heterojunction solar cells prepared from PDPPTe2T and PC 71 BM show PCE values of up to 4.4 %. External quant

Abstract Polycyclic aromatic hydrocarbons (PAHs) are key components of organic electronics. The electronic properties of these carbon‐rich materials can be controlled through doping with heteroatoms such as B and N, however, few convenient syntheses of BN‐doped PAHs have been reported. Described herein is the rationally designed, two‐step syntheses of previously unknown ixene and BN‐doped ixene (B 2 N 2 ‐ixene), and their characterizations. Compared to ixene, B 2 N 2 ‐ixene absorbs longer‐wavele

Confinement of reactants within nanoscale spaces of low-dimensional materials has been shown to provide reorientation of strained reactants or stabilization of unstable reactants for synthesis of molecules and tuning of chemical reactivity. While few studies have reported chemistry within zero-dimensional pores and one-dimensional nanotubes, organic reactions in confined spaces between two-dimensional materials have yet to be explored. Here, we demonstrate that reactants confined between atomica