Byung Hee Hong

We report the synthesis of single-crystalline silver nanowires of atomic dimensions. The ultrathin silver wires with 0.4 nanometer width grow up to micrometer-scale length inside the pores of self-assembled calix[4]hydroquinone nanotubes by electro-/photochemical redox reaction in an ambient aqueous phase. The present subnanowires are very stable under ambient air and aqueous environments, unlike previously reported metal wires of approximately 1 nanometer diameter, which existed only transientl

The first micrometer-sized graphene flakes extracted from graphite demonstrated outstanding electrical, mechanical and chemical properties, but they were too small for practical applications. However, the recent advances in graphene synthesis and transfer techniques have enabled various macroscopic applications such as transparent electrodes for touch screens and light-emitting diodes (LEDs) and thin-film transistors for flexible electronics in particular. With such exciting potential, a great d

ADVERTISEMENT RETURN TO ISSUEPREVCommunicationNEXTSelf-Assembled Arrays of Organic Nanotubes with Infinitely Long One-Dimensional H-Bond ChainsByung Hee Hong, Jin Yong Lee, Chi-Wan Lee, Jong Chan Kim, Sung Chul Bae, and Kwang S. KimView Author Information National Creative Research Initiative Center for Superfunctional Materials and Department of Chemistry Division of Molecular and Life Sciences Pohang University of Science and Technology Pohang 790-784, Korea Cite this: J. Am. Chem. Soc. 2001,

Over the last decade, interest in graphene has surged because of its unprecedented physical, chemical, electrical, and mechanical properties. In recent years, researchers' interests have gradually shifted to other notable properties of graphene - its environmentally-friendly nature with outstanding optical properties. Thus, graphene is considered to be a promising and attractive candidate for various biomedical applications such as NIR-responsive cancer therapy and fluorescence bio-imaging. To t

The potential of graphene as a mesenchymal stem cell (MSC) culture substrate to promote cardiomyogenic differentiation is demonstrated. Graphene exhibits no sign of cytotoxicity for stem cell culture. MSCs are committed toward cardiomyogenic lineage by simply culturing them on graphene. This may be attributed, at least partially, to the regulation of expression levels of extracellular matrix and signaling molecules.

Hydrophobic self-assembled monolayers (SAMs) with alkyl chains of various lengths were inserted between CVD-grown graphene layers and their SiO2 substrates (figure). As the SAM alkyl chain length increased, substrate-induced doping was suppressed by the ordered close-packed structure of SAMs with long alkyl chains. Accordingly, graphene transistors constructed on SAMs with long alkyl chains exhibited higher electron/hole mobilities with lower Dirac point voltages. Graphene has received considera

We report the growth of ultralong (>10 cm) multi-walled and single-walled carbon nanotubes such that the length is limited by the size of the furnace rather than by the termination of growth. The disturbance of microscale laminar flows results in disordered or shorter growth of carbon nanotubes. By downsizing reaction pipes, reaction gas flows are stabilized with low Reynolds numbers. In this way, the catalyst nanoparticles at the end of growing carbon nanotubes can travel a longer distance to g

We demonstrate low-temperature growth and direct transfer of graphene-graphitic carbon films (G-GC) onto plastic substrates without the use of supporting materials. In this approach, G-GC films were synthesized on copper layers by using inductively coupled plasma enhanced chemical vapor deposition, enabling the growth of few-layer graphene (G) on top of Cu and the additional growth of graphitic carbon (GC) films above the graphene layer at temperatures as low as 300 °C. The patterned G-GC films

High-quality N-doped graphene quantum sheets are successfully fabricated from as-grown monolayer graphene on Cu using nitrogen plasma, which can be transferred as a film-like layer or easily dispersed in an organic solvent for further optoelectronic or photoelectrochemical applications.

Recent development in mobile electronic devices and electric vehicles requires electrical wires with reduced weight as well as enhanced stability. In addition, since electric energy is mostly generated from power plants located far from its consuming places, mechanically stronger and higher electric power transmission cables are strongly demanded. However, there has been no alternative materials that can practically replace copper materials. Here, we report a method to prepare ultrastrong graphe

2D materials, such as graphene, exhibit great potential as functional materials for numerous novel applications due to their excellent properties. The grafting of conventional micropatterning techniques on new types of electronic devices is required to fully utilize the unique nature of graphene. However, the conventional lithography and polymer-supported transfer methods often induce the contamination and damage of the graphene surface due to polymer residues and harsh wet-transfer conditions.

Transition metal dichalcogenides (TMDs) have attracted significant interest as one of the key materials in future electronics such as logic devices, optoelectrical devices, and wearable electronics. However, a complicated synthesis method and multistep processes for device fabrication pose major hurdles for their practical applications. Here, we introduce a direct and rapid method for layer-selective synthesis of MoS₂ and WS₂ structures in wafer-scale using a pulsed laser a

We report a simple but powerful method for engineering multi-walled carbon nanotubes (MWNTs) by using manipulation by an atomic-force microscope. The successive shell-by-shell extraction process of ultralong MWNTs allows the exposure of the innermost single-walled carbon nanotubes (SWNTs), which have diameters as small as approximately 0.4 nm. The inner-shell extraction process changes the electrical characteristics of the MWNTs. Whereas the outer hollowed-out nanotubes show either metallic or s